Current File : //proc/self/root/usr/src/linux-headers-6.8.0-60-generic/include/uapi/linux/dcbnl.h
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * Copyright (c) 2008-2011, Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
 * Place - Suite 330, Boston, MA 02111-1307 USA.
 *
 * Author: Lucy Liu <lucy.liu@intel.com>
 */

#ifndef __LINUX_DCBNL_H__
#define __LINUX_DCBNL_H__

#include <linux/types.h>

/* IEEE 802.1Qaz std supported values */
#define IEEE_8021QAZ_MAX_TCS	8

#define IEEE_8021QAZ_TSA_STRICT		0
#define IEEE_8021QAZ_TSA_CB_SHAPER	1
#define IEEE_8021QAZ_TSA_ETS		2
#define IEEE_8021QAZ_TSA_VENDOR		255

/* This structure contains the IEEE 802.1Qaz ETS managed object
 *
 * @willing: willing bit in ETS configuration TLV
 * @ets_cap: indicates supported capacity of ets feature
 * @cbs: credit based shaper ets algorithm supported
 * @tc_tx_bw: tc tx bandwidth indexed by traffic class
 * @tc_rx_bw: tc rx bandwidth indexed by traffic class
 * @tc_tsa: TSA Assignment table, indexed by traffic class
 * @prio_tc: priority assignment table mapping 8021Qp to traffic class
 * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
 * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
 * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
 *
 * Recommended values are used to set fields in the ETS recommendation TLV
 * with hardware offloaded LLDP.
 *
 * ----
 *  TSA Assignment 8 bit identifiers
 *	0	strict priority
 *	1	credit-based shaper
 *	2	enhanced transmission selection
 *	3-254	reserved
 *	255	vendor specific
 */
struct ieee_ets {
	__u8	willing;
	__u8	ets_cap;
	__u8	cbs;
	__u8	tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
	__u8	tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
	__u8	tc_tsa[IEEE_8021QAZ_MAX_TCS];
	__u8	prio_tc[IEEE_8021QAZ_MAX_TCS];
	__u8	tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
	__u8	tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
};

/* This structure contains rate limit extension to the IEEE 802.1Qaz ETS
 * managed object.
 * Values are 64 bits long and specified in Kbps to enable usage over both
 * slow and very fast networks.
 *
 * @tc_maxrate: maximal tc tx bandwidth indexed by traffic class
 */
struct ieee_maxrate {
	__u64	tc_maxrate[IEEE_8021QAZ_MAX_TCS];
};

enum dcbnl_cndd_states {
	DCB_CNDD_RESET = 0,
	DCB_CNDD_EDGE,
	DCB_CNDD_INTERIOR,
	DCB_CNDD_INTERIOR_READY,
};

/* This structure contains the IEEE 802.1Qau QCN managed object.
 *
 *@rpg_enable: enable QCN RP
 *@rppp_max_rps: maximum number of RPs allowed for this CNPV on this port
 *@rpg_time_reset: time between rate increases if no CNMs received.
 *		   given in u-seconds
 *@rpg_byte_reset: transmitted data between rate increases if no CNMs received.
 *		   given in Bytes
 *@rpg_threshold: The number of times rpByteStage or rpTimeStage can count
 *		   before RP rate control state machine advances states
 *@rpg_max_rate: the maxinun rate, in Mbits per second,
 *		 at which an RP can transmit
 *@rpg_ai_rate: The rate, in Mbits per second,
 *		used to increase rpTargetRate in the RPR_ACTIVE_INCREASE
 *@rpg_hai_rate: The rate, in Mbits per second,
 *		 used to increase rpTargetRate in the RPR_HYPER_INCREASE state
 *@rpg_gd: Upon CNM receive, flow rate is limited to (Fb/Gd)*CurrentRate.
 *	   rpgGd is given as log2(Gd), where Gd may only be powers of 2
 *@rpg_min_dec_fac: The minimum factor by which the current transmit rate
 *		    can be changed by reception of a CNM.
 *		    value is given as percentage (1-100)
 *@rpg_min_rate: The minimum value, in bits per second, for rate to limit
 *@cndd_state_machine: The state of the congestion notification domain
 *		       defense state machine, as defined by IEEE 802.3Qau
 *		       section 32.1.1. In the interior ready state,
 *		       the QCN capable hardware may add CN-TAG TLV to the
 *		       outgoing traffic, to specifically identify outgoing
 *		       flows.
 */

