Current File : //proc/thread-self/root/usr/src/linux-headers-6.8.0-59/include/net/vxlan.h
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __NET_VXLAN_H
#define __NET_VXLAN_H 1

#include <linux/if_vlan.h>
#include <linux/rhashtable-types.h>
#include <net/udp_tunnel.h>
#include <net/dst_metadata.h>
#include <net/rtnetlink.h>
#include <net/switchdev.h>
#include <net/nexthop.h>

#define IANA_VXLAN_UDP_PORT     4789
#define IANA_VXLAN_GPE_UDP_PORT 4790

/* VXLAN protocol (RFC 7348) header:
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |R|R|R|R|I|R|R|R|               Reserved                        |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |                VXLAN Network Identifier (VNI) |   Reserved    |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 * I = VXLAN Network Identifier (VNI) present.
 */
struct vxlanhdr {
	__be32 vx_flags;
	__be32 vx_vni;
};

/* VXLAN header flags. */
#define VXLAN_HF_VNI	cpu_to_be32(BIT(27))

#define VXLAN_N_VID     (1u << 24)
#define VXLAN_VID_MASK  (VXLAN_N_VID - 1)
#define VXLAN_VNI_MASK	cpu_to_be32(VXLAN_VID_MASK << 8)
#define VXLAN_HLEN (sizeof(struct udphdr) + sizeof(struct vxlanhdr))

#define VNI_HASH_BITS	10
#define VNI_HASH_SIZE	(1<<VNI_HASH_BITS)
#define FDB_HASH_BITS	8
#define FDB_HASH_SIZE	(1<<FDB_HASH_BITS)

/* Remote checksum offload for VXLAN (VXLAN_F_REMCSUM_[RT]X):
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |R|R|R|R|I|R|R|R|R|R|C|              Reserved                   |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |           VXLAN Network Identifier (VNI)      |O| Csum start  |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 * C = Remote checksum offload bit. When set indicates that the
 *     remote checksum offload data is present.
 *
 * O = Offset bit. Indicates the checksum offset relative to
 *     checksum start.
 *
 * Csum start = Checksum start divided by two.
 *
 * http://tools.ietf.org/html/draft-herbert-vxlan-rco
 */

/* VXLAN-RCO header flags. */
#define VXLAN_HF_RCO	cpu_to_be32(BIT(21))

/* Remote checksum offload header option */
#define VXLAN_RCO_MASK	cpu_to_be32(0x7f)  /* Last byte of vni field */
#define VXLAN_RCO_UDP	cpu_to_be32(0x80)  /* Indicate UDP RCO (TCP when not set *) */
#define VXLAN_RCO_SHIFT	1		   /* Left shift of start */
#define VXLAN_RCO_SHIFT_MASK ((1 << VXLAN_RCO_SHIFT) - 1)
#define VXLAN_MAX_REMCSUM_START (0x7f << VXLAN_RCO_SHIFT)

/*
 * VXLAN Group Based Policy Extension (VXLAN_F_GBP):
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |G|R|R|R|I|R|R|R|R|D|R|R|A|R|R|R|        Group Policy ID        |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |                VXLAN Network Identifier (VNI) |   Reserved    |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 * G = Group Policy ID present.
 *
 * D = Don't Learn bit. When set, this bit indicates that the egress
 *     VTEP MUST NOT learn the source address of the encapsulated frame.
 *
 * A = Indicates that the group policy has already been applied to
 *     this packet. Policies MUST NOT be applied by devices when the
 *     A bit is set.
 *
 * https://tools.ietf.org/html/draft-smith-vxlan-group-policy
 */
struct vxlanhdr_gbp {
	u8	vx_flags;
#ifdef __LITTLE_ENDIAN_BITFIELD
	u8	reserved_flags1:3,
		policy_applied:1,
		reserved_flags2:2,
		dont_learn:1,
		reserved_flags3:1;
#elif defined(__BIG_ENDIAN_BITFIELD)
	u8	reserved_flags1:1,
		dont_learn:1,
		reserved_flags2:2,
		policy_applied:1,
		reserved_flags3:3;
#else
#error	"Please fix <asm/byteorder.h>"
#endif
	__be16	policy_id;
	__be32	vx_vni;
};

/* VXLAN-GBP header flags. */
#define VXLAN_HF_GBP	cpu_to_be32(BIT(31))

#define VXLAN_GBP_USED_BITS (VXLAN_HF_GBP | cpu_to_be32(0xFFFFFF))

