Current File : //proc/thread-self/root/usr/src/linux-headers-6.8.0-59/include/linux/libata.h
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 *  Copyright 2003-2005 Red Hat, Inc.  All rights reserved.
 *  Copyright 2003-2005 Jeff Garzik
 *
 *  libata documentation is available via 'make {ps|pdf}docs',
 *  as Documentation/driver-api/libata.rst
 */

#ifndef __LINUX_LIBATA_H__
#define __LINUX_LIBATA_H__

#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <linux/ata.h>
#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
#include <linux/acpi.h>
#include <linux/cdrom.h>
#include <linux/sched.h>
#include <linux/async.h>

/*
 * Define if arch has non-standard setup.  This is a _PCI_ standard
 * not a legacy or ISA standard.
 */
#ifdef CONFIG_ATA_NONSTANDARD
#include <asm/libata-portmap.h>
#else
#define ATA_PRIMARY_IRQ(dev)	14
#define ATA_SECONDARY_IRQ(dev)	15
#endif

/*
 * compile-time options: to be removed as soon as all the drivers are
 * converted to the new debugging mechanism
 */
#undef ATA_IRQ_TRAP		/* define to ack screaming irqs */


#define ata_print_version_once(dev, version)			\
({								\
	static bool __print_once;				\
								\
	if (!__print_once) {					\
		__print_once = true;				\
		ata_print_version(dev, version);		\
	}							\
})

/* defines only for the constants which don't work well as enums */
#define ATA_TAG_POISON		0xfafbfcfdU

enum {
	/* various global constants */
	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
	LIBATA_DUMB_MAX_PRD	= ATA_MAX_PRD / 4,	/* Worst case */
	ATA_DEF_QUEUE		= 1,
	ATA_MAX_QUEUE		= 32,
	ATA_TAG_INTERNAL	= ATA_MAX_QUEUE,
	ATA_SHORT_PAUSE		= 16,

	ATAPI_MAX_DRAIN		= 16 << 10,

	ATA_ALL_DEVICES		= (1 << ATA_MAX_DEVICES) - 1,

	ATA_SHT_EMULATED	= 1,
	ATA_SHT_THIS_ID		= -1,

	/* struct ata_taskfile flags */
	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
	ATA_TFLAG_LBA		= (1 << 4), /* enable LBA */
	ATA_TFLAG_FUA		= (1 << 5), /* enable FUA */
	ATA_TFLAG_POLLING	= (1 << 6), /* set nIEN to 1 and use polling */

	/* struct ata_device stuff */
	ATA_DFLAG_LBA		= (1 << 0), /* device supports LBA */
	ATA_DFLAG_LBA48		= (1 << 1), /* device supports LBA48 */
	ATA_DFLAG_CDB_INTR	= (1 << 2), /* device asserts INTRQ when ready for CDB */
	ATA_DFLAG_NCQ		= (1 << 3), /* device supports NCQ */
	ATA_DFLAG_FLUSH_EXT	= (1 << 4), /* do FLUSH_EXT instead of FLUSH */
	ATA_DFLAG_ACPI_PENDING	= (1 << 5), /* ACPI resume action pending */
	ATA_DFLAG_ACPI_FAILED	= (1 << 6), /* ACPI on devcfg has failed */
	ATA_DFLAG_AN		= (1 << 7), /* AN configured */
	ATA_DFLAG_TRUSTED	= (1 << 8), /* device supports trusted send/recv */
	ATA_DFLAG_FUA		= (1 << 9), /* device supports FUA */
	ATA_DFLAG_DMADIR	= (1 << 10), /* device requires DMADIR */
	ATA_DFLAG_NCQ_SEND_RECV = (1 << 11), /* device supports NCQ SEND and RECV */
	ATA_DFLAG_NCQ_PRIO	= (1 << 12), /* device supports NCQ priority */
	ATA_DFLAG_CDL		= (1 << 13), /* supports cmd duration limits */
	ATA_DFLAG_CFG_MASK	= (1 << 14) - 1,

	ATA_DFLAG_PIO		= (1 << 14), /* device limited to PIO mode */
	ATA_DFLAG_NCQ_OFF	= (1 << 15), /* device limited to non-NCQ mode */
	ATA_DFLAG_SLEEPING	= (1 << 16), /* device is sleeping */
	ATA_DFLAG_DUBIOUS_XFER	= (1 << 17), /* data transfer not verified */
	ATA_DFLAG_NO_UNLOAD	= (1 << 18), /* device doesn't support unload */
	ATA_DFLAG_UNLOCK_HPA	= (1 << 19), /* unlock HPA */
	ATA_DFLAG_INIT_MASK	= (1 << 20) - 1,

	ATA_DFLAG_NCQ_PRIO_ENABLED = (1 << 20), /* Priority cmds sent to dev */
	ATA_DFLAG_CDL_ENABLED	= (1 << 21), /* cmd duration limits is enabled */
	ATA_DFLAG_RESUMING	= (1 << 22),  /* Device is resuming */
	ATA_DFLAG_DETACH	= (1 << 24),
	ATA_DFLAG_DETACHED	= (1 << 25),
	ATA_DFLAG_DA		= (1 << 26), /* device supports Device Attention */
	ATA_DFLAG_DEVSLP	= (1 << 27), /* device supports Device Sleep */
	ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */
	ATA_DFLAG_D_SENSE	= (1 << 29), /* Descriptor sense requested */
	ATA_DFLAG_ZAC		= (1 << 30), /* ZAC device */

	ATA_DFLAG_FEATURES_MASK	= (ATA_DFLAG_TRUSTED | ATA_DFLAG_DA |	\
				   ATA_DFLAG_DEVSLP | ATA_DFLAG_NCQ_SEND_RECV | \
				   ATA_DFLAG_NCQ_PRIO | ATA_DFLAG_FUA | \
				   ATA_DFLAG_CDL),

	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
	ATA_DEV_ATA		= 1,	/* ATA device */
	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
	ATA_DEV_ATAPI		= 3,	/* ATAPI device */
	ATA_DEV_ATAPI_UNSUP	= 4,	/* ATAPI device (unsupported) */
	ATA_DEV_PMP		= 5,	/* SATA port multiplier */
	ATA_DEV_PMP_UNSUP	= 6,	/* SATA port multiplier (unsupported) */
	ATA_DEV_SEMB		= 7,	/* SEMB */
	ATA_DEV_SEMB_UNSUP	= 8,	/* SEMB (unsupported) */
	ATA_DEV_ZAC		= 9,	/* ZAC device */
	ATA_DEV_ZAC_UNSUP	= 10,	/* ZAC device (unsupported) */
	ATA_DEV_NONE		= 11,	/* no device */

	/* struct ata_link flags */
	/* NOTE: struct ata_force_param currently stores lflags in u16 */
	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
	ATA_LFLAG_ASSUME_CLASS	= ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
	ATA_LFLAG_NO_RETRY	= (1 << 5), /* don't retry this link */
	ATA_LFLAG_DISABLED	= (1 << 6), /* link is disabled */
	ATA_LFLAG_SW_ACTIVITY	= (1 << 7), /* keep activity stats */
	ATA_LFLAG_NO_LPM	= (1 << 8), /* disable LPM on this link */
	ATA_LFLAG_RST_ONCE	= (1 << 9), /* limit recovery to one reset */
	ATA_LFLAG_CHANGED	= (1 << 10), /* LPM state changed on this link */
	ATA_LFLAG_NO_DEBOUNCE_DELAY = (1 << 11), /* no debounce delay on link resume */

	/* struct ata_port flags */
	ATA_FLAG_SLAVE_POSS	= (1 << 0), /* host supports slave dev */
					    /* (doesn't imply presence) */
	ATA_FLAG_SATA		= (1 << 1),
	ATA_FLAG_NO_LPM		= (1 << 2), /* host not happy with LPM */
	ATA_FLAG_NO_LOG_PAGE	= (1 << 5), /* do not issue log page read */
	ATA_FLAG_NO_ATAPI	= (1 << 6), /* No ATAPI support */
	ATA_FLAG_PIO_DMA	= (1 << 7), /* PIO cmds via DMA */
	ATA_FLAG_PIO_LBA48	= (1 << 8), /* Host DMA engine is LBA28 only */
	ATA_FLAG_PIO_POLLING	= (1 << 9), /* use polling PIO if LLD
					     * doesn't handle PIO interrupts */
	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */
	ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
	ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
	ATA_FLAG_DEBUGMSG	= (1 << 13),
	ATA_FLAG_FPDMA_AA		= (1 << 14), /* driver supports Auto-Activate */
	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
	ATA_FLAG_ACPI_SATA	= (1 << 17), /* need native SATA ACPI layout */
	ATA_FLAG_AN		= (1 << 18), /* controller supports AN */
	ATA_FLAG_PMP		= (1 << 19), /* controller supports PMP */
	ATA_FLAG_FPDMA_AUX	= (1 << 20), /* controller supports H2DFIS aux field */
	ATA_FLAG_EM		= (1 << 21), /* driver supports enclosure
					      * management */
	ATA_FLAG_SW_ACTIVITY	= (1 << 22), /* driver supports sw activity
					      * led */
	ATA_FLAG_NO_DIPM	= (1 << 23), /* host not happy with DIPM */
	ATA_FLAG_SAS_HOST	= (1 << 24), /* SAS host */

