| Current File : //proc/self/root/usr/src/linux-headers-6.8.0-60-generic/drivers/soc/tegra/Kconfig |
# SPDX-License-Identifier: GPL-2.0-only
if ARCH_TEGRA
# 32-bit ARM SoCs
if ARM
config ARCH_TEGRA_2x_SOC
bool "Enable support for Tegra20 family"
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_ERRATA_720789
select ARM_ERRATA_754327 if SMP
select ARM_ERRATA_764369 if SMP
select PINCTRL_TEGRA20
select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
select SOC_TEGRA_FLOWCTRL
select SOC_TEGRA_PMC
select SOC_TEGRA20_VOLTAGE_COUPLER if REGULATOR
select TEGRA_TIMER
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config ARCH_TEGRA_3x_SOC
bool "Enable support for Tegra30 family"
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select PINCTRL_TEGRA30
select PL310_ERRATA_769419 if CACHE_L2X0
select SOC_TEGRA_FLOWCTRL
select SOC_TEGRA_PMC
select SOC_TEGRA30_VOLTAGE_COUPLER if REGULATOR
select TEGRA_TIMER
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
config ARCH_TEGRA_114_SOC
bool "Enable support for Tegra114 family"
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select PINCTRL_TEGRA114
select SOC_TEGRA_FLOWCTRL
select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Support for NVIDIA Tegra T114 processor family, based on the
ARM CortexA15MP CPU
config ARCH_TEGRA_124_SOC
bool "Enable support for Tegra124 family"
select HAVE_ARM_ARCH_TIMER
select PINCTRL_TEGRA124
select SOC_TEGRA_FLOWCTRL
select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Support for NVIDIA Tegra T124 processor family, based on the
ARM CortexA15MP CPU
endif
# 64-bit ARM SoCs
if ARM64
config ARCH_TEGRA_132_SOC
bool "NVIDIA Tegra132 SoC"
select PINCTRL_TEGRA124
select SOC_TEGRA_FLOWCTRL
select SOC_TEGRA_PMC
help
Enable support for NVIDIA Tegra132 SoC, based on the Denver
ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC,
but contains an NVIDIA Denver CPU complex in place of
Tegra124's "4+1" Cortex-A15 CPU complex.
config ARCH_TEGRA_210_SOC
bool "NVIDIA Tegra210 SoC"
select PINCTRL_TEGRA210
select SOC_TEGRA_FLOWCTRL
select SOC_TEGRA_PMC
select TEGRA_TIMER
help
Enable support for the NVIDIA Tegra210 SoC. Also known as Tegra X1,
the Tegra210 has four Cortex-A57 cores paired with four Cortex-A53
cores in a switched configuration. It features a GPU of the Maxwell
architecture with support for DX11, SM4, OpenGL 4.5, OpenGL ES 3.1
and providing 256 CUDA cores. It supports hardware-accelerated en-
and decoding of various video standards including H.265, H.264 and
VP8 at 4K resolution and up to 60 fps.
Besides the multimedia features it also comes with a variety of I/O
controllers, such as GPIO, I2C, SPI, SDHCI, PCIe, SATA and XHCI, to
name only a few.
config ARCH_TEGRA_186_SOC
bool "NVIDIA Tegra186 SoC"
depends on !CPU_BIG_ENDIAN
select MAILBOX
select TEGRA_BPMP
select TEGRA_HSP_MBOX
select TEGRA_IVC
select SOC_TEGRA_PMC
help
Enable support for the NVIDIA Tegar186 SoC. The Tegra186 features a
combination of Denver and Cortex-A57 CPU cores and a GPU based on
the Pascal architecture. It contains an ADSP with a Cortex-A9 CPU
used for audio processing, hardware video encoders/decoders with
multi-format support, ISP for image capture processing and BPMP for
power management.
config ARCH_TEGRA_194_SOC
bool "NVIDIA Tegra194 SoC"
depends on !CPU_BIG_ENDIAN
select MAILBOX
select PINCTRL_TEGRA194
select TEGRA_BPMP
select TEGRA_HSP_MBOX
select TEGRA_IVC
select SOC_TEGRA_PMC
help
Enable support for the NVIDIA Tegra194 SoC.
config ARCH_TEGRA_234_SOC
bool "NVIDIA Tegra234 SoC"
depends on !CPU_BIG_ENDIAN
select MAILBOX
select PINCTRL_TEGRA234
select TEGRA_BPMP
select TEGRA_HSP_MBOX
select TEGRA_IVC
select SOC_TEGRA_PMC
help
Enable support for the NVIDIA Tegra234 SoC.
endif
endif
config SOC_TEGRA_FUSE
def_bool y
depends on ARCH_TEGRA
select SOC_BUS
config SOC_TEGRA_FLOWCTRL
bool
config SOC_TEGRA_PMC
bool
select GENERIC_PINCONF
select IRQ_DOMAIN_HIERARCHY
select PM_OPP
select PM_GENERIC_DOMAINS
select REGMAP
config SOC_TEGRA20_VOLTAGE_COUPLER
bool "Voltage scaling support for Tegra20 SoCs"
depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST
depends on REGULATOR
config SOC_TEGRA30_VOLTAGE_COUPLER
bool "Voltage scaling support for Tegra30 SoCs"
depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
depends on REGULATOR
config SOC_TEGRA_CBB
tristate "Tegra driver to handle error from CBB"
depends on ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC
default y
help
Support for handling error from Tegra Control Backbone(CBB).
This driver handles the errors from CBB and prints debug
information about the failed transactions.