/* skb->mark mapping
 *
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |R|R|R|R|R|R|R|R|R|D|R|R|A|R|R|R|        Group Policy ID        |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 */
#define VXLAN_GBP_DONT_LEARN		(BIT(6) << 16)
#define VXLAN_GBP_POLICY_APPLIED	(BIT(3) << 16)
#define VXLAN_GBP_ID_MASK		(0xFFFF)

#define VXLAN_GBP_MASK (VXLAN_GBP_DONT_LEARN | VXLAN_GBP_POLICY_APPLIED | \
			VXLAN_GBP_ID_MASK)

/*
 * VXLAN Generic Protocol Extension (VXLAN_F_GPE):
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |R|R|Ver|I|P|R|O|       Reserved                |Next Protocol  |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * |                VXLAN Network Identifier (VNI) |   Reserved    |
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 * Ver = Version. Indicates VXLAN GPE protocol version.
 *
 * P = Next Protocol Bit. The P bit is set to indicate that the
 *     Next Protocol field is present.
 *
 * O = OAM Flag Bit. The O bit is set to indicate that the packet
 *     is an OAM packet.
 *
 * Next Protocol = This 8 bit field indicates the protocol header
 * immediately following the VXLAN GPE header.
 *
 * https://tools.ietf.org/html/draft-ietf-nvo3-vxlan-gpe-01
 */

struct vxlanhdr_gpe {
#if defined(__LITTLE_ENDIAN_BITFIELD)
	u8	oam_flag:1,
		reserved_flags1:1,
		np_applied:1,
		instance_applied:1,
		version:2,
		reserved_flags2:2;
#elif defined(__BIG_ENDIAN_BITFIELD)
	u8	reserved_flags2:2,
		version:2,
		instance_applied:1,
		np_applied:1,
		reserved_flags1:1,
		oam_flag:1;
#endif
	u8	reserved_flags3;
	u8	reserved_flags4;
	u8	next_protocol;
	__be32	vx_vni;
};

/* VXLAN-GPE header flags. */
#define VXLAN_HF_VER	cpu_to_be32(BIT(29) | BIT(28))
#define VXLAN_HF_NP	cpu_to_be32(BIT(26))
#define VXLAN_HF_OAM	cpu_to_be32(BIT(24))

#define VXLAN_GPE_USED_BITS (VXLAN_HF_VER | VXLAN_HF_NP | VXLAN_HF_OAM | \
			     cpu_to_be32(0xff))

struct vxlan_metadata {
	u32		gbp;
};

/* per UDP socket information */
struct vxlan_sock {
	struct hlist_node hlist;
	struct socket	 *sock;
	struct hlist_head vni_list[VNI_HASH_SIZE];
	refcount_t	  refcnt;
	u32		  flags;
};

union vxlan_addr {
	struct sockaddr_in sin;
	struct sockaddr_in6 sin6;
	struct sockaddr sa;
};

struct vxlan_rdst {
	union vxlan_addr	 remote_ip;
	__be16			 remote_port;
	u8			 offloaded:1;
	__be32			 remote_vni;
	u32			 remote_ifindex;
	struct net_device	 *remote_dev;
	struct list_head	 list;
	struct rcu_head		 rcu;
	struct dst_cache	 dst_cache;
};

struct vxlan_config {
	union vxlan_addr		remote_ip;
	union vxlan_addr		saddr;
	__be32				vni;
	int				remote_ifindex;
	int				mtu;
	__be16				dst_port;
	u16				port_min;
	u16				port_max;
	u8				tos;
	u8				ttl;
	__be32				label;
	enum ifla_vxlan_label_policy	label_policy;
	u32				flags;
	unsigned long			age_interval;
	unsigned int			addrmax;
	bool				no_share;
	enum ifla_vxlan_df		df;
};

enum {
	VXLAN_VNI_STATS_RX,
	VXLAN_VNI_STATS_RX_DROPS,
	VXLAN_VNI_STATS_RX_ERRORS,
	VXLAN_VNI_STATS_TX,
	VXLAN_VNI_STATS_TX_DROPS,
	VXLAN_VNI_STATS_TX_ERRORS,
};

struct vxlan_vni_stats {
	u64 rx_packets;
	u64 rx_bytes;
	u64 rx_drops;
	u64 rx_errors;
	u64 tx_packets;
	u64 tx_bytes;
	u64 tx_drops;
	u64 tx_errors;
};