struct ieee_qcn {
	__u8 rpg_enable[IEEE_8021QAZ_MAX_TCS];
	__u32 rppp_max_rps[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_time_reset[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_byte_reset[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_threshold[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_max_rate[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_ai_rate[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_hai_rate[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_gd[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_min_dec_fac[IEEE_8021QAZ_MAX_TCS];
	__u32 rpg_min_rate[IEEE_8021QAZ_MAX_TCS];
	__u32 cndd_state_machine[IEEE_8021QAZ_MAX_TCS];
};

/* This structure contains the IEEE 802.1Qau QCN statistics.
 *
 *@rppp_rp_centiseconds: the number of RP-centiseconds accumulated
 *			 by RPs at this priority level on this Port
 *@rppp_created_rps: number of active RPs(flows) that react to CNMs
 */

struct ieee_qcn_stats {
	__u64 rppp_rp_centiseconds[IEEE_8021QAZ_MAX_TCS];
	__u32 rppp_created_rps[IEEE_8021QAZ_MAX_TCS];
};

/* This structure contains the IEEE 802.1Qaz PFC managed object
 *
 * @pfc_cap: Indicates the number of traffic classes on the local device
 *	     that may simultaneously have PFC enabled.
 * @pfc_en: bitmap indicating pfc enabled traffic classes
 * @mbc: enable macsec bypass capability
 * @delay: the allowance made for a round-trip propagation delay of the
 *	   link in bits.
 * @requests: count of the sent pfc frames
 * @indications: count of the received pfc frames
 */
struct ieee_pfc {
	__u8	pfc_cap;
	__u8	pfc_en;
	__u8	mbc;
	__u16	delay;
	__u64	requests[IEEE_8021QAZ_MAX_TCS];
	__u64	indications[IEEE_8021QAZ_MAX_TCS];
};

#define IEEE_8021Q_MAX_PRIORITIES 8
#define DCBX_MAX_BUFFERS  8
struct dcbnl_buffer {
	/* priority to buffer mapping */
	__u8    prio2buffer[IEEE_8021Q_MAX_PRIORITIES];
	/* buffer size in Bytes */
	__u32   buffer_size[DCBX_MAX_BUFFERS];
	__u32   total_size;
};

/* CEE DCBX std supported values */
#define CEE_DCBX_MAX_PGS	8
#define CEE_DCBX_MAX_PRIO	8

/**
 * struct cee_pg - CEE Priority-Group managed object
 *
 * @willing: willing bit in the PG tlv
 * @error: error bit in the PG tlv
 * @pg_en: enable bit of the PG feature
 * @tcs_supported: number of traffic classes supported
 * @pg_bw: bandwidth percentage for each priority group
 * @prio_pg: priority to PG mapping indexed by priority
 */
struct cee_pg {
	__u8    willing;
	__u8    error;
	__u8    pg_en;
	__u8    tcs_supported;
	__u8    pg_bw[CEE_DCBX_MAX_PGS];
	__u8    prio_pg[CEE_DCBX_MAX_PGS];
};

/**
 * struct cee_pfc - CEE PFC managed object
 *
 * @willing: willing bit in the PFC tlv
 * @error: error bit in the PFC tlv
 * @pfc_en: bitmap indicating pfc enabled traffic classes
 * @tcs_supported: number of traffic classes supported
 */
struct cee_pfc {
	__u8    willing;
	__u8    error;
	__u8    pfc_en;
	__u8    tcs_supported;
};

/* IEEE 802.1Qaz std supported values */
#define IEEE_8021QAZ_APP_SEL_ETHERTYPE	1
#define IEEE_8021QAZ_APP_SEL_STREAM	2
#define IEEE_8021QAZ_APP_SEL_DGRAM	3
#define IEEE_8021QAZ_APP_SEL_ANY	4
#define IEEE_8021QAZ_APP_SEL_DSCP       5

