Current File : //usr/src/linux-headers-6.8.0-60/arch/parisc/include/asm/pgtable.h
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _PARISC_PGTABLE_H
#define _PARISC_PGTABLE_H

#include <asm/page.h>

#if CONFIG_PGTABLE_LEVELS == 3
#include <asm-generic/pgtable-nopud.h>
#elif CONFIG_PGTABLE_LEVELS == 2
#include <asm-generic/pgtable-nopmd.h>
#endif

#include <asm/fixmap.h>

#ifndef __ASSEMBLY__
/*
 * we simulate an x86-style page table for the linux mm code
 */

#include <linux/bitops.h>
#include <linux/spinlock.h>
#include <linux/mm_types.h>
#include <asm/processor.h>
#include <asm/cache.h>

/* This is for the serialization of PxTLB broadcasts. At least on the N class
 * systems, only one PxTLB inter processor broadcast can be active at any one
 * time on the Merced bus. */
extern spinlock_t pa_tlb_flush_lock;
#if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
extern int pa_serialize_tlb_flushes;
#else
#define pa_serialize_tlb_flushes        (0)
#endif

#define purge_tlb_start(flags)  do { \
	if (pa_serialize_tlb_flushes)	\
		spin_lock_irqsave(&pa_tlb_flush_lock, flags); \
	else \
		local_irq_save(flags);	\
	} while (0)
#define purge_tlb_end(flags)	do { \
	if (pa_serialize_tlb_flushes)	\
		spin_unlock_irqrestore(&pa_tlb_flush_lock, flags); \
	else \
		local_irq_restore(flags); \
	} while (0)

/* Purge data and instruction TLB entries. The TLB purge instructions
 * are slow on SMP machines since the purge must be broadcast to all CPUs.
 */

static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
{
	unsigned long flags;

	purge_tlb_start(flags);
	mtsp(mm->context.space_id, SR_TEMP1);
	pdtlb(SR_TEMP1, addr);
	pitlb(SR_TEMP1, addr);
	purge_tlb_end(flags);
}

extern void __update_cache(pte_t pte);

/* Certain architectures need to do special things when PTEs
 * within a page table are directly modified.  Thus, the following
 * hook is made available.
 */
#define set_pte(pteptr, pteval)			\
	do {					\
		*(pteptr) = (pteval);		\
		mb();				\
	} while(0)

#endif /* !__ASSEMBLY__ */

#define pte_ERROR(e) \
	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#if CONFIG_PGTABLE_LEVELS == 3
#define pmd_ERROR(e) \
	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, (unsigned long)pmd_val(e))
#endif
#define pgd_ERROR(e) \
	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))

/* This is the size of the initially mapped kernel memory */
#if defined(CONFIG_64BIT)
#define KERNEL_INITIAL_ORDER	26	/* 1<<26 = 64MB */
#else
#define KERNEL_INITIAL_ORDER	25	/* 1<<25 = 32MB */
#endif
#define KERNEL_INITIAL_SIZE	(1 << KERNEL_INITIAL_ORDER)

#if CONFIG_PGTABLE_LEVELS == 3
#define PMD_TABLE_ORDER	1
#define PGD_TABLE_ORDER	0
#else
#define PGD_TABLE_ORDER	1
#endif

/* Definitions for 3rd level (we use PLD here for Page Lower directory
 * because PTE_SHIFT is used lower down to mean shift that has to be
 * done to get usable bits out of the PTE) */
#define PLD_SHIFT	PAGE_SHIFT
#define PLD_SIZE	PAGE_SIZE
#define BITS_PER_PTE	(PAGE_SHIFT - BITS_PER_PTE_ENTRY)
#define PTRS_PER_PTE    (1UL << BITS_PER_PTE)