struct vxlan_vni_stats_pcpu {
	struct vxlan_vni_stats stats;
	struct u64_stats_sync syncp;
};

struct vxlan_dev_node {
	struct hlist_node hlist;
	struct vxlan_dev *vxlan;
};

struct vxlan_vni_node {
	struct rhash_head vnode;
	struct vxlan_dev_node hlist4; /* vni hash table for IPv4 socket */
#if IS_ENABLED(CONFIG_IPV6)
	struct vxlan_dev_node hlist6; /* vni hash table for IPv6 socket */
#endif
	struct list_head vlist;
	__be32 vni;
	union vxlan_addr remote_ip; /* default remote ip for this vni */
	struct vxlan_vni_stats_pcpu __percpu *stats;

	struct rcu_head rcu;
};

struct vxlan_vni_group {
	struct rhashtable	vni_hash;
	struct list_head	vni_list;
	u32			num_vnis;
};

/* Pseudo network device */
struct vxlan_dev {
	struct vxlan_dev_node hlist4;	/* vni hash table for IPv4 socket */
#if IS_ENABLED(CONFIG_IPV6)
	struct vxlan_dev_node hlist6;	/* vni hash table for IPv6 socket */
#endif
	struct list_head  next;		/* vxlan's per namespace list */
	struct vxlan_sock __rcu *vn4_sock;	/* listening socket for IPv4 */
#if IS_ENABLED(CONFIG_IPV6)
	struct vxlan_sock __rcu *vn6_sock;	/* listening socket for IPv6 */
#endif
	struct net_device *dev;
	struct net	  *net;		/* netns for packet i/o */
	struct vxlan_rdst default_dst;	/* default destination */

	struct ip_tunnel_fan fan;

	struct timer_list age_timer;
	spinlock_t	  hash_lock[FDB_HASH_SIZE];
	unsigned int	  addrcnt;
	struct gro_cells  gro_cells;

	struct vxlan_config	cfg;

	struct vxlan_vni_group  __rcu *vnigrp;

	struct hlist_head fdb_head[FDB_HASH_SIZE];

	struct rhashtable mdb_tbl;
	struct hlist_head mdb_list;
	unsigned int mdb_seq;
};

#define VXLAN_F_LEARN			0x01
#define VXLAN_F_PROXY			0x02
#define VXLAN_F_RSC			0x04
#define VXLAN_F_L2MISS			0x08
#define VXLAN_F_L3MISS			0x10
#define VXLAN_F_IPV6			0x20
#define VXLAN_F_UDP_ZERO_CSUM_TX	0x40
#define VXLAN_F_UDP_ZERO_CSUM6_TX	0x80
#define VXLAN_F_UDP_ZERO_CSUM6_RX	0x100
#define VXLAN_F_REMCSUM_TX		0x200
#define VXLAN_F_REMCSUM_RX		0x400
#define VXLAN_F_GBP			0x800
#define VXLAN_F_REMCSUM_NOPARTIAL	0x1000
#define VXLAN_F_COLLECT_METADATA	0x2000
#define VXLAN_F_GPE			0x4000
#define VXLAN_F_IPV6_LINKLOCAL		0x8000
#define VXLAN_F_TTL_INHERIT		0x10000
#define VXLAN_F_VNIFILTER               0x20000
#define VXLAN_F_MDB			0x40000
#define VXLAN_F_LOCALBYPASS		0x80000

/* Flags that are used in the receive path. These flags must match in
 * order for a socket to be shareable
 */
#define VXLAN_F_RCV_FLAGS		(VXLAN_F_GBP |			\
					 VXLAN_F_GPE |			\
					 VXLAN_F_UDP_ZERO_CSUM6_RX |	\
					 VXLAN_F_REMCSUM_RX |		\
					 VXLAN_F_REMCSUM_NOPARTIAL |	\
					 VXLAN_F_COLLECT_METADATA |	\
					 VXLAN_F_VNIFILTER)