/* Non-std selector values */
#define DCB_APP_SEL_PCP 255

/* This structure contains the IEEE 802.1Qaz APP managed object. This
 * object is also used for the CEE std as well.
 *
 * @selector: protocol identifier type
 * @protocol: protocol of type indicated
 * @priority: 3-bit unsigned integer indicating priority for IEEE
 *            8-bit 802.1p user priority bitmap for CEE
 *
 * ----
 *  Selector field values for IEEE 802.1Qaz
 *	0	Reserved
 *	1	Ethertype
 *	2	Well known port number over TCP or SCTP
 *	3	Well known port number over UDP or DCCP
 *	4	Well known port number over TCP, SCTP, UDP, or DCCP
 *	5	Differentiated Services Code Point (DSCP) value
 *	6-7	Reserved
 *
 *  Selector field values for CEE
 *	0	Ethertype
 *	1	Well known port number over TCP or UDP
 *	2-3	Reserved
 */
struct dcb_app {
	__u8	selector;
	__u8	priority;
	__u16	protocol;
};

#define IEEE_8021QAZ_APP_SEL_MAX 255

/**
 * struct dcb_peer_app_info - APP feature information sent by the peer
 *
 * @willing: willing bit in the peer APP tlv
 * @error: error bit in the peer APP tlv
 *
 * In addition to this information the full peer APP tlv also contains
 * a table of 'app_count' APP objects defined above.
 */
struct dcb_peer_app_info {
	__u8	willing;
	__u8	error;
};

struct dcbmsg {
	__u8               dcb_family;
	__u8               cmd;
	__u16              dcb_pad;
};

/**
 * enum dcbnl_commands - supported DCB commands
 *
 * @DCB_CMD_UNDEFINED: unspecified command to catch errors
 * @DCB_CMD_GSTATE: request the state of DCB in the device
 * @DCB_CMD_SSTATE: set the state of DCB in the device
 * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
 * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
 * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
 * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
 * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
 * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
 * @DCB_CMD_SET_ALL: apply all changes to the underlying device
 * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
 *                        device.  Only useful when using bonding.
 * @DCB_CMD_GCAP: request the DCB capabilities of the device
 * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
 * @DCB_CMD_SNUMTCS: set the number of traffic classes
 * @DCB_CMD_GBCN: set backward congestion notification configuration
 * @DCB_CMD_SBCN: get backward congestion notification configuration.
 * @DCB_CMD_GAPP: get application protocol configuration
 * @DCB_CMD_SAPP: set application protocol configuration
 * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
 * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
 * @DCB_CMD_GDCBX: get DCBX engine configuration
 * @DCB_CMD_SDCBX: set DCBX engine configuration
 * @DCB_CMD_GFEATCFG: get DCBX features flags
 * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
 * @DCB_CMD_CEE_GET: get CEE aggregated configuration
 * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration
 */
enum dcbnl_commands {
	DCB_CMD_UNDEFINED,

	DCB_CMD_GSTATE,
	DCB_CMD_SSTATE,

	DCB_CMD_PGTX_GCFG,
	DCB_CMD_PGTX_SCFG,
	DCB_CMD_PGRX_GCFG,
	DCB_CMD_PGRX_SCFG,

	DCB_CMD_PFC_GCFG,
	DCB_CMD_PFC_SCFG,

	DCB_CMD_SET_ALL,

	DCB_CMD_GPERM_HWADDR,

	DCB_CMD_GCAP,

	DCB_CMD_GNUMTCS,
	DCB_CMD_SNUMTCS,

	DCB_CMD_PFC_GSTATE,
	DCB_CMD_PFC_SSTATE,

	DCB_CMD_BCN_GCFG,
	DCB_CMD_BCN_SCFG,

	DCB_CMD_GAPP,
	DCB_CMD_SAPP,

	DCB_CMD_IEEE_SET,
	DCB_CMD_IEEE_GET,

	DCB_CMD_GDCBX,
	DCB_CMD_SDCBX,

	DCB_CMD_GFEATCFG,
	DCB_CMD_SFEATCFG,

	DCB_CMD_CEE_GET,
	DCB_CMD_IEEE_DEL,

	__DCB_CMD_ENUM_MAX,
	DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
};

/**
 * enum dcbnl_attrs - DCB top-level netlink attributes
 *
 * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
 * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
 * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
 * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
 * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
 * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
 * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
 * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
 * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
 * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
 * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
 * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
 * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
 * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
 * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
 * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED)
 */
enum dcbnl_attrs {
	DCB_ATTR_UNDEFINED,