	/* bits 24:31 of ap->flags are reserved for LLD specific flags */


	/* struct ata_port pflags */
	ATA_PFLAG_EH_PENDING	= (1 << 0), /* EH pending */
	ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
	ATA_PFLAG_FROZEN	= (1 << 2), /* port is frozen */
	ATA_PFLAG_RECOVERED	= (1 << 3), /* recovery action performed */
	ATA_PFLAG_LOADING	= (1 << 4), /* boot/loading probe */
	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
	ATA_PFLAG_RESETTING	= (1 << 8), /* reset in progress */
	ATA_PFLAG_UNLOADING	= (1 << 9), /* driver is being unloaded */
	ATA_PFLAG_UNLOADED	= (1 << 10), /* driver is unloaded */

	ATA_PFLAG_RESUMING	= (1 << 16),  /* port is being resumed */
	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */

	ATA_PFLAG_PIO32		= (1 << 20),  /* 32bit PIO */
	ATA_PFLAG_PIO32CHANGE	= (1 << 21),  /* 32bit PIO can be turned on/off */
	ATA_PFLAG_EXTERNAL	= (1 << 22),  /* eSATA/external port */

	/* struct ata_queued_cmd flags */
	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
	ATA_QCFLAG_DMAMAP	= (1 << 1), /* SG table is DMA mapped */
	ATA_QCFLAG_RTF_FILLED	= (1 << 2), /* result TF has been filled */
	ATA_QCFLAG_IO		= (1 << 3), /* standard IO command */
	ATA_QCFLAG_RESULT_TF	= (1 << 4), /* result TF requested */
	ATA_QCFLAG_CLEAR_EXCL	= (1 << 5), /* clear excl_link on completion */
	ATA_QCFLAG_QUIET	= (1 << 6), /* don't report device error */
	ATA_QCFLAG_RETRY	= (1 << 7), /* retry after failure */
	ATA_QCFLAG_HAS_CDL	= (1 << 8), /* qc has CDL a descriptor set */

	ATA_QCFLAG_EH		= (1 << 16), /* cmd aborted and owned by EH */
	ATA_QCFLAG_SENSE_VALID	= (1 << 17), /* sense data valid */
	ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */
	ATA_QCFLAG_EH_SUCCESS_CMD = (1 << 19), /* EH should fetch sense for this successful cmd */

	/* host set flags */
	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */

	ATA_HOST_NO_PART	= (1 << 4), /* Host does not support partial */
	ATA_HOST_NO_SSC		= (1 << 5), /* Host does not support slumber */
	ATA_HOST_NO_DEVSLP	= (1 << 6), /* Host does not support devslp */

	/* bits 24:31 of host->flags are reserved for LLD specific flags */

	/* various lengths of time */
	ATA_TMOUT_BOOT		= 30000,	/* heuristic */
	ATA_TMOUT_BOOT_QUICK	=  7000,	/* heuristic */
	ATA_TMOUT_INTERNAL_QUICK = 5000,
	ATA_TMOUT_MAX_PARK	= 30000,

	/*
	 * GoVault needs 2s and iVDR disk HHD424020F7SV00 800ms.  2s
	 * is too much without parallel probing.  Use 2s if parallel
	 * probing is available, 800ms otherwise.
	 */
	ATA_TMOUT_FF_WAIT_LONG	=  2000,
	ATA_TMOUT_FF_WAIT	=   800,

	/* Spec mandates to wait for ">= 2ms" before checking status
	 * after reset.  We wait 150ms, because that was the magic
	 * delay used for ATAPI devices in Hale Landis's ATADRVR, for
	 * the period of time between when the ATA command register is
	 * written, and then status is checked.  Because waiting for
	 * "a while" before checking status is fine, post SRST, we
	 * perform this magic delay here as well.
	 *
	 * Old drivers/ide uses the 2mS rule and then waits for ready.
	 */
	ATA_WAIT_AFTER_RESET	=  150,

	/* If PMP is supported, we have to do follow-up SRST.  As some
	 * PMPs don't send D2H Reg FIS after hardreset, LLDs are
	 * advised to wait only for the following duration before
	 * doing SRST.
	 */
	ATA_TMOUT_PMP_SRST_WAIT	= 10000,

	/* When the LPM policy is set to ATA_LPM_MAX_POWER, there might
	 * be a spurious PHY event, so ignore the first PHY event that
	 * occurs within 10s after the policy change.
	 */
	ATA_TMOUT_SPURIOUS_PHY	= 10000,

	/* ATA bus states */
	BUS_UNKNOWN		= 0,
	BUS_DMA			= 1,
	BUS_IDLE		= 2,
	BUS_NOINTR		= 3,
	BUS_NODATA		= 4,
	BUS_TIMER		= 5,
	BUS_PIO			= 6,
	BUS_EDD			= 7,
	BUS_IDENTIFY		= 8,
	BUS_PACKET		= 9,

	/* SATA port states */
	PORT_UNKNOWN		= 0,
	PORT_ENABLED		= 1,
	PORT_DISABLED		= 2,

	/* encoding various smaller bitmaps into a single
	 * unsigned int bitmap
	 */
	ATA_NR_PIO_MODES	= 7,
	ATA_NR_MWDMA_MODES	= 5,
	ATA_NR_UDMA_MODES	= 8,

	ATA_SHIFT_PIO		= 0,
	ATA_SHIFT_MWDMA		= ATA_SHIFT_PIO + ATA_NR_PIO_MODES,
	ATA_SHIFT_UDMA		= ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES,
	ATA_SHIFT_PRIO		= 6,

	ATA_PRIO_HIGH		= 2,
	/* size of buffer to pad xfers ending on unaligned boundaries */
	ATA_DMA_PAD_SZ		= 4,

	/* ering size */
	ATA_ERING_SIZE		= 32,

	/* return values for ->qc_defer */
	ATA_DEFER_LINK		= 1,
	ATA_DEFER_PORT		= 2,

	/* desc_len for ata_eh_info and context */
	ATA_EH_DESC_LEN		= 80,

	/* reset / recovery action types */
	ATA_EH_REVALIDATE	= (1 << 0),
	ATA_EH_SOFTRESET	= (1 << 1), /* meaningful only in ->prereset */
	ATA_EH_HARDRESET	= (1 << 2), /* meaningful only in ->prereset */
	ATA_EH_RESET		= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
	ATA_EH_ENABLE_LINK	= (1 << 3),
	ATA_EH_PARK		= (1 << 5), /* unload heads and stop I/O */
	ATA_EH_GET_SUCCESS_SENSE = (1 << 6), /* Get sense data for successful cmd */
	ATA_EH_SET_ACTIVE	= (1 << 7), /* Set a device to active power mode */

	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_PARK |
				  ATA_EH_GET_SUCCESS_SENSE | ATA_EH_SET_ACTIVE,
	ATA_EH_ALL_ACTIONS	= ATA_EH_REVALIDATE | ATA_EH_RESET |
				  ATA_EH_ENABLE_LINK,

	/* ata_eh_info->flags */
	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
	ATA_EHI_NO_RECOVERY	= (1 << 4),  /* no recovery */

	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */
	ATA_EHI_PRINTINFO	= (1 << 18), /* print configuration info */
	ATA_EHI_SETMODE		= (1 << 19), /* configure transfer mode */
	ATA_EHI_POST_SETMODE	= (1 << 20), /* revalidating after setmode */

	ATA_EHI_DID_RESET	= ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,

	/* mask of flags to transfer *to* the slave link */
	ATA_EHI_TO_SLAVE_MASK	= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,

	/* max tries if error condition is still set after ->error_handler */
	ATA_EH_MAX_TRIES	= 5,

	/* sometimes resuming a link requires several retries */
	ATA_LINK_RESUME_TRIES	= 5,

	/* how hard are we gonna try to probe/recover devices */
	ATA_EH_DEV_TRIES	= 3,
	ATA_EH_PMP_TRIES	= 5,
	ATA_EH_PMP_LINK_TRIES	= 3,

	SATA_PMP_RW_TIMEOUT	= 3000,		/* PMP read/write timeout */

	/* This should match the actual table size of
	 * ata_eh_cmd_timeout_table in libata-eh.c.
	 */
	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8,

	/* Horkage types. May be set by libata or controller on drives
	   (some horkage may be drive/controller pair dependent */

	ATA_HORKAGE_DIAGNOSTIC	= (1 << 0),	/* Failed boot diag */
	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
	ATA_HORKAGE_BROKEN_HPA	= (1 << 4),	/* Broken HPA */
	ATA_HORKAGE_DISABLE	= (1 << 5),	/* Disable it */
	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
	ATA_HORKAGE_STUCK_ERR	= (1 << 9),	/* stuck ERR on next PACKET */
	ATA_HORKAGE_BRIDGE_OK	= (1 << 10),	/* no bridge limits */
	ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
						    not multiple of 16 bytes */
	ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),	/* firmware update warning */
	ATA_HORKAGE_1_5_GBPS	= (1 << 13),	/* force 1.5 Gbps */
	ATA_HORKAGE_NOSETXFER	= (1 << 14),	/* skip SETXFER, SATA only */
	ATA_HORKAGE_BROKEN_FPDMA_AA	= (1 << 15),	/* skip AA */
	ATA_HORKAGE_DUMP_ID	= (1 << 16),	/* dump IDENTIFY data */
	ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17),	/* Set max sects to 65535 */
	ATA_HORKAGE_ATAPI_DMADIR = (1 << 18),	/* device requires dmadir */
	ATA_HORKAGE_NO_NCQ_TRIM	= (1 << 19),	/* don't use queued TRIM */
	ATA_HORKAGE_NOLPM	= (1 << 20),	/* don't use LPM */
	ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21),	/* some WDs have broken LPM */
	ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
	ATA_HORKAGE_NO_DMA_LOG	= (1 << 23),	/* don't use DMA for log read */
	ATA_HORKAGE_NOTRIM	= (1 << 24),	/* don't use TRIM */
	ATA_HORKAGE_MAX_SEC_1024 = (1 << 25),	/* Limit max sects to 1024 */
	ATA_HORKAGE_MAX_TRIM_128M = (1 << 26),	/* Limit max trim size to 128M */
	ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27),	/* Disable NCQ on ATI chipset */
	ATA_HORKAGE_NO_ID_DEV_LOG = (1 << 28),	/* Identify device log missing */
	ATA_HORKAGE_NO_LOG_DIR	= (1 << 29),	/* Do not read log directory */
	ATA_HORKAGE_NO_FUA	= (1 << 30),	/* Do not use FUA */