/* Flags that can be set together with VXLAN_F_GPE. */
#define VXLAN_F_ALLOWED_GPE		(VXLAN_F_GPE |			\
					 VXLAN_F_IPV6 |			\
					 VXLAN_F_IPV6_LINKLOCAL |	\
					 VXLAN_F_UDP_ZERO_CSUM_TX |	\
					 VXLAN_F_UDP_ZERO_CSUM6_TX |	\
					 VXLAN_F_UDP_ZERO_CSUM6_RX |	\
					 VXLAN_F_COLLECT_METADATA  |	\
					 VXLAN_F_VNIFILTER         |    \
					 VXLAN_F_LOCALBYPASS)

struct net_device *vxlan_dev_create(struct net *net, const char *name,
				    u8 name_assign_type, struct vxlan_config *conf);

static inline netdev_features_t vxlan_features_check(struct sk_buff *skb,
						     netdev_features_t features)
{
	u8 l4_hdr = 0;

	if (!skb->encapsulation)
		return features;

	switch (vlan_get_protocol(skb)) {
	case htons(ETH_P_IP):
		l4_hdr = ip_hdr(skb)->protocol;
		break;
	case htons(ETH_P_IPV6):
		l4_hdr = ipv6_hdr(skb)->nexthdr;
		break;
	default:
		return features;
	}

	if ((l4_hdr == IPPROTO_UDP) &&
	    (skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
	     skb->inner_protocol != htons(ETH_P_TEB) ||
	     (skb_inner_mac_header(skb) - skb_transport_header(skb) !=
	      sizeof(struct udphdr) + sizeof(struct vxlanhdr)) ||
	     (skb->ip_summed != CHECKSUM_NONE &&
	      !can_checksum_protocol(features, inner_eth_hdr(skb)->h_proto))))
		return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);

	return features;
}

static inline int vxlan_headroom(u32 flags)
{
	/* VXLAN:     IP4/6 header + UDP + VXLAN + Ethernet header */
	/* VXLAN-GPE: IP4/6 header + UDP + VXLAN */
	return (flags & VXLAN_F_IPV6 ? sizeof(struct ipv6hdr) :
				       sizeof(struct iphdr)) +
	       sizeof(struct udphdr) + sizeof(struct vxlanhdr) +
	       (flags & VXLAN_F_GPE ? 0 : ETH_HLEN);
}

static inline struct vxlanhdr *vxlan_hdr(struct sk_buff *skb)
{
	return (struct vxlanhdr *)(udp_hdr(skb) + 1);
}

static inline __be32 vxlan_vni(__be32 vni_field)
{
#if defined(__BIG_ENDIAN)
	return (__force __be32)((__force u32)vni_field >> 8);
#else
	return (__force __be32)((__force u32)(vni_field & VXLAN_VNI_MASK) << 8);
#endif
}

static inline __be32 vxlan_vni_field(__be32 vni)
{
#if defined(__BIG_ENDIAN)
	return (__force __be32)((__force u32)vni << 8);
#else
	return (__force __be32)((__force u32)vni >> 8);
#endif
}

static inline size_t vxlan_rco_start(__be32 vni_field)
{
	return be32_to_cpu(vni_field & VXLAN_RCO_MASK) << VXLAN_RCO_SHIFT;
}

static inline size_t vxlan_rco_offset(__be32 vni_field)
{
	return (vni_field & VXLAN_RCO_UDP) ?
		offsetof(struct udphdr, check) :
		offsetof(struct tcphdr, check);
}

static inline __be32 vxlan_compute_rco(unsigned int start, unsigned int offset)
{
	__be32 vni_field = cpu_to_be32(start >> VXLAN_RCO_SHIFT);

	if (offset == offsetof(struct udphdr, check))
		vni_field |= VXLAN_RCO_UDP;
	return vni_field;
}

static inline unsigned short vxlan_get_sk_family(struct vxlan_sock *vs)
{
	return vs->sock->sk->sk_family;
}

#if IS_ENABLED(CONFIG_IPV6)

static inline bool vxlan_addr_any(const union vxlan_addr *ipa)
{
	if (ipa->sa.sa_family == AF_INET6)
		return ipv6_addr_any(&ipa->sin6.sin6_addr);
	else
		return ipa->sin.sin_addr.s_addr == htonl(INADDR_ANY);
}

static inline bool vxlan_addr_multicast(const union vxlan_addr *ipa)
{
	if (ipa->sa.sa_family == AF_INET6)
		return ipv6_addr_is_multicast(&ipa->sin6.sin6_addr);
	else
		return ipv4_is_multicast(ipa->sin.sin_addr.s_addr);
}

#else /* !IS_ENABLED(CONFIG_IPV6) */

static inline bool vxlan_addr_any(const union vxlan_addr *ipa)
{
	return ipa->sin.sin_addr.s_addr == htonl(INADDR_ANY);
}

static inline bool vxlan_addr_multicast(const union vxlan_addr *ipa)
{
	return ipv4_is_multicast(ipa->sin.sin_addr.s_addr);
}