/* Definitions for 2nd level */
#if CONFIG_PGTABLE_LEVELS == 3
#define PMD_SHIFT       (PLD_SHIFT + BITS_PER_PTE)
#define PMD_SIZE	(1UL << PMD_SHIFT)
#define PMD_MASK	(~(PMD_SIZE-1))
#define BITS_PER_PMD	(PAGE_SHIFT + PMD_TABLE_ORDER - BITS_PER_PMD_ENTRY)
#define PTRS_PER_PMD    (1UL << BITS_PER_PMD)
#else
#define BITS_PER_PMD	0
#endif

/* Definitions for 1st level */
#define PGDIR_SHIFT	(PLD_SHIFT + BITS_PER_PTE + BITS_PER_PMD)
#if (PGDIR_SHIFT + PAGE_SHIFT + PGD_TABLE_ORDER - BITS_PER_PGD_ENTRY) > BITS_PER_LONG
#define BITS_PER_PGD	(BITS_PER_LONG - PGDIR_SHIFT)
#else
#define BITS_PER_PGD	(PAGE_SHIFT + PGD_TABLE_ORDER - BITS_PER_PGD_ENTRY)
#endif
#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
#define PGDIR_MASK	(~(PGDIR_SIZE-1))
#define PTRS_PER_PGD    (1UL << BITS_PER_PGD)
#define USER_PTRS_PER_PGD       PTRS_PER_PGD

#ifdef CONFIG_64BIT
#define MAX_ADDRBITS	(PGDIR_SHIFT + BITS_PER_PGD)
#define MAX_ADDRESS	(1UL << MAX_ADDRBITS)
#define SPACEID_SHIFT	(MAX_ADDRBITS - 32)
#else
#define MAX_ADDRBITS	(BITS_PER_LONG)
#define MAX_ADDRESS	(1ULL << MAX_ADDRBITS)
#define SPACEID_SHIFT	0
#endif

/* This calculates the number of initial pages we need for the initial
 * page tables */
#if (KERNEL_INITIAL_ORDER) >= (PLD_SHIFT + BITS_PER_PTE)
# define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PLD_SHIFT - BITS_PER_PTE))
#else
# define PT_INITIAL	(1)  /* all initial PTEs fit into one page */
#endif

/*
 * pgd entries used up by user/kernel:
 */

/* NB: The tlb miss handlers make certain assumptions about the order */
/*     of the following bits, so be careful (One example, bits 25-31  */
/*     are moved together in one instruction).                        */

#define _PAGE_READ_BIT     31   /* (0x001) read access allowed */
#define _PAGE_WRITE_BIT    30   /* (0x002) write access allowed */
#define _PAGE_EXEC_BIT     29   /* (0x004) execute access allowed */
#define _PAGE_GATEWAY_BIT  28   /* (0x008) privilege promotion allowed */
#define _PAGE_DMB_BIT      27   /* (0x010) Data Memory Break enable (B bit) */
#define _PAGE_DIRTY_BIT    26   /* (0x020) Page Dirty (D bit) */
#define _PAGE_REFTRAP_BIT  25   /* (0x040) Page Ref. Trap enable (T bit) */
#define _PAGE_NO_CACHE_BIT 24   /* (0x080) Uncached Page (U bit) */
#define _PAGE_ACCESSED_BIT 23   /* (0x100) Software: Page Accessed */
#define _PAGE_PRESENT_BIT  22   /* (0x200) Software: translation valid */
#define _PAGE_HPAGE_BIT    21   /* (0x400) Software: Huge Page */
#define _PAGE_USER_BIT     20   /* (0x800) Software: User accessible page */
#ifdef CONFIG_HUGETLB_PAGE
#define _PAGE_SPECIAL_BIT  _PAGE_DMB_BIT  /* DMB feature is currently unused */
#else
#define _PAGE_SPECIAL_BIT  _PAGE_HPAGE_BIT /* use unused HUGE PAGE bit */
#endif

/* N.B. The bits are defined in terms of a 32 bit word above, so the */
/*      following macro is ok for both 32 and 64 bit.                */

#define xlate_pabit(x) (31 - x)