	 /* DMA mask for user DMA control: User visible values; DO NOT
	    renumber */
	ATA_DMA_MASK_ATA	= (1 << 0),	/* DMA on ATA Disk */
	ATA_DMA_MASK_ATAPI	= (1 << 1),	/* DMA on ATAPI */
	ATA_DMA_MASK_CFA	= (1 << 2),	/* DMA on CF Card */

	/* ATAPI command types */
	ATAPI_READ		= 0,		/* READs */
	ATAPI_WRITE		= 1,		/* WRITEs */
	ATAPI_READ_CD		= 2,		/* READ CD [MSF] */
	ATAPI_PASS_THRU		= 3,		/* SAT pass-thru */
	ATAPI_MISC		= 4,		/* the rest */

	/* Timing constants */
	ATA_TIMING_SETUP	= (1 << 0),
	ATA_TIMING_ACT8B	= (1 << 1),
	ATA_TIMING_REC8B	= (1 << 2),
	ATA_TIMING_CYC8B	= (1 << 3),
	ATA_TIMING_8BIT		= ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
				  ATA_TIMING_CYC8B,
	ATA_TIMING_ACTIVE	= (1 << 4),
	ATA_TIMING_RECOVER	= (1 << 5),
	ATA_TIMING_DMACK_HOLD	= (1 << 6),
	ATA_TIMING_CYCLE	= (1 << 7),
	ATA_TIMING_UDMA		= (1 << 8),
	ATA_TIMING_ALL		= ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
				  ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
				  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
				  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
				  ATA_TIMING_UDMA,

	/* ACPI constants */
	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
	ATA_ACPI_FILTER_LOCK	= 1 << 1,
	ATA_ACPI_FILTER_DIPM	= 1 << 2,
	ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3,	/* FPDMA non-zero offset */
	ATA_ACPI_FILTER_FPDMA_AA = 1 << 4,	/* FPDMA auto activate */

	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
				  ATA_ACPI_FILTER_LOCK |
				  ATA_ACPI_FILTER_DIPM,
};

enum ata_xfer_mask {
	ATA_MASK_PIO		= ((1U << ATA_NR_PIO_MODES) - 1) << ATA_SHIFT_PIO,
	ATA_MASK_MWDMA		= ((1U << ATA_NR_MWDMA_MODES) - 1) << ATA_SHIFT_MWDMA,
	ATA_MASK_UDMA		= ((1U << ATA_NR_UDMA_MODES) - 1) << ATA_SHIFT_UDMA,
};

enum hsm_task_states {
	HSM_ST_IDLE,		/* no command on going */
	HSM_ST_FIRST,		/* (waiting the device to)
				   write CDB or first data block */
	HSM_ST,			/* (waiting the device to) transfer data */
	HSM_ST_LAST,		/* (waiting the device to) complete command */
	HSM_ST_ERR,		/* error */
};

enum ata_completion_errors {
	AC_ERR_OK		= 0,	    /* no error */
	AC_ERR_DEV		= (1 << 0), /* device reported error */
	AC_ERR_HSM		= (1 << 1), /* host state machine violation */
	AC_ERR_TIMEOUT		= (1 << 2), /* timeout */
	AC_ERR_MEDIA		= (1 << 3), /* media error */
	AC_ERR_ATA_BUS		= (1 << 4), /* ATA bus error */
	AC_ERR_HOST_BUS		= (1 << 5), /* host bus error */
	AC_ERR_SYSTEM		= (1 << 6), /* system error */
	AC_ERR_INVALID		= (1 << 7), /* invalid argument */
	AC_ERR_OTHER		= (1 << 8), /* unknown */
	AC_ERR_NODEV_HINT	= (1 << 9), /* polling device detection hint */
	AC_ERR_NCQ		= (1 << 10), /* marker for offending NCQ qc */
};

/*
 * Link power management policy: If you alter this, you also need to
 * alter libata-sata.c (for the ascii descriptions)
 */
enum ata_lpm_policy {
	ATA_LPM_UNKNOWN,
	ATA_LPM_MAX_POWER,
	ATA_LPM_MED_POWER,
	ATA_LPM_MED_POWER_WITH_DIPM, /* Med power + DIPM as win IRST does */
	ATA_LPM_MIN_POWER_WITH_PARTIAL, /* Min Power + partial and slumber */
	ATA_LPM_MIN_POWER, /* Min power + no partial (slumber only) */
};

enum ata_lpm_hints {
	ATA_LPM_EMPTY		= (1 << 0), /* port empty/probing */
	ATA_LPM_HIPM		= (1 << 1), /* may use HIPM */
	ATA_LPM_WAKE_ONLY	= (1 << 2), /* only wake up link */
};

/* forward declarations */
struct scsi_device;
struct ata_port_operations;
struct ata_port;
struct ata_link;
struct ata_queued_cmd;

/* typedefs */
typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
typedef int (*ata_prereset_fn_t)(struct ata_link *link, unsigned long deadline);
typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
			      unsigned long deadline);
typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);

extern struct device_attribute dev_attr_unload_heads;
#ifdef CONFIG_SATA_HOST
extern struct device_attribute dev_attr_link_power_management_policy;
extern struct device_attribute dev_attr_ncq_prio_supported;
extern struct device_attribute dev_attr_ncq_prio_enable;
extern struct device_attribute dev_attr_em_message_type;
extern struct device_attribute dev_attr_em_message;
extern struct device_attribute dev_attr_sw_activity;
#endif

enum sw_activity {
	OFF,
	BLINK_ON,
	BLINK_OFF,
};

struct ata_taskfile {
	unsigned long		flags;		/* ATA_TFLAG_xxx */
	u8			protocol;	/* ATA_PROT_xxx */

	u8			ctl;		/* control reg */

	u8			hob_feature;	/* additional data */
	u8			hob_nsect;	/* to support LBA48 */
	u8			hob_lbal;
	u8			hob_lbam;
	u8			hob_lbah;

	union {
		u8		error;
		u8		feature;
	};
	u8			nsect;
	u8			lbal;
	u8			lbam;
	u8			lbah;

	u8			device;

	union {
		u8		status;
		u8		command;
	};

	u32			auxiliary;	/* auxiliary field */
						/* from SATA 3.1 and */
						/* ATA-8 ACS-3 */
};

#ifdef CONFIG_ATA_SFF
struct ata_ioports {
	void __iomem		*cmd_addr;
	void __iomem		*data_addr;
	void __iomem		*error_addr;
	void __iomem		*feature_addr;
	void __iomem		*nsect_addr;
	void __iomem		*lbal_addr;
	void __iomem		*lbam_addr;
	void __iomem		*lbah_addr;
	void __iomem		*device_addr;
	void __iomem		*status_addr;
	void __iomem		*command_addr;
	void __iomem		*altstatus_addr;
	void __iomem		*ctl_addr;
#ifdef CONFIG_ATA_BMDMA
	void __iomem		*bmdma_addr;
#endif /* CONFIG_ATA_BMDMA */
	void __iomem		*scr_addr;
};
#endif /* CONFIG_ATA_SFF */

struct ata_host {
	spinlock_t		lock;
	struct device 		*dev;
	void __iomem * const	*iomap;
	unsigned int		n_ports;
	unsigned int		n_tags;			/* nr of NCQ tags */
	void			*private_data;
	struct ata_port_operations *ops;
	unsigned long		flags;
	struct kref		kref;

	struct mutex		eh_mutex;
	struct task_struct	*eh_owner;

	struct ata_port		*simplex_claimed;	/* channel owning the DMA */
	struct ata_port		*ports[];
};

struct ata_queued_cmd {
	struct ata_port		*ap;
	struct ata_device	*dev;

	struct scsi_cmnd	*scsicmd;
	void			(*scsidone)(struct scsi_cmnd *);

	struct ata_taskfile	tf;
	u8			cdb[ATAPI_CDB_LEN];

	unsigned long		flags;		/* ATA_QCFLAG_xxx */
	unsigned int		tag;		/* libata core tag */
	unsigned int		hw_tag;		/* driver tag */
	unsigned int		n_elem;
	unsigned int		orig_n_elem;

	int			dma_dir;

	unsigned int		sect_size;

	unsigned int		nbytes;
	unsigned int		extrabytes;
	unsigned int		curbytes;

	struct scatterlist	sgent;

	struct scatterlist	*sg;

	struct scatterlist	*cursg;
	unsigned int		cursg_ofs;

	unsigned int		err_mask;
	struct ata_taskfile	result_tf;
	ata_qc_cb_t		complete_fn;

	void			*private_data;
	void			*lldd_task;
};

struct ata_port_stats {
	unsigned long		unhandled_irq;
	unsigned long		idle_irq;
	unsigned long		rw_reqbuf;
};