#endif /* IS_ENABLED(CONFIG_IPV6) */

static inline bool netif_is_vxlan(const struct net_device *dev)
{
	return dev->rtnl_link_ops &&
	       !strcmp(dev->rtnl_link_ops->kind, "vxlan");
}

struct switchdev_notifier_vxlan_fdb_info {
	struct switchdev_notifier_info info; /* must be first */
	union vxlan_addr remote_ip;
	__be16 remote_port;
	__be32 remote_vni;
	u32 remote_ifindex;
	u8 eth_addr[ETH_ALEN];
	__be32 vni;
	bool offloaded;
	bool added_by_user;
};

#if IS_ENABLED(CONFIG_VXLAN)
int vxlan_fdb_find_uc(struct net_device *dev, const u8 *mac, __be32 vni,
		      struct switchdev_notifier_vxlan_fdb_info *fdb_info);
int vxlan_fdb_replay(const struct net_device *dev, __be32 vni,
		     struct notifier_block *nb,
		     struct netlink_ext_ack *extack);
void vxlan_fdb_clear_offload(const struct net_device *dev, __be32 vni);

#else
static inline int
vxlan_fdb_find_uc(struct net_device *dev, const u8 *mac, __be32 vni,
		  struct switchdev_notifier_vxlan_fdb_info *fdb_info)
{
	return -ENOENT;
}

static inline int vxlan_fdb_replay(const struct net_device *dev, __be32 vni,
				   struct notifier_block *nb,
				   struct netlink_ext_ack *extack)
{
	return -EOPNOTSUPP;
}

static inline void
vxlan_fdb_clear_offload(const struct net_device *dev, __be32 vni)
{
}
#endif

static inline void vxlan_flag_attr_error(int attrtype,
					 struct netlink_ext_ack *extack)
{
#define VXLAN_FLAG(flg) \
	case IFLA_VXLAN_##flg: \
		NL_SET_ERR_MSG_MOD(extack, \
				   "cannot change " #flg " flag"); \
		break
	switch (attrtype) {
	VXLAN_FLAG(TTL_INHERIT);
	VXLAN_FLAG(LEARNING);
	VXLAN_FLAG(PROXY);
	VXLAN_FLAG(RSC);
	VXLAN_FLAG(L2MISS);
	VXLAN_FLAG(L3MISS);
	VXLAN_FLAG(COLLECT_METADATA);
	VXLAN_FLAG(UDP_ZERO_CSUM6_TX);
	VXLAN_FLAG(UDP_ZERO_CSUM6_RX);
	VXLAN_FLAG(REMCSUM_TX);
	VXLAN_FLAG(REMCSUM_RX);
	VXLAN_FLAG(GBP);
	VXLAN_FLAG(GPE);
	VXLAN_FLAG(REMCSUM_NOPARTIAL);
	default:
		NL_SET_ERR_MSG_MOD(extack, \
				   "cannot change flag");
		break;
	}
#undef VXLAN_FLAG
}

static inline bool vxlan_fdb_nh_path_select(struct nexthop *nh,
					    u32 hash,
					    struct vxlan_rdst *rdst)
{
	struct fib_nh_common *nhc;

	nhc = nexthop_path_fdb_result(nh, hash >> 1);
	if (unlikely(!nhc))
		return false;

	switch (nhc->nhc_gw_family) {
	case AF_INET:
		rdst->remote_ip.sin.sin_addr.s_addr = nhc->nhc_gw.ipv4;
		rdst->remote_ip.sa.sa_family = AF_INET;
		break;
	case AF_INET6:
		rdst->remote_ip.sin6.sin6_addr = nhc->nhc_gw.ipv6;
		rdst->remote_ip.sa.sa_family = AF_INET6;
		break;
	}

	return true;
}

static inline void vxlan_build_gbp_hdr(struct vxlanhdr *vxh, const struct vxlan_metadata *md)
{
	struct vxlanhdr_gbp *gbp;

	if (!md->gbp)
		return;

	gbp = (struct vxlanhdr_gbp *)vxh;
	vxh->vx_flags |= VXLAN_HF_GBP;

	if (md->gbp & VXLAN_GBP_DONT_LEARN)
		gbp->dont_learn = 1;

	if (md->gbp & VXLAN_GBP_POLICY_APPLIED)
		gbp->policy_applied = 1;

	gbp->policy_id = htons(md->gbp & VXLAN_GBP_ID_MASK);
}

#endif
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!