/* this defines the shift to the usable bits in the PTE it is set so
 * that the valid bits _PAGE_PRESENT_BIT and _PAGE_USER_BIT are set
 * to zero */
#define PTE_SHIFT	   	xlate_pabit(_PAGE_USER_BIT)

/* PFN_PTE_SHIFT defines the shift of a PTE value to access the PFN field */
#define PFN_PTE_SHIFT		12

#define _PAGE_READ     (1 << xlate_pabit(_PAGE_READ_BIT))
#define _PAGE_WRITE    (1 << xlate_pabit(_PAGE_WRITE_BIT))
#define _PAGE_RW       (_PAGE_READ | _PAGE_WRITE)
#define _PAGE_EXEC     (1 << xlate_pabit(_PAGE_EXEC_BIT))
#define _PAGE_GATEWAY  (1 << xlate_pabit(_PAGE_GATEWAY_BIT))
#define _PAGE_DMB      (1 << xlate_pabit(_PAGE_DMB_BIT))
#define _PAGE_DIRTY    (1 << xlate_pabit(_PAGE_DIRTY_BIT))
#define _PAGE_REFTRAP  (1 << xlate_pabit(_PAGE_REFTRAP_BIT))
#define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT))
#define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT))
#define _PAGE_PRESENT  (1 << xlate_pabit(_PAGE_PRESENT_BIT))
#define _PAGE_HUGE     (1 << xlate_pabit(_PAGE_HPAGE_BIT))
#define _PAGE_USER     (1 << xlate_pabit(_PAGE_USER_BIT))
#define _PAGE_SPECIAL  (1 << xlate_pabit(_PAGE_SPECIAL_BIT))

#define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | _PAGE_DIRTY | _PAGE_ACCESSED)
#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
#define _PAGE_KERNEL_RO	(_PAGE_PRESENT | _PAGE_READ | _PAGE_DIRTY | _PAGE_ACCESSED)
#define _PAGE_KERNEL_EXEC	(_PAGE_KERNEL_RO | _PAGE_EXEC)
#define _PAGE_KERNEL_RWX	(_PAGE_KERNEL_EXEC | _PAGE_WRITE)
#define _PAGE_KERNEL		(_PAGE_KERNEL_RO | _PAGE_WRITE)

/* We borrow bit 23 to store the exclusive marker in swap PTEs. */
#define _PAGE_SWP_EXCLUSIVE	_PAGE_ACCESSED

/* The pgd/pmd contains a ptr (in phys addr space); since all pgds/pmds
 * are page-aligned, we don't care about the PAGE_OFFSET bits, except
 * for a few meta-information bits, so we shift the address to be
 * able to effectively address 40/42/44-bits of physical address space
 * depending on 4k/16k/64k PAGE_SIZE */
#define _PxD_PRESENT_BIT   31
#define _PxD_VALID_BIT     30

#define PxD_FLAG_PRESENT  (1 << xlate_pabit(_PxD_PRESENT_BIT))
#define PxD_FLAG_VALID    (1 << xlate_pabit(_PxD_VALID_BIT))
#define PxD_FLAG_MASK     (0xf)
#define PxD_FLAG_SHIFT    (4)
#define PxD_VALUE_SHIFT   (PFN_PTE_SHIFT-PxD_FLAG_SHIFT)

#ifndef __ASSEMBLY__

#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_USER)
#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE)
/* Others seem to make this executable, I don't know if that's correct
   or not.  The stack is mapped this way though so this is necessary
   in the short term - dhd@linuxcare.com, 2000-08-08 */
#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ)
#define PAGE_WRITEONLY  __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITE)
#define PAGE_EXECREAD   __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_EXEC)
#define PAGE_COPY       PAGE_EXECREAD
#define PAGE_RWX        __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_READ | _PAGE_WRITE | _PAGE_EXEC)
#define PAGE_KERNEL	__pgprot(_PAGE_KERNEL)
#define PAGE_KERNEL_EXEC	__pgprot(_PAGE_KERNEL_EXEC)
#define PAGE_KERNEL_RWX	__pgprot(_PAGE_KERNEL_RWX)
#define PAGE_KERNEL_RO	__pgprot(_PAGE_KERNEL_RO)
#define PAGE_KERNEL_UNC	__pgprot(_PAGE_KERNEL | _PAGE_NO_CACHE)
#define PAGE_GATEWAY    __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_GATEWAY| _PAGE_READ)