struct ata_ering_entry {
	unsigned int		eflags;
	unsigned int		err_mask;
	u64			timestamp;
};

struct ata_ering {
	int			cursor;
	struct ata_ering_entry	ring[ATA_ERING_SIZE];
};

struct ata_cpr {
	u8			num;
	u8			num_storage_elements;
	u64			start_lba;
	u64			num_lbas;
};

struct ata_cpr_log {
	u8			nr_cpr;
	struct ata_cpr		cpr[] __counted_by(nr_cpr);
};

struct ata_device {
	struct ata_link		*link;
	unsigned int		devno;		/* 0 or 1 */
	unsigned int		horkage;	/* List of broken features */
	unsigned long		flags;		/* ATA_DFLAG_xxx */
	struct scsi_device	*sdev;		/* attached SCSI device */
	void			*private_data;
#ifdef CONFIG_ATA_ACPI
	union acpi_object	*gtf_cache;
	unsigned int		gtf_filter;
#endif
#ifdef CONFIG_SATA_ZPODD
	void			*zpodd;
#endif
	struct device		tdev;
	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
	u64			n_sectors;	/* size of device, if ATA */
	u64			n_native_sectors; /* native size, if ATA */
	unsigned int		class;		/* ATA_DEV_xxx */
	unsigned long		unpark_deadline;

	u8			pio_mode;
	u8			dma_mode;
	u8			xfer_mode;
	unsigned int		xfer_shift;	/* ATA_SHIFT_xxx */

	unsigned int		multi_count;	/* sectors count for
						   READ/WRITE MULTIPLE */
	unsigned int		max_sectors;	/* per-device max sectors */
	unsigned int		cdb_len;

	/* per-dev xfer mask */
	unsigned int		pio_mask;
	unsigned int		mwdma_mask;
	unsigned int		udma_mask;

	/* for CHS addressing */
	u16			cylinders;	/* Number of cylinders */
	u16			heads;		/* Number of heads */
	u16			sectors;	/* Number of sectors per track */

	union {
		u16		id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
		u32		gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
	} ____cacheline_aligned;

	/* DEVSLP Timing Variables from Identify Device Data Log */
	u8			devslp_timing[ATA_LOG_DEVSLP_SIZE];

	/* NCQ send and receive log subcommand support */
	u8			ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_SIZE];
	u8			ncq_non_data_cmds[ATA_LOG_NCQ_NON_DATA_SIZE];

	/* ZAC zone configuration */
	u32			zac_zoned_cap;
	u32			zac_zones_optimal_open;
	u32			zac_zones_optimal_nonseq;
	u32			zac_zones_max_open;

	/* Concurrent positioning ranges */
	struct ata_cpr_log	*cpr_log;

	/* Command Duration Limits log support */
	u8			cdl[ATA_LOG_CDL_SIZE];

	/* error history */
	int			spdn_cnt;
	/* ering is CLEAR_END, read comment above CLEAR_END */
	struct ata_ering	ering;
};

/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
 * cleared to zero on ata_dev_init().
 */
#define ATA_DEVICE_CLEAR_BEGIN		offsetof(struct ata_device, n_sectors)
#define ATA_DEVICE_CLEAR_END		offsetof(struct ata_device, ering)

struct ata_eh_info {
	struct ata_device	*dev;		/* offending device */
	u32			serror;		/* SError from LLDD */
	unsigned int		err_mask;	/* port-wide err_mask */
	unsigned int		action;		/* ATA_EH_* action mask */
	unsigned int		dev_action[ATA_MAX_DEVICES]; /* dev EH action */
	unsigned int		flags;		/* ATA_EHI_* flags */

	unsigned int		probe_mask;

	char			desc[ATA_EH_DESC_LEN];
	int			desc_len;
};

struct ata_eh_context {
	struct ata_eh_info	i;
	int			tries[ATA_MAX_DEVICES];
	int			cmd_timeout_idx[ATA_MAX_DEVICES]
					       [ATA_EH_CMD_TIMEOUT_TABLE_SIZE];
	unsigned int		classes[ATA_MAX_DEVICES];
	unsigned int		did_probe_mask;
	unsigned int		unloaded_mask;
	unsigned int		saved_ncq_enabled;
	u8			saved_xfer_mode[ATA_MAX_DEVICES];
	/* timestamp for the last reset attempt or success */
	unsigned long		last_reset;
};

struct ata_acpi_drive
{
	u32 pio;
	u32 dma;
} __packed;

struct ata_acpi_gtm {
	struct ata_acpi_drive drive[2];
	u32 flags;
} __packed;

struct ata_link {
	struct ata_port		*ap;
	int			pmp;		/* port multiplier port # */

	struct device		tdev;
	unsigned int		active_tag;	/* active tag on this link */
	u32			sactive;	/* active NCQ commands */

	unsigned int		flags;		/* ATA_LFLAG_xxx */

	u32			saved_scontrol;	/* SControl on probe */
	unsigned int		hw_sata_spd_limit;
	unsigned int		sata_spd_limit;
	unsigned int		sata_spd;	/* current SATA PHY speed */
	enum ata_lpm_policy	lpm_policy;

	/* record runtime error info, protected by host_set lock */
	struct ata_eh_info	eh_info;
	/* EH context */
	struct ata_eh_context	eh_context;

	struct ata_device	device[ATA_MAX_DEVICES];

	unsigned long		last_lpm_change; /* when last LPM change happened */
};
#define ATA_LINK_CLEAR_BEGIN		offsetof(struct ata_link, active_tag)
#define ATA_LINK_CLEAR_END		offsetof(struct ata_link, device[0])

struct ata_port {
	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
	struct ata_port_operations *ops;
	spinlock_t		*lock;
	/* Flags owned by the EH context. Only EH should touch these once the
	   port is active */
	unsigned long		flags;	/* ATA_FLAG_xxx */
	/* Flags that change dynamically, protected by ap->lock */
	unsigned int		pflags; /* ATA_PFLAG_xxx */
	unsigned int		print_id; /* user visible unique port ID */
	unsigned int            local_port_no; /* host local port num */
	unsigned int		port_no; /* 0 based port no. inside the host */

#ifdef CONFIG_ATA_SFF
	struct ata_ioports	ioaddr;	/* ATA cmd/ctl/dma register blocks */
	u8			ctl;	/* cache of ATA control register */
	u8			last_ctl;	/* Cache last written value */
	struct ata_link*	sff_pio_task_link; /* link currently used */
	struct delayed_work	sff_pio_task;
#ifdef CONFIG_ATA_BMDMA
	struct ata_bmdma_prd	*bmdma_prd;	/* BMDMA SG list */
	dma_addr_t		bmdma_prd_dma;	/* and its DMA mapping */
#endif /* CONFIG_ATA_BMDMA */
#endif /* CONFIG_ATA_SFF */

	unsigned int		pio_mask;
	unsigned int		mwdma_mask;
	unsigned int		udma_mask;
	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */

	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE + 1];
	u64			qc_active;
	int			nr_active_links; /* #links with active qcs */

	struct ata_link		link;		/* host default link */
	struct ata_link		*slave_link;	/* see ata_slave_link_init() */

	int			nr_pmp_links;	/* nr of available PMP links */
	struct ata_link		*pmp_link;	/* array of PMP links */
	struct ata_link		*excl_link;	/* for PMP qc exclusion */

	struct ata_port_stats	stats;
	struct ata_host		*host;
	struct device 		*dev;
	struct device		tdev;

	struct mutex		scsi_scan_mutex;
	struct delayed_work	hotplug_task;
	struct delayed_work	scsi_rescan_task;

	unsigned int		hsm_task_state;

	struct list_head	eh_done_q;
	wait_queue_head_t	eh_wait_q;
	int			eh_tries;
	struct completion	park_req_pending;

	pm_message_t		pm_mesg;
	enum ata_lpm_policy	target_lpm_policy;

	struct timer_list	fastdrain_timer;
	unsigned int		fastdrain_cnt;

	async_cookie_t		cookie;

	int			em_message_type;
	void			*private_data;

#ifdef CONFIG_ATA_ACPI
	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
	/* owned by EH */
	u8			*ncq_sense_buf;
	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
};

/* The following initializer overrides a method to NULL whether one of
 * its parent has the method defined or not.  This is equivalent to
 * ERR_PTR(-ENOENT).  Unfortunately, ERR_PTR doesn't render a constant
 * expression and thus can't be used as an initializer.
 */
#define ATA_OP_NULL		(void *)(unsigned long)(-ENOENT)

struct ata_port_operations {
	/*
	 * Command execution
	 */
	int (*qc_defer)(struct ata_queued_cmd *qc);
	int (*check_atapi_dma)(struct ata_queued_cmd *qc);
	enum ata_completion_errors (*qc_prep)(struct ata_queued_cmd *qc);
	unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
	void (*qc_fill_rtf)(struct ata_queued_cmd *qc);
	void (*qc_ncq_fill_rtf)(struct ata_port *ap, u64 done_mask);