	DCB_ATTR_IFNAME,
	DCB_ATTR_STATE,
	DCB_ATTR_PFC_STATE,
	DCB_ATTR_PFC_CFG,
	DCB_ATTR_NUM_TC,
	DCB_ATTR_PG_CFG,
	DCB_ATTR_SET_ALL,
	DCB_ATTR_PERM_HWADDR,
	DCB_ATTR_CAP,
	DCB_ATTR_NUMTCS,
	DCB_ATTR_BCN,
	DCB_ATTR_APP,

	/* IEEE std attributes */
	DCB_ATTR_IEEE,

	DCB_ATTR_DCBX,
	DCB_ATTR_FEATCFG,

	/* CEE nested attributes */
	DCB_ATTR_CEE,

	__DCB_ATTR_ENUM_MAX,
	DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
};

/**
 * enum ieee_attrs - IEEE 802.1Qaz get/set attributes
 *
 * @DCB_ATTR_IEEE_UNSPEC: unspecified
 * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration
 * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration
 * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration
 * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only
 * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
 * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
 * @DCB_ATTR_DCB_APP_TRUST_TABLE: selector trust table
 * @DCB_ATTR_DCB_REWR_TABLE: rewrite configuration
 */
enum ieee_attrs {
	DCB_ATTR_IEEE_UNSPEC,
	DCB_ATTR_IEEE_ETS,
	DCB_ATTR_IEEE_PFC,
	DCB_ATTR_IEEE_APP_TABLE,
	DCB_ATTR_IEEE_PEER_ETS,
	DCB_ATTR_IEEE_PEER_PFC,
	DCB_ATTR_IEEE_PEER_APP,
	DCB_ATTR_IEEE_MAXRATE,
	DCB_ATTR_IEEE_QCN,
	DCB_ATTR_IEEE_QCN_STATS,
	DCB_ATTR_DCB_BUFFER,
	DCB_ATTR_DCB_APP_TRUST_TABLE,
	DCB_ATTR_DCB_REWR_TABLE,
	__DCB_ATTR_IEEE_MAX
};
#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)

enum ieee_attrs_app {
	DCB_ATTR_IEEE_APP_UNSPEC,
	DCB_ATTR_IEEE_APP,
	DCB_ATTR_DCB_APP,
	__DCB_ATTR_IEEE_APP_MAX
};
#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)

/**
 * enum cee_attrs - CEE DCBX get attributes.
 *
 * @DCB_ATTR_CEE_UNSPEC: unspecified
 * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only
 * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only
 * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only
 * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG)
 * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG)
 * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG)
 * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP)
 * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG)
 *
 * An aggregated collection of the cee std negotiated parameters.
 */
enum cee_attrs {
	DCB_ATTR_CEE_UNSPEC,
	DCB_ATTR_CEE_PEER_PG,
	DCB_ATTR_CEE_PEER_PFC,
	DCB_ATTR_CEE_PEER_APP_TABLE,
	DCB_ATTR_CEE_TX_PG,
	DCB_ATTR_CEE_RX_PG,
	DCB_ATTR_CEE_PFC,
	DCB_ATTR_CEE_APP_TABLE,
	DCB_ATTR_CEE_FEAT,
	__DCB_ATTR_CEE_MAX
};
#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1)

enum peer_app_attr {
	DCB_ATTR_CEE_PEER_APP_UNSPEC,
	DCB_ATTR_CEE_PEER_APP_INFO,
	DCB_ATTR_CEE_PEER_APP,
	__DCB_ATTR_CEE_PEER_APP_MAX
};
#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1)

enum cee_attrs_app {
	DCB_ATTR_CEE_APP_UNSPEC,
	DCB_ATTR_CEE_APP,
	__DCB_ATTR_CEE_APP_MAX
};
#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1)

/**
 * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
 *
 * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
 * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
 * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
 * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
 * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
 * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
 * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
 * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
 * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
 * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
 * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
 *
 */
enum dcbnl_pfc_up_attrs {
	DCB_PFC_UP_ATTR_UNDEFINED,