/*
 * We could have an execute only page using "gateway - promote to priv
 * level 3", but that is kind of silly. So, the way things are defined
 * now, we must always have read permission for pages with execute
 * permission. For the fun of it we'll go ahead and support write only
 * pages.
 */

	 /*xwr*/

extern pgd_t swapper_pg_dir[]; /* declared in init_task.c */

/* initial page tables for 0-8MB for kernel */

extern pte_t pg0[];

/* zero page used for uninitialized stuff */

extern unsigned long *empty_zero_page;

/*
 * ZERO_PAGE is a global shared page that is always zero: used
 * for zero-mapped memory areas etc..
 */

#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))

#define pte_none(x)     (pte_val(x) == 0)
#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
#define pte_user(x)	(pte_val(x) & _PAGE_USER)
#define pte_clear(mm, addr, xp)  set_pte(xp, __pte(0))

#define pmd_flag(x)	(pmd_val(x) & PxD_FLAG_MASK)
#define pmd_address(x)	((unsigned long)(pmd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
#define pud_flag(x)	(pud_val(x) & PxD_FLAG_MASK)
#define pud_address(x)	((unsigned long)(pud_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
#define pgd_flag(x)	(pgd_val(x) & PxD_FLAG_MASK)
#define pgd_address(x)	((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)

#define pmd_none(x)	(!pmd_val(x))
#define pmd_bad(x)	(!(pmd_flag(x) & PxD_FLAG_VALID))
#define pmd_present(x)	(pmd_flag(x) & PxD_FLAG_PRESENT)
static inline void pmd_clear(pmd_t *pmd) {
		set_pmd(pmd,  __pmd(0));
}



#if CONFIG_PGTABLE_LEVELS == 3
#define pud_pgtable(pud) ((pmd_t *) __va(pud_address(pud)))
#define pud_page(pud)	virt_to_page((void *)pud_pgtable(pud))

/* For 64 bit we have three level tables */

#define pud_none(x)     (!pud_val(x))
#define pud_bad(x)      (!(pud_flag(x) & PxD_FLAG_VALID))
#define pud_present(x)  (pud_flag(x) & PxD_FLAG_PRESENT)
static inline void pud_clear(pud_t *pud) {
	set_pud(pud, __pud(0));
}
#endif

/*
 * The following only work if pte_present() is true.
 * Undefined behaviour if not..
 */
static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }

static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; return pte; }
static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
static inline pte_t pte_mkwrite_novma(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; return pte; }

/*
 * Huge pte definitions.
 */
#ifdef CONFIG_HUGETLB_PAGE
#define pte_huge(pte)           (pte_val(pte) & _PAGE_HUGE)
#define pte_mkhuge(pte)         (__pte(pte_val(pte) | \
				 (parisc_requires_coherency() ? 0 : _PAGE_HUGE)))
#else
#define pte_huge(pte)           (0)
#define pte_mkhuge(pte)         (pte)
#endif


/*
 * Conversion functions: convert a page and protection to a page entry,
 * and a page entry and page directory to the page they refer to.
 */
#define __mk_pte(addr,pgprot) \
({									\
	pte_t __pte;							\
									\
	pte_val(__pte) = ((((addr)>>PAGE_SHIFT)<<PFN_PTE_SHIFT) + pgprot_val(pgprot));	\
									\
	__pte;								\
})

#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))

static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
{
	pte_t pte;
	pte_val(pte) = (pfn << PFN_PTE_SHIFT) | pgprot_val(pgprot);
	return pte;
}

static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }

/* Permanent address of a page.  On parisc we don't have highmem. */

#define pte_pfn(x)		(pte_val(x) >> PFN_PTE_SHIFT)