	/*
	 * Configuration and exception handling
	 */
	int  (*cable_detect)(struct ata_port *ap);
	unsigned int (*mode_filter)(struct ata_device *dev, unsigned int xfer_mask);
	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf,
				__le16 *id);

	void (*dev_config)(struct ata_device *dev);

	void (*freeze)(struct ata_port *ap);
	void (*thaw)(struct ata_port *ap);
	ata_prereset_fn_t	prereset;
	ata_reset_fn_t		softreset;
	ata_reset_fn_t		hardreset;
	ata_postreset_fn_t	postreset;
	ata_prereset_fn_t	pmp_prereset;
	ata_reset_fn_t		pmp_softreset;
	ata_reset_fn_t		pmp_hardreset;
	ata_postreset_fn_t	pmp_postreset;
	void (*error_handler)(struct ata_port *ap);
	void (*lost_interrupt)(struct ata_port *ap);
	void (*post_internal_cmd)(struct ata_queued_cmd *qc);
	void (*sched_eh)(struct ata_port *ap);
	void (*end_eh)(struct ata_port *ap);

	/*
	 * Optional features
	 */
	int  (*scr_read)(struct ata_link *link, unsigned int sc_reg, u32 *val);
	int  (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
	void (*pmp_attach)(struct ata_port *ap);
	void (*pmp_detach)(struct ata_port *ap);
	int  (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy,
			unsigned hints);

	/*
	 * Start, stop, suspend and resume
	 */
	int  (*port_suspend)(struct ata_port *ap, pm_message_t mesg);
	int  (*port_resume)(struct ata_port *ap);
	int  (*port_start)(struct ata_port *ap);
	void (*port_stop)(struct ata_port *ap);
	void (*host_stop)(struct ata_host *host);

#ifdef CONFIG_ATA_SFF
	/*
	 * SFF / taskfile oriented ops
	 */
	void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
	void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
	u8   (*sff_check_status)(struct ata_port *ap);
	u8   (*sff_check_altstatus)(struct ata_port *ap);
	void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
	void (*sff_tf_read)(struct ata_port *ap, struct ata_taskfile *tf);
	void (*sff_exec_command)(struct ata_port *ap,
				 const struct ata_taskfile *tf);
	unsigned int (*sff_data_xfer)(struct ata_queued_cmd *qc,
			unsigned char *buf, unsigned int buflen, int rw);
	void (*sff_irq_on)(struct ata_port *);
	bool (*sff_irq_check)(struct ata_port *);
	void (*sff_irq_clear)(struct ata_port *);
	void (*sff_drain_fifo)(struct ata_queued_cmd *qc);

#ifdef CONFIG_ATA_BMDMA
	void (*bmdma_setup)(struct ata_queued_cmd *qc);
	void (*bmdma_start)(struct ata_queued_cmd *qc);
	void (*bmdma_stop)(struct ata_queued_cmd *qc);
	u8   (*bmdma_status)(struct ata_port *ap);
#endif /* CONFIG_ATA_BMDMA */
#endif /* CONFIG_ATA_SFF */

	ssize_t (*em_show)(struct ata_port *ap, char *buf);
	ssize_t (*em_store)(struct ata_port *ap, const char *message,
			    size_t size);
	ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf);
	ssize_t (*sw_activity_store)(struct ata_device *dev,
				     enum sw_activity val);
	ssize_t (*transmit_led_message)(struct ata_port *ap, u32 state,
					ssize_t size);

	/*
	 * ->inherits must be the last field and all the preceding
	 * fields must be pointers.
	 */
	const struct ata_port_operations	*inherits;
};

struct ata_port_info {
	unsigned long		flags;
	unsigned long		link_flags;
	unsigned int		pio_mask;
	unsigned int		mwdma_mask;
	unsigned int		udma_mask;
	struct ata_port_operations *port_ops;
	void 			*private_data;
};

struct ata_timing {
	unsigned short mode;		/* ATA mode */
	unsigned short setup;		/* t1 */
	unsigned short act8b;		/* t2 for 8-bit I/O */
	unsigned short rec8b;		/* t2i for 8-bit I/O */
	unsigned short cyc8b;		/* t0 for 8-bit I/O */
	unsigned short active;		/* t2 or tD */
	unsigned short recover;		/* t2i or tK */
	unsigned short dmack_hold;	/* tj */
	unsigned short cycle;		/* t0 */
	unsigned short udma;		/* t2CYCTYP/2 */
};

/*
 * Core layer - drivers/ata/libata-core.c
 */
extern struct ata_port_operations ata_dummy_port_ops;
extern const struct ata_port_info ata_dummy_port_info;

static inline bool ata_is_atapi(u8 prot)
{
	return prot & ATA_PROT_FLAG_ATAPI;
}

static inline bool ata_is_pio(u8 prot)
{
	return prot & ATA_PROT_FLAG_PIO;
}

static inline bool ata_is_dma(u8 prot)
{
	return prot & ATA_PROT_FLAG_DMA;
}

static inline bool ata_is_ncq(u8 prot)
{
	return prot & ATA_PROT_FLAG_NCQ;
}

static inline bool ata_is_data(u8 prot)
{
	return prot & (ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA);
}

static inline int is_multi_taskfile(struct ata_taskfile *tf)
{
	return (tf->command == ATA_CMD_READ_MULTI) ||
	       (tf->command == ATA_CMD_WRITE_MULTI) ||
	       (tf->command == ATA_CMD_READ_MULTI_EXT) ||
	       (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
	       (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
}

static inline int ata_port_is_dummy(struct ata_port *ap)
{
	return ap->ops == &ata_dummy_port_ops;
}

static inline bool ata_port_is_frozen(const struct ata_port *ap)
{
	return ap->pflags & ATA_PFLAG_FROZEN;
}

extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
				int (*check_ready)(struct ata_link *link));
extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
			      unsigned long deadline);
extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);

extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
			const struct ata_port_info * const * ppi, int n_ports);
extern void ata_host_get(struct ata_host *host);
extern void ata_host_put(struct ata_host *host);
extern int ata_host_start(struct ata_host *host);
extern int ata_host_register(struct ata_host *host,
			     const struct scsi_host_template *sht);
extern int ata_host_activate(struct ata_host *host, int irq,
			     irq_handler_t irq_handler, unsigned long irq_flags,
			     const struct scsi_host_template *sht);
extern void ata_host_detach(struct ata_host *host);
extern void ata_host_init(struct ata_host *, struct device *, struct ata_port_operations *);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd,
			  void __user *arg);
#ifdef CONFIG_COMPAT
#define ATA_SCSI_COMPAT_IOCTL .compat_ioctl = ata_scsi_ioctl,
#else
#define ATA_SCSI_COMPAT_IOCTL /* empty */
#endif
extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
#if IS_REACHABLE(CONFIG_ATA)
bool ata_scsi_dma_need_drain(struct request *rq);
#else
#define ata_scsi_dma_need_drain NULL
#endif
extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
			    unsigned int cmd, void __user *arg);
extern bool ata_link_online(struct ata_link *link);
extern bool ata_link_offline(struct ata_link *link);
#ifdef CONFIG_PM
extern void ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
extern void ata_sas_port_suspend(struct ata_port *ap);
extern void ata_sas_port_resume(struct ata_port *ap);
#else
static inline void ata_sas_port_suspend(struct ata_port *ap)
{
}
static inline void ata_sas_port_resume(struct ata_port *ap)
{
}
#endif
extern int ata_ratelimit(void);
extern void ata_msleep(struct ata_port *ap, unsigned int msecs);
extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask,
			     u32 val, unsigned int interval, unsigned int timeout);
extern int atapi_cmd_type(u8 opcode);
extern unsigned int ata_pack_xfermask(unsigned int pio_mask,
				      unsigned int mwdma_mask,
				      unsigned int udma_mask);
extern void ata_unpack_xfermask(unsigned int xfer_mask,
				unsigned int *pio_mask,
				unsigned int *mwdma_mask,
				unsigned int *udma_mask);
extern u8 ata_xfer_mask2mode(unsigned int xfer_mask);
extern unsigned int ata_xfer_mode2mask(u8 xfer_mode);
extern int ata_xfer_mode2shift(u8 xfer_mode);
extern const char *ata_mode_string(unsigned int xfer_mask);
extern unsigned int ata_id_xfermask(const u16 *id);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
		 unsigned int n_elem);
extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
extern unsigned int ata_port_classify(struct ata_port *ap,
				      const struct ata_taskfile *tf);
extern void ata_dev_disable(struct ata_device *adev);
extern void ata_id_string(const u16 *id, unsigned char *s,
			  unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
			    unsigned int ofs, unsigned int len);
extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
				       struct ata_taskfile *tf, __le16 *id);
extern void ata_qc_complete(struct ata_queued_cmd *qc);
extern u64 ata_qc_get_active(struct ata_port *ap);
extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd);
extern int ata_std_bios_param(struct scsi_device *sdev,
			      struct block_device *bdev,
			      sector_t capacity, int geom[]);
extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
extern int ata_scsi_slave_alloc(struct scsi_device *sdev);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
				       int queue_depth);
extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
				  int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q);

