| Current File : //proc/self/root/usr/src/linux-headers-6.8.0-60/include/media/drv-intf/cx25840.h |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* cx25840.h - definition for cx25840/1/2/3 inputs
*
* Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
*/
#ifndef _CX25840_H_
#define _CX25840_H_
/*
* Note that the cx25840 driver requires that the bridge driver calls the
* v4l2_subdev's load_fw operation in order to load the driver's firmware.
* This will load the firmware on the first invocation (further ones are NOP).
* Without this the audio standard detection will fail and you will
* only get mono.
* Alternatively, you can call the reset operation (this can be done
* multiple times if needed, each invocation will fully reinitialize
* the device).
*
* Since loading the firmware is often problematic when the driver is
* compiled into the kernel I recommend postponing calling this function
* until the first open of the video device. Another reason for
* postponing it is that loading this firmware takes a long time (seconds)
* due to the slow i2c bus speed. So it will speed up the boot process if
* you can avoid loading the fw as long as the video device isn't used.
*/
enum cx25840_video_input {
/* Composite video inputs In1-In8 */
CX25840_COMPOSITE1 = 1,
CX25840_COMPOSITE2,
CX25840_COMPOSITE3,
CX25840_COMPOSITE4,
CX25840_COMPOSITE5,
CX25840_COMPOSITE6,
CX25840_COMPOSITE7,
CX25840_COMPOSITE8,
/*
* S-Video inputs consist of one luma input (In1-In8) ORed with one
* chroma input (In5-In8)
*/
CX25840_SVIDEO_LUMA1 = 0x10,
CX25840_SVIDEO_LUMA2 = 0x20,
CX25840_SVIDEO_LUMA3 = 0x30,
CX25840_SVIDEO_LUMA4 = 0x40,
CX25840_SVIDEO_LUMA5 = 0x50,
CX25840_SVIDEO_LUMA6 = 0x60,
CX25840_SVIDEO_LUMA7 = 0x70,
CX25840_SVIDEO_LUMA8 = 0x80,
CX25840_SVIDEO_CHROMA4 = 0x400,
CX25840_SVIDEO_CHROMA5 = 0x500,
CX25840_SVIDEO_CHROMA6 = 0x600,
CX25840_SVIDEO_CHROMA7 = 0x700,
CX25840_SVIDEO_CHROMA8 = 0x800,
/* S-Video aliases for common luma/chroma combinations */
CX25840_SVIDEO1 = 0x510,
CX25840_SVIDEO2 = 0x620,
CX25840_SVIDEO3 = 0x730,
CX25840_SVIDEO4 = 0x840,
/* Allow frames to specify specific input configurations */
CX25840_VIN1_CH1 = 0x80000000,
CX25840_VIN2_CH1 = 0x80000001,
CX25840_VIN3_CH1 = 0x80000002,
CX25840_VIN4_CH1 = 0x80000003,
CX25840_VIN5_CH1 = 0x80000004,
CX25840_VIN6_CH1 = 0x80000005,
CX25840_VIN7_CH1 = 0x80000006,
CX25840_VIN8_CH1 = 0x80000007,
CX25840_VIN4_CH2 = 0x80000000,
CX25840_VIN5_CH2 = 0x80000010,
CX25840_VIN6_CH2 = 0x80000020,
CX25840_NONE_CH2 = 0x80000030,
CX25840_VIN7_CH3 = 0x80000000,
CX25840_VIN8_CH3 = 0x80000040,
CX25840_NONE0_CH3 = 0x80000080,
CX25840_NONE1_CH3 = 0x800000c0,
CX25840_SVIDEO_ON = 0x80000100,
CX25840_COMPONENT_ON = 0x80000200,
CX25840_DIF_ON = 0x80000400,
};
/*
* The defines below are used to set the chip video output settings
* in the generic mode that can be enabled by calling the subdevice
* init core op.
*
* The requested settings can be passed to the init core op as
* @val parameter and to the s_routing video op as @config parameter.
*
* For details please refer to the section 3.7 Video Output Formatting and
* to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core
* of the chip datasheet.
