| Current File : //usr/src/linux-headers-6.8.0-60/include/linux/platform_data/gpio-omap.h |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* OMAP GPIO handling defines and functions
*
* Copyright (C) 2003-2005 Nokia Corporation
*
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*/
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
#ifndef __ASSEMBLER__
#include <linux/io.h>
#include <linux/platform_device.h>
#endif
#define OMAP1_MPUIO_BASE 0xfffb5000
/*
* These are the omap15xx/16xx offsets. The omap7xx offset are
* OMAP_MPUIO_ / 2 offsets below.
*/
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x04
#define OMAP_MPUIO_IO_CNTL 0x08
#define OMAP_MPUIO_KBR_LATCH 0x10
#define OMAP_MPUIO_KBC 0x14
#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18
#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c
#define OMAP_MPUIO_KBD_INT 0x20
#define OMAP_MPUIO_GPIO_INT 0x24
#define OMAP_MPUIO_KBD_MASKIT 0x28
#define OMAP_MPUIO_GPIO_MASKIT 0x2c
#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
#define OMAP_MPUIO_LATCH 0x34
#define OMAP34XX_NR_GPIOS 6
/*
* OMAP1510 GPIO registers
*/
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
#define OMAP1510_GPIO_INT_CONTROL 0x0c
#define OMAP1510_GPIO_INT_MASK 0x10
#define OMAP1510_GPIO_INT_STATUS 0x14
#define OMAP1510_GPIO_PIN_CONTROL 0x18
#define OMAP1510_IH_GPIO_BASE 64
/*
* OMAP1610 specific GPIO registers
*/
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
#define OMAP1610_GPIO_IRQSTATUS1 0x0018
#define OMAP1610_GPIO_IRQENABLE1 0x001c
#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
#define OMAP1610_GPIO_DATAIN 0x002c
#define OMAP1610_GPIO_DATAOUT 0x0030
#define OMAP1610_GPIO_DIRECTION 0x0034
#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
/*
* OMAP7XX specific GPIO registers
*/
#define OMAP7XX_GPIO_DATA_INPUT 0x00
#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
#define OMAP7XX_GPIO_DIR_CONTROL 0x08
#define OMAP7XX_GPIO_INT_CONTROL 0x0c
#define OMAP7XX_GPIO_INT_MASK 0x10
#define OMAP7XX_GPIO_INT_STATUS 0x14
/*
* omap2+ specific GPIO registers
*/
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
#define OMAP24XX_GPIO_WAKE_EN 0x0020
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
#define OMAP24XX_GPIO_DATAIN 0x0038
#define OMAP24XX_GPIO_DATAOUT 0x003c
#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
#define OMAP24XX_GPIO_RISINGDETECT 0x0048
#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
#define OMAP24XX_GPIO_SETWKUENA 0x0084
#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
#define OMAP4_GPIO_REVISION 0x0000
#define OMAP4_GPIO_SYSCONFIG 0x0010
#define OMAP4_GPIO_EOI 0x0020
#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
#define OMAP4_GPIO_IRQSTATUS0 0x002c
#define OMAP4_GPIO_IRQSTATUS1 0x0030
#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
#define OMAP4_GPIO_IRQWAKEN0 0x0044
#define OMAP4_GPIO_IRQWAKEN1 0x0048
#define OMAP4_GPIO_IRQENABLE1 0x011c
#define OMAP4_GPIO_WAKE_EN 0x0120
#define OMAP4_GPIO_IRQSTATUS2 0x0128
#define OMAP4_GPIO_IRQENABLE2 0x012c
#define OMAP4_GPIO_CTRL 0x0130
#define OMAP4_GPIO_OE 0x0134
#define OMAP4_GPIO_DATAIN 0x0138
#define OMAP4_GPIO_DATAOUT 0x013c
#define OMAP4_GPIO_LEVELDETECT0 0x0140
#define OMAP4_GPIO_LEVELDETECT1 0x0144
#define OMAP4_GPIO_RISINGDETECT 0x0148
#define OMAP4_GPIO_FALLINGDETECT 0x014c
#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
#define OMAP4_GPIO_SETIRQENABLE1 0x0164
#define OMAP4_GPIO_CLEARWKUENA 0x0180
#define OMAP4_GPIO_SETWKUENA 0x0184
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
#define OMAP_MAX_GPIO_LINES 192
#ifndef __ASSEMBLER__
struct omap_gpio_reg_offs {
u16 revision;
u16 sysconfig;
u16 direction;
u16 datain;
u16 dataout;
u16 set_dataout;
u16 clr_dataout;
u16 irqstatus;
u16 irqstatus2;
u16 irqstatus_raw0;
u16 irqstatus_raw1;
u16 irqenable;
u16 irqenable2;
u16 set_irqenable;
u16 clr_irqenable;
u16 debounce;
u16 debounce_en;
u16 ctrl;
u16 wkup_en;
u16 leveldetect0;
u16 leveldetect1;
u16 risingdetect;
u16 fallingdetect;
u16 irqctrl;
u16 edgectrl1;
u16 edgectrl2;
u16 pinctrl;
bool irqenable_inv;
};
struct omap_gpio_platform_data {
int bank_type;
int bank_width; /* GPIO bank width */
int bank_stride; /* Only needed for omap1 MPUIO */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
bool loses_context; /* whether the bank would ever lose context */
bool is_mpuio; /* whether the bank is of type MPUIO */
u32 non_wakeup_gpios;
const struct omap_gpio_reg_offs *regs;
/* Return context loss count due to PM states changing */
int (*get_context_loss_count)(struct device *dev);
};
#endif /* __ASSEMBLER__ */
#endif