/*
 * SATA specific code - drivers/ata/libata-sata.c
 */
#ifdef CONFIG_SATA_HOST
extern const unsigned int sata_deb_timing_normal[];
extern const unsigned int sata_deb_timing_hotplug[];
extern const unsigned int sata_deb_timing_long[];

static inline const unsigned int *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
	if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
		return sata_deb_timing_hotplug;
	else
		return sata_deb_timing_normal;
}

extern int sata_scr_valid(struct ata_link *link);
extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
extern int sata_set_spd(struct ata_link *link);
extern int sata_link_hardreset(struct ata_link *link,
			const unsigned int *timing, unsigned long deadline,
			bool *online, int (*check_ready)(struct ata_link *));
extern int sata_link_resume(struct ata_link *link, const unsigned int *params,
			    unsigned long deadline);
extern int ata_eh_read_sense_success_ncq_log(struct ata_link *link);
extern void ata_eh_analyze_ncq_error(struct ata_link *link);
#else
static inline const unsigned int *
sata_ehc_deb_timing(struct ata_eh_context *ehc)
{
	return NULL;
}
static inline int sata_scr_valid(struct ata_link *link) { return 0; }
static inline int sata_scr_read(struct ata_link *link, int reg, u32 *val)
{
	return -EOPNOTSUPP;
}
static inline int sata_scr_write(struct ata_link *link, int reg, u32 val)
{
	return -EOPNOTSUPP;
}
static inline int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
{
	return -EOPNOTSUPP;
}
static inline int sata_set_spd(struct ata_link *link) { return -EOPNOTSUPP; }
static inline int sata_link_hardreset(struct ata_link *link,
				      const unsigned int *timing,
				      unsigned long deadline,
				      bool *online,
				      int (*check_ready)(struct ata_link *))
{
	if (online)
		*online = false;
	return -EOPNOTSUPP;
}
static inline int sata_link_resume(struct ata_link *link,
				   const unsigned int *params,
				   unsigned long deadline)
{
	return -EOPNOTSUPP;
}
static inline int ata_eh_read_sense_success_ncq_log(struct ata_link *link)
{
	return -EOPNOTSUPP;
}
static inline void ata_eh_analyze_ncq_error(struct ata_link *link) { }
#endif
extern int sata_link_debounce(struct ata_link *link,
			      const unsigned int *params, unsigned long deadline);
extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
			     bool spm_wakeup);
extern int ata_slave_link_init(struct ata_port *ap);
extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
					   struct ata_port_info *, struct Scsi_Host *);
extern void ata_port_probe(struct ata_port *ap);
extern void ata_port_free(struct ata_port *ap);
extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap);
extern void ata_sas_tport_delete(struct ata_port *ap);
extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
			  u8 pmp, int is_cmd, u8 *fis);
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
extern bool sata_lpm_ignore_phy_events(struct ata_link *link);
extern int sata_async_notification(struct ata_port *ap);

extern int ata_cable_40wire(struct ata_port *ap);
extern int ata_cable_80wire(struct ata_port *ap);
extern int ata_cable_sata(struct ata_port *ap);
extern int ata_cable_ignore(struct ata_port *ap);
extern int ata_cable_unknown(struct ata_port *ap);

/* Timing helpers */
extern unsigned int ata_pio_need_iordy(const struct ata_device *);
extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);

/* PCI */
#ifdef CONFIG_PCI
struct pci_dev;

struct pci_bits {
	unsigned int		reg;	/* PCI config register to read */
	unsigned int		width;	/* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
	unsigned long		mask;
	unsigned long		val;
};

extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
extern void ata_pci_shutdown_one(struct pci_dev *pdev);
extern void ata_pci_remove_one(struct pci_dev *pdev);

#ifdef CONFIG_PM
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif /* CONFIG_PM */
#endif /* CONFIG_PCI */

struct platform_device;

extern void ata_platform_remove_one(struct platform_device *pdev);

/*
 * ACPI - drivers/ata/libata-acpi.c
 */
#ifdef CONFIG_ATA_ACPI
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
	if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
		return &ap->__acpi_init_gtm;
	return NULL;
}
int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
				   const struct ata_acpi_gtm *gtm);
int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
#else
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
	return NULL;
}

static inline int ata_acpi_stm(const struct ata_port *ap,
			       struct ata_acpi_gtm *stm)
{
	return -ENOSYS;
}

static inline int ata_acpi_gtm(const struct ata_port *ap,
			       struct ata_acpi_gtm *stm)
{
	return -ENOSYS;
}

static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
					const struct ata_acpi_gtm *gtm)
{
	return 0;
}

static inline int ata_acpi_cbl_80wire(struct ata_port *ap,
				      const struct ata_acpi_gtm *gtm)
{
	return 0;
}
#endif

/*
 * EH - drivers/ata/libata-eh.c
 */
extern void ata_port_schedule_eh(struct ata_port *ap);
extern void ata_port_wait_eh(struct ata_port *ap);
extern int ata_link_abort(struct ata_link *link);
extern int ata_port_abort(struct ata_port *ap);
extern int ata_port_freeze(struct ata_port *ap);

extern void ata_eh_freeze_port(struct ata_port *ap);
extern void ata_eh_thaw_port(struct ata_port *ap);

extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);

extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
		      ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
		      ata_postreset_fn_t postreset);
extern void ata_std_error_handler(struct ata_port *ap);
extern void ata_std_sched_eh(struct ata_port *ap);
extern void ata_std_end_eh(struct ata_port *ap);
extern int ata_link_nr_enabled(struct ata_link *link);

/*
 * Base operations to inherit from and initializers for sht
 *
 * Operations
 *
 * base  : Common to all libata drivers.
 * sata  : SATA controllers w/ native interface.
 * pmp   : SATA controllers w/ PMP support.
 * sff   : SFF ATA controllers w/o BMDMA support.
 * bmdma : SFF ATA controllers w/ BMDMA support.
 *
 * sht initializers
 *
 * BASE  : Common to all libata drivers.  The user must set
 *	   sg_tablesize and dma_boundary.
 * PIO   : SFF ATA controllers w/ only PIO support.
 * BMDMA : SFF ATA controllers w/ BMDMA support.  sg_tablesize and
 *	   dma_boundary are set to BMDMA limits.
 * NCQ   : SATA controllers supporting NCQ.  The user must set
 *	   sg_tablesize, dma_boundary and can_queue.
 */
extern const struct ata_port_operations ata_base_port_ops;
extern const struct ata_port_operations sata_port_ops;
extern const struct attribute_group *ata_common_sdev_groups[];

/*
 * All sht initializers (BASE, PIO, BMDMA, NCQ) must be instantiated
 * by the edge drivers.  Because the 'module' field of sht must be the
 * edge driver's module reference, otherwise the driver can be unloaded
 * even if the scsi_device is being accessed.
 */
#define __ATA_BASE_SHT(drv_name)				\
	.module			= THIS_MODULE,			\
	.name			= drv_name,			\
	.ioctl			= ata_scsi_ioctl,		\
	ATA_SCSI_COMPAT_IOCTL					\
	.queuecommand		= ata_scsi_queuecmd,		\
	.dma_need_drain		= ata_scsi_dma_need_drain,	\
	.this_id		= ATA_SHT_THIS_ID,		\
	.emulated		= ATA_SHT_EMULATED,		\
	.proc_name		= drv_name,			\
	.slave_alloc		= ata_scsi_slave_alloc,		\
	.slave_destroy		= ata_scsi_slave_destroy,	\
	.bios_param		= ata_std_bios_param,		\
	.unlock_native_capacity	= ata_scsi_unlock_native_capacity,\
	.max_sectors		= ATA_MAX_SECTORS_LBA48

#define ATA_SUBBASE_SHT(drv_name)				\
	__ATA_BASE_SHT(drv_name),				\
	.can_queue		= ATA_DEF_QUEUE,		\
	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,		\
	.slave_configure	= ata_scsi_slave_config

#define ATA_SUBBASE_SHT_QD(drv_name, drv_qd)			\
	__ATA_BASE_SHT(drv_name),				\
	.can_queue		= drv_qd,			\
	.tag_alloc_policy	= BLK_TAG_ALLOC_RR,		\
	.slave_configure	= ata_scsi_slave_config

#define ATA_BASE_SHT(drv_name)					\
	ATA_SUBBASE_SHT(drv_name),				\
	.sdev_groups		= ata_common_sdev_groups

#ifdef CONFIG_SATA_HOST
extern const struct attribute_group *ata_ncq_sdev_groups[];

#define ATA_NCQ_SHT(drv_name)					\
	ATA_SUBBASE_SHT(drv_name),				\
	.sdev_groups		= ata_ncq_sdev_groups,		\
	.change_queue_depth	= ata_scsi_change_queue_depth

#define ATA_NCQ_SHT_QD(drv_name, drv_qd)			\
	ATA_SUBBASE_SHT_QD(drv_name, drv_qd),			\
	.sdev_groups		= ata_ncq_sdev_groups,		\
	.change_queue_depth	= ata_scsi_change_queue_depth
#endif

/*
 * PMP helpers
 */
#ifdef CONFIG_SATA_PMP
static inline bool sata_pmp_supported(struct ata_port *ap)
{
	return ap->flags & ATA_FLAG_PMP;
}

static inline bool sata_pmp_attached(struct ata_port *ap)
{
	return ap->nr_pmp_links != 0;
}

static inline bool ata_is_host_link(const struct ata_link *link)
{
	return link == &link->ap->link || link == link->ap->slave_link;
}
#else /* CONFIG_SATA_PMP */
static inline bool sata_pmp_supported(struct ata_port *ap)
{
	return false;
}

static inline bool sata_pmp_attached(struct ata_port *ap)
{
	return false;
}

static inline bool ata_is_host_link(const struct ata_link *link)
{
	return true;
}
#endif /* CONFIG_SATA_PMP */

static inline int sata_srst_pmp(struct ata_link *link)
{
	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
		return SATA_PMP_CTRL_PORT;
	return link->pmp;
}

#define ata_port_printk(level, ap, fmt, ...)			\
	pr_ ## level ("ata%u: " fmt, (ap)->print_id, ##__VA_ARGS__)