#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))

static inline unsigned long pmd_page_vaddr(pmd_t pmd)
{
	return ((unsigned long) __va(pmd_address(pmd)));
}

#define pmd_pfn(pmd)	(pmd_address(pmd) >> PAGE_SHIFT)
#define __pmd_page(pmd) ((unsigned long) __va(pmd_address(pmd)))
#define pmd_page(pmd)	virt_to_page((void *)__pmd_page(pmd))

/* Find an entry in the second-level page table.. */

extern void paging_init (void);

static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
		pte_t *ptep, pte_t pte, unsigned int nr)
{
	if (pte_present(pte) && pte_user(pte))
		__update_cache(pte);
	for (;;) {
		*ptep = pte;
		purge_tlb_entries(mm, addr);
		if (--nr == 0)
			break;
		ptep++;
		pte_val(pte) += 1 << PFN_PTE_SHIFT;
		addr += PAGE_SIZE;
	}
}
#define set_ptes set_ptes

/* Used for deferring calls to flush_dcache_page() */

#define PG_dcache_dirty         PG_arch_1

#define update_mmu_cache_range(vmf, vma, addr, ptep, nr) __update_cache(*ptep)
#define update_mmu_cache(vma, addr, ptep) __update_cache(*ptep)

/*
 * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
 * are !pte_none() && !pte_present().
 *
 * Format of swap PTEs (32bit):
 *
 *                         1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
 *   0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
 *   <---------------- offset -----------------> P E <ofs> < type ->
 *
 *   E is the exclusive marker that is not stored in swap entries.
 *   _PAGE_PRESENT (P) must be 0.
 *
 *   For the 64bit version, the offset is extended by 32bit.
 */
#define __swp_type(x)                     ((x).val & 0x1f)
#define __swp_offset(x)                   ( (((x).val >> 5) & 0x7) | \
					  (((x).val >> 10) << 3) )
#define __swp_entry(type, offset)         ((swp_entry_t) { \
					    ((type) & 0x1f) | \
					    ((offset & 0x7) << 5) | \
					    ((offset >> 3) << 10) })
#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x)		((pte_t) { (x).val })

static inline int pte_swp_exclusive(pte_t pte)
{
	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
}

static inline pte_t pte_swp_mkexclusive(pte_t pte)
{
	pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
	return pte;
}

static inline pte_t pte_swp_clear_exclusive(pte_t pte)
{
	pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
	return pte;
}

static inline pte_t ptep_get(pte_t *ptep)
{
	return READ_ONCE(*ptep);
}
#define ptep_get ptep_get

static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
{
	pte_t pte;

	pte = ptep_get(ptep);
	if (!pte_young(pte)) {
		return 0;
	}
	set_pte(ptep, pte_mkold(pte));
	return 1;
}

int ptep_clear_flush_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep);
pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep);

struct mm_struct;
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
	set_pte(ptep, pte_wrprotect(*ptep));
}

#define pte_same(A,B)	(pte_val(A) == pte_val(B))

#endif /* !__ASSEMBLY__ */


/* TLB page size encoding - see table 3-1 in parisc20.pdf */
#define _PAGE_SIZE_ENCODING_4K		0
#define _PAGE_SIZE_ENCODING_16K		1
#define _PAGE_SIZE_ENCODING_64K		2
#define _PAGE_SIZE_ENCODING_256K	3
#define _PAGE_SIZE_ENCODING_1M		4
#define _PAGE_SIZE_ENCODING_4M		5
#define _PAGE_SIZE_ENCODING_16M		6
#define _PAGE_SIZE_ENCODING_64M		7

#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4K
#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16K
#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB)
# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_64K
#endif


#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)

/* We provide our own get_unmapped_area to provide cache coherency */

#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN

#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
#define __HAVE_ARCH_PTE_SAME

#endif /* _PARISC_PGTABLE_H */
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!