*/
#define CX25840_VCONFIG_FMT_SHIFT 0
#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0)
#define CX25840_VCONFIG_FMT_BT601 BIT(0)
#define CX25840_VCONFIG_FMT_BT656 BIT(1)
#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0)
#define CX25840_VCONFIG_FMT_VIP2 BIT(2)
#define CX25840_VCONFIG_RES_SHIFT 3
#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3)
#define CX25840_VCONFIG_RES_8BIT BIT(3)
#define CX25840_VCONFIG_RES_10BIT BIT(4)
#define CX25840_VCONFIG_VBIRAW_SHIFT 5
#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5)
#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5)
#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6)
#define CX25840_VCONFIG_ANCDATA_SHIFT 7
#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7)
#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7)
#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8)
#define CX25840_VCONFIG_TASKBIT_SHIFT 9
#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9)
#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9)
#define CX25840_VCONFIG_TASKBIT_ONE BIT(10)
#define CX25840_VCONFIG_ACTIVE_SHIFT 11
#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11)
#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11)
#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12)
#define CX25840_VCONFIG_VALID_SHIFT 13
#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13)
#define CX25840_VCONFIG_VALID_NORMAL BIT(13)
#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14)
#define CX25840_VCONFIG_HRESETW_SHIFT 15
#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15)
#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15)
#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16)
#define CX25840_VCONFIG_CLKGATE_SHIFT 17
#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17)
#define CX25840_VCONFIG_CLKGATE_NONE BIT(17)
#define CX25840_VCONFIG_CLKGATE_VALID BIT(18)
#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17)
#define CX25840_VCONFIG_DCMODE_SHIFT 19
#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19)
#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19)
#define CX25840_VCONFIG_DCMODE_BYTES BIT(20)
#define CX25840_VCONFIG_IDID0S_SHIFT 21
#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21)
#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21)
#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22)
#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23
#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23)
#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23)
#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24)
enum cx25840_audio_input {
/* Audio inputs: serial or In4-In8 */
CX25840_AUDIO_SERIAL,
CX25840_AUDIO4 = 4,
CX25840_AUDIO5,
CX25840_AUDIO6,
CX25840_AUDIO7,
CX25840_AUDIO8,
};
enum cx25840_io_pin {
CX25840_PIN_DVALID_PRGM0 = 0,
CX25840_PIN_FIELD_PRGM1,
CX25840_PIN_HRESET_PRGM2,
CX25840_PIN_VRESET_HCTL_PRGM3,
CX25840_PIN_IRQ_N_PRGM4,
CX25840_PIN_IR_TX_PRGM6,
CX25840_PIN_IR_RX_PRGM5,
CX25840_PIN_GPIO0_PRGM8,
CX25840_PIN_GPIO1_PRGM9,
CX25840_PIN_SA_SDIN, /* Alternate GP Input only */
CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */
CX25840_PIN_PLL_CLK_PRGM7,
CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */
};
enum cx25840_io_pad {
/* Output pads, these must match the actual chip register values */
CX25840_PAD_DEFAULT = 0,
CX25840_PAD_ACTIVE,
CX25840_PAD_VACTIVE,
CX25840_PAD_CBFLAG,
CX25840_PAD_VID_DATA_EXT0,
CX25840_PAD_VID_DATA_EXT1,
CX25840_PAD_GPO0,
CX25840_PAD_GPO1,
CX25840_PAD_GPO2,
CX25840_PAD_GPO3,
CX25840_PAD_IRQ_N,
CX25840_PAD_AC_SYNC,
CX25840_PAD_AC_SDOUT,
CX25840_PAD_PLL_CLK,
CX25840_PAD_VRESET,
CX25840_PAD_RESERVED,
/* Pads for PLL_CLK output only */
CX25840_PAD_XTI_X5_DLL,
CX25840_PAD_AUX_PLL,
CX25840_PAD_VID_PLL,
CX25840_PAD_XTI,
/* Input Pads */
CX25840_PAD_GPI0,
CX25840_PAD_GPI1,
CX25840_PAD_GPI2,
CX25840_PAD_GPI3,
};
enum cx25840_io_pin_strength {
CX25840_PIN_DRIVE_MEDIUM = 0,
CX25840_PIN_DRIVE_SLOW,
CX25840_PIN_DRIVE_FAST,
};
enum cx23885_io_pin {
CX23885_PIN_IR_RX_GPIO19,
CX23885_PIN_IR_TX_GPIO20,
CX23885_PIN_I2S_SDAT_GPIO21,
CX23885_PIN_I2S_WCLK_GPIO22,
CX23885_PIN_I2S_BCLK_GPIO23,
CX23885_PIN_IRQ_N_GPIO16,
};
enum cx23885_io_pad {
CX23885_PAD_IR_RX,
CX23885_PAD_GPIO19,
CX23885_PAD_IR_TX,
CX23885_PAD_GPIO20,
CX23885_PAD_I2S_SDAT,
CX23885_PAD_GPIO21,
CX23885_PAD_I2S_WCLK,
CX23885_PAD_GPIO22,
CX23885_PAD_I2S_BCLK,
CX23885_PAD_GPIO23,
CX23885_PAD_IRQ_N,
CX23885_PAD_GPIO16,
};
/*
* pvr150_workaround activates a workaround for a hardware bug that is
* present in Hauppauge PVR-150 (and possibly PVR-500) cards that have
* certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The
* audio autodetect fails on some channels for these models and the workaround
* is to select the audio standard explicitly. Many thanks to Hauppauge for
* providing this information.
*
* This platform data only needs to be supplied by the ivtv driver.
*/
struct cx25840_platform_data {
int pvr150_workaround;
};
#endif