#define ata_port_err(ap, fmt, ...)				\
	ata_port_printk(err, ap, fmt, ##__VA_ARGS__)
#define ata_port_warn(ap, fmt, ...)				\
	ata_port_printk(warn, ap, fmt, ##__VA_ARGS__)
#define ata_port_notice(ap, fmt, ...)				\
	ata_port_printk(notice, ap, fmt, ##__VA_ARGS__)
#define ata_port_info(ap, fmt, ...)				\
	ata_port_printk(info, ap, fmt, ##__VA_ARGS__)
#define ata_port_dbg(ap, fmt, ...)				\
	ata_port_printk(debug, ap, fmt, ##__VA_ARGS__)

#define ata_link_printk(level, link, fmt, ...)			\
do {								\
	if (sata_pmp_attached((link)->ap) ||			\
	    (link)->ap->slave_link)				\
		pr_ ## level ("ata%u.%02u: " fmt,		\
			      (link)->ap->print_id,		\
			      (link)->pmp,			\
			      ##__VA_ARGS__);			\
        else							\
		pr_ ## level ("ata%u: " fmt,			\
			      (link)->ap->print_id,		\
			      ##__VA_ARGS__);			\
} while (0)

#define ata_link_err(link, fmt, ...)				\
	ata_link_printk(err, link, fmt, ##__VA_ARGS__)
#define ata_link_warn(link, fmt, ...)				\
	ata_link_printk(warn, link, fmt, ##__VA_ARGS__)
#define ata_link_notice(link, fmt, ...)				\
	ata_link_printk(notice, link, fmt, ##__VA_ARGS__)
#define ata_link_info(link, fmt, ...)				\
	ata_link_printk(info, link, fmt, ##__VA_ARGS__)
#define ata_link_dbg(link, fmt, ...)				\
	ata_link_printk(debug, link, fmt, ##__VA_ARGS__)

#define ata_dev_printk(level, dev, fmt, ...)			\
        pr_ ## level("ata%u.%02u: " fmt,			\
               (dev)->link->ap->print_id,			\
	       (dev)->link->pmp + (dev)->devno,			\
	       ##__VA_ARGS__)

#define ata_dev_err(dev, fmt, ...)				\
	ata_dev_printk(err, dev, fmt, ##__VA_ARGS__)
#define ata_dev_warn(dev, fmt, ...)				\
	ata_dev_printk(warn, dev, fmt, ##__VA_ARGS__)
#define ata_dev_notice(dev, fmt, ...)				\
	ata_dev_printk(notice, dev, fmt, ##__VA_ARGS__)
#define ata_dev_info(dev, fmt, ...)				\
	ata_dev_printk(info, dev, fmt, ##__VA_ARGS__)
#define ata_dev_dbg(dev, fmt, ...)				\
	ata_dev_printk(debug, dev, fmt, ##__VA_ARGS__)

void ata_print_version(const struct device *dev, const char *version);

/*
 * ata_eh_info helpers
 */
extern __printf(2, 3)
void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
extern __printf(2, 3)
void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);

static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
{
	ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
	ehi->flags |= ATA_EHI_HOTPLUGGED;
	ehi->action |= ATA_EH_RESET | ATA_EH_ENABLE_LINK;
	ehi->err_mask |= AC_ERR_ATA_BUS;
}

/*
 * port description helpers
 */
extern __printf(2, 3)
void ata_port_desc(struct ata_port *ap, const char *fmt, ...);
#ifdef CONFIG_PCI
extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
			       const char *name);
#endif
static inline void ata_port_desc_misc(struct ata_port *ap, int irq)
{
	ata_port_desc(ap, "irq %d", irq);
	ata_port_desc(ap, "lpm-pol %d", ap->target_lpm_policy);
}

static inline bool ata_tag_internal(unsigned int tag)
{
	return tag == ATA_TAG_INTERNAL;
}

static inline bool ata_tag_valid(unsigned int tag)
{
	return tag < ATA_MAX_QUEUE || ata_tag_internal(tag);
}

#define __ata_qc_for_each(ap, qc, tag, max_tag, fn)		\
	for ((tag) = 0; (tag) < (max_tag) &&			\
	     ({ qc = fn((ap), (tag)); 1; }); (tag)++)		\

/*
 * Internal use only, iterate commands ignoring error handling and
 * status of 'qc'.
 */
#define ata_qc_for_each_raw(ap, qc, tag)					\
	__ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, __ata_qc_from_tag)

/*
 * Iterate all potential commands that can be queued
 */
#define ata_qc_for_each(ap, qc, tag)					\
	__ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, ata_qc_from_tag)

/*
 * Like ata_qc_for_each, but with the internal tag included
 */
#define ata_qc_for_each_with_internal(ap, qc, tag)			\
	__ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE + 1, ata_qc_from_tag)

/*
 * device helpers
 */
static inline unsigned int ata_class_enabled(unsigned int class)
{
	return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI ||
		class == ATA_DEV_PMP || class == ATA_DEV_SEMB ||
		class == ATA_DEV_ZAC;
}

static inline unsigned int ata_class_disabled(unsigned int class)
{
	return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP ||
		class == ATA_DEV_PMP_UNSUP || class == ATA_DEV_SEMB_UNSUP ||
		class == ATA_DEV_ZAC_UNSUP;
}

static inline unsigned int ata_class_absent(unsigned int class)
{
	return !ata_class_enabled(class) && !ata_class_disabled(class);
}

static inline unsigned int ata_dev_enabled(const struct ata_device *dev)
{
	return ata_class_enabled(dev->class);
}

static inline unsigned int ata_dev_disabled(const struct ata_device *dev)
{
	return ata_class_disabled(dev->class);
}

static inline unsigned int ata_dev_absent(const struct ata_device *dev)
{
	return ata_class_absent(dev->class);
}

/*
 * link helpers
 */
static inline int ata_link_max_devices(const struct ata_link *link)
{
	if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
		return 2;
	return 1;
}

static inline int ata_link_active(struct ata_link *link)
{
	return ata_tag_valid(link->active_tag) || link->sactive;
}

/*
 * Iterators
 *
 * ATA_LITER_* constants are used to select link iteration mode and
 * ATA_DITER_* device iteration mode.
 *
 * For a custom iteration directly using ata_{link|dev}_next(), if
 * @link or @dev, respectively, is NULL, the first element is
 * returned.  @dev and @link can be any valid device or link and the
 * next element according to the iteration mode will be returned.
 * After the last element, NULL is returned.
 */
enum ata_link_iter_mode {
	ATA_LITER_EDGE,		/* if present, PMP links only; otherwise,
				 * host link.  no slave link */
	ATA_LITER_HOST_FIRST,	/* host link followed by PMP or slave links */
	ATA_LITER_PMP_FIRST,	/* PMP links followed by host link,
				 * slave link still comes after host link */
};

enum ata_dev_iter_mode {
	ATA_DITER_ENABLED,
	ATA_DITER_ENABLED_REVERSE,
	ATA_DITER_ALL,
	ATA_DITER_ALL_REVERSE,
};

extern struct ata_link *ata_link_next(struct ata_link *link,
				      struct ata_port *ap,
				      enum ata_link_iter_mode mode);

extern struct ata_device *ata_dev_next(struct ata_device *dev,
				       struct ata_link *link,
				       enum ata_dev_iter_mode mode);

/*
 * Shortcut notation for iterations
 *
 * ata_for_each_link() iterates over each link of @ap according to
 * @mode.  @link points to the current link in the loop.  @link is
 * NULL after loop termination.  ata_for_each_dev() works the same way
 * except that it iterates over each device of @link.
 *
 * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be
 * specified when using the following shorthand notations.  Only the
 * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be
 * specified.  This not only increases brevity but also makes it
 * impossible to use ATA_LITER_* for device iteration or vice-versa.
 */
#define ata_for_each_link(link, ap, mode) \
	for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \
	     (link) = ata_link_next((link), (ap), ATA_LITER_##mode))

#define ata_for_each_dev(dev, link, mode) \
	for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \
	     (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode))

/**
 *	ata_ncq_supported - Test whether NCQ is supported
 *	@dev: ATA device to test
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 *
 *	RETURNS:
 *	true if @dev supports NCQ, false otherwise.
 */
static inline bool ata_ncq_supported(struct ata_device *dev)
{
	if (!IS_ENABLED(CONFIG_SATA_HOST))
		return false;
	return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
}

/**
 *	ata_ncq_enabled - Test whether NCQ is enabled
 *	@dev: ATA device to test
 *
 *	LOCKING:
 *	spin_lock_irqsave(host lock)
 *
 *	RETURNS:
 *	true if NCQ is enabled for @dev, false otherwise.
 */
static inline bool ata_ncq_enabled(struct ata_device *dev)
{
	return ata_ncq_supported(dev) && !(dev->flags & ATA_DFLAG_NCQ_OFF);
}

static inline bool ata_fpdma_dsm_supported(struct ata_device *dev)
{
	return (dev->flags & ATA_DFLAG_NCQ_SEND_RECV) &&
		(dev->ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &
		 ATA_LOG_NCQ_SEND_RECV_DSM_TRIM);
}

static inline bool ata_fpdma_read_log_supported(struct ata_device *dev)
{
	return (dev->flags & ATA_DFLAG_NCQ_SEND_RECV) &&
		(dev->ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_RD_LOG_OFFSET] &
		 ATA_LOG_NCQ_SEND_RECV_RD_LOG_SUPPORTED);
}

static inline bool ata_fpdma_zac_mgmt_in_supported(struct ata_device *dev)
{
	return (dev->flags & ATA_DFLAG_NCQ_SEND_RECV) &&
		(dev->ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_OFFSET] &
		ATA_LOG_NCQ_SEND_RECV_ZAC_MGMT_IN_SUPPORTED);
}

static inline bool ata_fpdma_zac_mgmt_out_supported(struct ata_device *dev)
{
	return (dev->ncq_non_data_cmds[ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OFFSET] &
		ATA_LOG_NCQ_NON_DATA_ZAC_MGMT_OUT);
}

static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
{
	qc->tf.ctl |= ATA_NIEN;
}

static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
						       unsigned int tag)
{
	if (ata_tag_valid(tag))
		return &ap->qcmd[tag];
	return NULL;
}

static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap,
						     unsigned int tag)
{
	struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);

	if (unlikely(!qc))
		return qc;

	if ((qc->flags & (ATA_QCFLAG_ACTIVE |
			  ATA_QCFLAG_EH)) == ATA_QCFLAG_ACTIVE)
		return qc;

	return NULL;
}

static inline unsigned int ata_qc_raw_nbytes(struct ata_queued_cmd *qc)
{
	return qc->nbytes - min(qc->extrabytes, qc->nbytes);
}

static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
{
	memset(tf, 0, sizeof(*tf));