	DCB_PFC_UP_ATTR_0,
	DCB_PFC_UP_ATTR_1,
	DCB_PFC_UP_ATTR_2,
	DCB_PFC_UP_ATTR_3,
	DCB_PFC_UP_ATTR_4,
	DCB_PFC_UP_ATTR_5,
	DCB_PFC_UP_ATTR_6,
	DCB_PFC_UP_ATTR_7,
	DCB_PFC_UP_ATTR_ALL,

	__DCB_PFC_UP_ATTR_ENUM_MAX,
	DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
};

/**
 * enum dcbnl_pg_attrs - DCB Priority Group attributes
 *
 * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
 * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
 * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
 * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
 * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
 * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
 * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
 *
 */
enum dcbnl_pg_attrs {
	DCB_PG_ATTR_UNDEFINED,

	DCB_PG_ATTR_TC_0,
	DCB_PG_ATTR_TC_1,
	DCB_PG_ATTR_TC_2,
	DCB_PG_ATTR_TC_3,
	DCB_PG_ATTR_TC_4,
	DCB_PG_ATTR_TC_5,
	DCB_PG_ATTR_TC_6,
	DCB_PG_ATTR_TC_7,
	DCB_PG_ATTR_TC_MAX,
	DCB_PG_ATTR_TC_ALL,

	DCB_PG_ATTR_BW_ID_0,
	DCB_PG_ATTR_BW_ID_1,
	DCB_PG_ATTR_BW_ID_2,
	DCB_PG_ATTR_BW_ID_3,
	DCB_PG_ATTR_BW_ID_4,
	DCB_PG_ATTR_BW_ID_5,
	DCB_PG_ATTR_BW_ID_6,
	DCB_PG_ATTR_BW_ID_7,
	DCB_PG_ATTR_BW_ID_MAX,
	DCB_PG_ATTR_BW_ID_ALL,

	__DCB_PG_ATTR_ENUM_MAX,
	DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
};

/**
 * enum dcbnl_tc_attrs - DCB Traffic Class attributes
 *
 * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
 * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
 *                          Valid values are:  0-7
 * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
 *                                Some devices may not support changing the
 *                                user priority map of a TC.
 * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
 *                                 0 - none
 *                                 1 - group strict
 *                                 2 - link strict
 * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
 *                            not configured to use link strict priority,
 *                            this is the percentage of bandwidth of the
 *                            priority group this traffic class belongs to
 * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
 *
 */
enum dcbnl_tc_attrs {
	DCB_TC_ATTR_PARAM_UNDEFINED,

	DCB_TC_ATTR_PARAM_PGID,
	DCB_TC_ATTR_PARAM_UP_MAPPING,
	DCB_TC_ATTR_PARAM_STRICT_PRIO,
	DCB_TC_ATTR_PARAM_BW_PCT,
	DCB_TC_ATTR_PARAM_ALL,

	__DCB_TC_ATTR_PARAM_ENUM_MAX,
	DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
};

/**
 * enum dcbnl_cap_attrs - DCB Capability attributes
 *
 * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
 * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
 * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
 * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
 * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
 *                               traffic class mapping
 * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
 *                                number of traffic classes the device
 *                                can be configured to use for Priority Groups
 * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
 *                                 number of traffic classes the device can be
 *                                 configured to use for Priority Flow Control
 * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
 * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
 *                             Notification
 * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
 *
 */
enum dcbnl_cap_attrs {
	DCB_CAP_ATTR_UNDEFINED,
	DCB_CAP_ATTR_ALL,
	DCB_CAP_ATTR_PG,
	DCB_CAP_ATTR_PFC,
	DCB_CAP_ATTR_UP2TC,
	DCB_CAP_ATTR_PG_TCS,
	DCB_CAP_ATTR_PFC_TCS,
	DCB_CAP_ATTR_GSP,
	DCB_CAP_ATTR_BCN,
	DCB_CAP_ATTR_DCBX,