#ifdef CONFIG_ATA_SFF
	tf->ctl = dev->link->ap->ctl;
#else
	tf->ctl = ATA_DEVCTL_OBS;
#endif
	if (dev->devno == 0)
		tf->device = ATA_DEVICE_OBS;
	else
		tf->device = ATA_DEVICE_OBS | ATA_DEV1;
}

static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
{
	qc->dma_dir = DMA_NONE;
	qc->sg = NULL;
	qc->flags = 0;
	qc->cursg = NULL;
	qc->cursg_ofs = 0;
	qc->nbytes = qc->extrabytes = qc->curbytes = 0;
	qc->n_elem = 0;
	qc->err_mask = 0;
	qc->sect_size = ATA_SECT_SIZE;

	ata_tf_init(qc->dev, &qc->tf);

	/* init result_tf such that it indicates normal completion */
	qc->result_tf.command = ATA_DRDY;
	qc->result_tf.feature = 0;
}

static inline int ata_try_flush_cache(const struct ata_device *dev)
{
	return ata_id_wcache_enabled(dev->id) ||
	       ata_id_has_flush(dev->id) ||
	       ata_id_has_flush_ext(dev->id);
}

static inline unsigned int ac_err_mask(u8 status)
{
	if (status & (ATA_BUSY | ATA_DRQ))
		return AC_ERR_HSM;
	if (status & (ATA_ERR | ATA_DF))
		return AC_ERR_DEV;
	return 0;
}

static inline unsigned int __ac_err_mask(u8 status)
{
	unsigned int mask = ac_err_mask(status);
	if (mask == 0)
		return AC_ERR_OTHER;
	return mask;
}

static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
{
	return *(struct ata_port **)&host->hostdata[0];
}

static inline int ata_check_ready(u8 status)
{
	if (!(status & ATA_BUSY))
		return 1;

	/* 0xff indicates either no device or device not ready */
	if (status == 0xff)
		return -ENODEV;

	return 0;
}

static inline unsigned long ata_deadline(unsigned long from_jiffies,
					 unsigned int timeout_msecs)
{
	return from_jiffies + msecs_to_jiffies(timeout_msecs);
}

/* Don't open code these in drivers as there are traps. Firstly the range may
   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
   > UDMA_0. Dyma ddreigiau */

static inline bool ata_using_mwdma(struct ata_device *adev)
{
	return adev->dma_mode >= XFER_MW_DMA_0 &&
		adev->dma_mode <= XFER_MW_DMA_4;
}

static inline bool ata_using_udma(struct ata_device *adev)
{
	return adev->dma_mode >= XFER_UDMA_0 &&
		adev->dma_mode <= XFER_UDMA_7;
}

static inline bool ata_dma_enabled(struct ata_device *adev)
{
	return adev->dma_mode != 0xFF;
}

/**************************************************************************
 * PATA timings - drivers/ata/libata-pata-timings.c
 */
extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
extern int ata_timing_compute(struct ata_device *, unsigned short,
			      struct ata_timing *, int, int);
extern void ata_timing_merge(const struct ata_timing *,
			     const struct ata_timing *, struct ata_timing *,
			     unsigned int);

/**************************************************************************
 * PMP - drivers/ata/libata-pmp.c
 */
#ifdef CONFIG_SATA_PMP

extern const struct ata_port_operations sata_pmp_port_ops;

extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
extern void sata_pmp_error_handler(struct ata_port *ap);

#else /* CONFIG_SATA_PMP */

#define sata_pmp_port_ops		sata_port_ops
#define sata_pmp_qc_defer_cmd_switch	ata_std_qc_defer
#define sata_pmp_error_handler		ata_std_error_handler

#endif /* CONFIG_SATA_PMP */


/**************************************************************************
 * SFF - drivers/ata/libata-sff.c
 */
#ifdef CONFIG_ATA_SFF

extern const struct ata_port_operations ata_sff_port_ops;
extern const struct ata_port_operations ata_bmdma32_port_ops;

/* PIO only, sg_tablesize and dma_boundary limits can be removed */
#define ATA_PIO_SHT(drv_name)					\
	ATA_BASE_SHT(drv_name),					\
	.sg_tablesize		= LIBATA_MAX_PRD,		\
	.dma_boundary		= ATA_DMA_BOUNDARY

extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
extern void ata_sff_pause(struct ata_port *ap);
extern void ata_sff_dma_pause(struct ata_port *ap);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
extern void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
extern void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
extern void ata_sff_exec_command(struct ata_port *ap,
				 const struct ata_taskfile *tf);
extern unsigned int ata_sff_data_xfer(struct ata_queued_cmd *qc,
			unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc,
			unsigned char *buf, unsigned int buflen, int rw);
extern void ata_sff_irq_on(struct ata_port *ap);
extern void ata_sff_irq_clear(struct ata_port *ap);
extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
			    u8 status, int in_wq);
extern void ata_sff_queue_work(struct work_struct *work);
extern void ata_sff_queue_delayed_work(struct delayed_work *dwork,
		unsigned long delay);
extern void ata_sff_queue_pio_task(struct ata_link *link, unsigned long delay);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern void ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
extern unsigned int ata_sff_port_intr(struct ata_port *ap,
				      struct ata_queued_cmd *qc);
extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
extern void ata_sff_lost_interrupt(struct ata_port *ap);
extern void ata_sff_freeze(struct ata_port *ap);
extern void ata_sff_thaw(struct ata_port *ap);
extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
extern unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
					  u8 *r_err);
extern int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
				    unsigned long deadline);
extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
			     unsigned long deadline);
extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
			       unsigned long deadline);
extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
extern int ata_pci_sff_init_host(struct ata_host *host);
extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
				    const struct ata_port_info * const * ppi,
				    struct ata_host **r_host);
extern int ata_pci_sff_activate_host(struct ata_host *host,
				     irq_handler_t irq_handler,
				     const struct scsi_host_template *sht);
extern int ata_pci_sff_init_one(struct pci_dev *pdev,
		const struct ata_port_info * const * ppi,
		const struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */

#ifdef CONFIG_ATA_BMDMA

extern const struct ata_port_operations ata_bmdma_port_ops;

#define ATA_BMDMA_SHT(drv_name)					\
	ATA_BASE_SHT(drv_name),					\
	.sg_tablesize		= LIBATA_MAX_PRD,		\
	.dma_boundary		= ATA_DMA_BOUNDARY

extern enum ata_completion_errors ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
extern enum ata_completion_errors ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
				      struct ata_queued_cmd *qc);
extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
extern void ata_bmdma_error_handler(struct ata_port *ap);
extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern int ata_bmdma_port_start(struct ata_port *ap);
extern int ata_bmdma_port_start32(struct ata_port *ap);

#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
extern void ata_pci_bmdma_init(struct ata_host *host);
extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
				      const struct ata_port_info * const * ppi,
				      struct ata_host **r_host);
extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
				  const struct ata_port_info * const * ppi,
				  const struct scsi_host_template *sht,
				  void *host_priv, int hflags);
#endif /* CONFIG_PCI */
#endif /* CONFIG_ATA_BMDMA */

/**
 *	ata_sff_busy_wait - Wait for a port status register
 *	@ap: Port to wait for.
 *	@bits: bits that must be clear
 *	@max: number of 10uS waits to perform
 *
 *	Waits up to max*10 microseconds for the selected bits in the port's
 *	status register to be cleared.
 *	Returns final value of status register.
 *
 *	LOCKING:
 *	Inherited from caller.
 */
static inline u8 ata_sff_busy_wait(struct ata_port *ap, unsigned int bits,
				   unsigned int max)
{
	u8 status;

	do {
		udelay(10);
		status = ap->ops->sff_check_status(ap);
		max--;
	} while (status != 0xff && (status & bits) && (max > 0));

	return status;
}

/**
 *	ata_wait_idle - Wait for a port to be idle.
 *	@ap: Port to wait for.
 *
 *	Waits up to 10ms for port's BUSY and DRQ signals to clear.
 *	Returns final value of status register.
 *
 *	LOCKING:
 *	Inherited from caller.
 */
static inline u8 ata_wait_idle(struct ata_port *ap)
{
	u8 status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);

	if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
		ata_port_dbg(ap, "abnormal Status 0x%X\n", status);

	return status;
}
#endif /* CONFIG_ATA_SFF */

#endif /* __LINUX_LIBATA_H__ */
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!