	__DCB_CAP_ATTR_ENUM_MAX,
	DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
};

/**
 * DCBX capability flags
 *
 * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
 *                     'set' routines are used to configure the device with
 *                     the negotiated parameters
 *
 * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
 *                            by another entity
 *                            'get' routines are used to retrieve the
 *                            negotiated parameters
 *                            'set' routines can be used to set the initial
 *                            negotiation configuration
 *
 * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
 *                        supports the CEE protocol flavor
 *
 * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
 *                         supports the IEEE protocol flavor
 *
 * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
 *                       supports static configuration (i.e no actual
 *                       negotiation is performed negotiated parameters equal
 *                       the initial configuration)
 *
 */
#define DCB_CAP_DCBX_HOST		0x01
#define DCB_CAP_DCBX_LLD_MANAGED	0x02
#define DCB_CAP_DCBX_VER_CEE		0x04
#define DCB_CAP_DCBX_VER_IEEE		0x08
#define DCB_CAP_DCBX_STATIC		0x10

/**
 * enum dcbnl_numtcs_attrs - number of traffic classes
 *
 * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
 * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
 * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
 *                               priority groups
 * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
 *                                support priority flow control
 */
enum dcbnl_numtcs_attrs {
	DCB_NUMTCS_ATTR_UNDEFINED,
	DCB_NUMTCS_ATTR_ALL,
	DCB_NUMTCS_ATTR_PG,
	DCB_NUMTCS_ATTR_PFC,

	__DCB_NUMTCS_ATTR_ENUM_MAX,
	DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
};

enum dcbnl_bcn_attrs{
	DCB_BCN_ATTR_UNDEFINED = 0,

	DCB_BCN_ATTR_RP_0,
	DCB_BCN_ATTR_RP_1,
	DCB_BCN_ATTR_RP_2,
	DCB_BCN_ATTR_RP_3,
	DCB_BCN_ATTR_RP_4,
	DCB_BCN_ATTR_RP_5,
	DCB_BCN_ATTR_RP_6,
	DCB_BCN_ATTR_RP_7,
	DCB_BCN_ATTR_RP_ALL,

	DCB_BCN_ATTR_BCNA_0,
	DCB_BCN_ATTR_BCNA_1,
	DCB_BCN_ATTR_ALPHA,
	DCB_BCN_ATTR_BETA,
	DCB_BCN_ATTR_GD,
	DCB_BCN_ATTR_GI,
	DCB_BCN_ATTR_TMAX,
	DCB_BCN_ATTR_TD,
	DCB_BCN_ATTR_RMIN,
	DCB_BCN_ATTR_W,
	DCB_BCN_ATTR_RD,
	DCB_BCN_ATTR_RU,
	DCB_BCN_ATTR_WRTT,
	DCB_BCN_ATTR_RI,
	DCB_BCN_ATTR_C,
	DCB_BCN_ATTR_ALL,

	__DCB_BCN_ATTR_ENUM_MAX,
	DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
};

/**
 * enum dcb_general_attr_values - general DCB attribute values
 *
 * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
 *
 */
enum dcb_general_attr_values {
	DCB_ATTR_VALUE_UNDEFINED = 0xff
};

#define DCB_APP_IDTYPE_ETHTYPE	0x00
#define DCB_APP_IDTYPE_PORTNUM	0x01
enum dcbnl_app_attrs {
	DCB_APP_ATTR_UNDEFINED,

	DCB_APP_ATTR_IDTYPE,
	DCB_APP_ATTR_ID,
	DCB_APP_ATTR_PRIORITY,

	__DCB_APP_ATTR_ENUM_MAX,
	DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
};

/**
 * enum dcbnl_featcfg_attrs - features conifiguration flags
 *
 * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
 * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
 * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
 * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
 *                                 flow control
 * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
 *
 */
#define DCB_FEATCFG_ERROR	0x01	/* error in feature resolution */
#define DCB_FEATCFG_ENABLE	0x02	/* enable feature */
#define DCB_FEATCFG_WILLING	0x04	/* feature is willing */
#define DCB_FEATCFG_ADVERTISE	0x08	/* advertise feature */
enum dcbnl_featcfg_attrs {
	DCB_FEATCFG_ATTR_UNDEFINED,
	DCB_FEATCFG_ATTR_ALL,
	DCB_FEATCFG_ATTR_PG,
	DCB_FEATCFG_ATTR_PFC,
	DCB_FEATCFG_ATTR_APP,

	__DCB_FEATCFG_ATTR_ENUM_MAX,
	DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
};

#endif /* __LINUX_DCBNL_H__ */
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!