| Current File : //proc/self/root/usr/src/linux-headers-6.8.0-60/arch/mips/include/asm/mach-loongson32/regs-mux.h |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
*
* Loongson 1 MUX Register Definitions.
*/
#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
#define __ASM_MACH_LOONGSON32_REGS_MUX_H
#define LS1X_MUX_REG(x) \
((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
#if defined(CONFIG_LOONGSON1_LS1B)
/* MUX CTRL0 Register Bits */
#define UART0_USE_PWM23 BIT(28)
#define UART0_USE_PWM01 BIT(27)
#define UART1_USE_LCD0_5_6_11 BIT(26)
#define I2C2_USE_CAN1 BIT(25)
#define I2C1_USE_CAN0 BIT(24)
#define NAND3_USE_UART5 BIT(23)
#define NAND3_USE_UART4 BIT(22)
#define NAND3_USE_UART1_DAT BIT(21)
#define NAND3_USE_UART1_CTS BIT(20)
#define NAND3_USE_PWM23 BIT(19)
#define NAND3_USE_PWM01 BIT(18)
#define NAND2_USE_UART5 BIT(17)
#define NAND2_USE_UART4 BIT(16)
#define NAND2_USE_UART1_DAT BIT(15)
#define NAND2_USE_UART1_CTS BIT(14)
#define NAND2_USE_PWM23 BIT(13)
#define NAND2_USE_PWM01 BIT(12)
#define NAND1_USE_UART5 BIT(11)
#define NAND1_USE_UART4 BIT(10)
#define NAND1_USE_UART1_DAT BIT(9)
#define NAND1_USE_UART1_CTS BIT(8)
#define NAND1_USE_PWM23 BIT(7)
#define NAND1_USE_PWM01 BIT(6)
#define GMAC1_USE_UART1 BIT(4)
#define GMAC1_USE_UART0 BIT(3)
#define LCD_USE_UART0_DAT BIT(2)
#define LCD_USE_UART15 BIT(1)
#define LCD_USE_UART0 BIT(0)
/* MUX CTRL1 Register Bits */
#define USB_RESET BIT(31)
#define SPI1_CS_USE_PWM01 BIT(24)
#define SPI1_USE_CAN BIT(23)
#define DISABLE_DDR_CONFSPACE BIT(20)
#define DDR32TO16EN BIT(16)
#define GMAC1_SHUT BIT(13)
#define GMAC0_SHUT BIT(12)
#define USB_SHUT BIT(11)
#define UART1_3_USE_CAN1 BIT(5)
#define UART1_2_USE_CAN0 BIT(4)
#define GMAC1_USE_TXCLK BIT(3)
#define GMAC0_USE_TXCLK BIT(2)
#define GMAC1_USE_PWM23 BIT(1)
#define GMAC0_USE_PWM01 BIT(0)
#elif defined(CONFIG_LOONGSON1_LS1C)
/* SHUT_CTRL Register Bits */
#define UART_SPLIT GENMASK(31, 30)
#define OUTPUT_CLK GENMASK(29, 26)
#define ADC_SHUT BIT(25)
#define SDIO_SHUT BIT(24)
#define DMA2_SHUT BIT(23)
#define DMA1_SHUT BIT(22)
#define DMA0_SHUT BIT(21)
#define SPI1_SHUT BIT(20)
#define SPI0_SHUT BIT(19)
#define I2C2_SHUT BIT(18)
#define I2C1_SHUT BIT(17)
#define I2C0_SHUT BIT(16)
#define AC97_SHUT BIT(15)
#define I2S_SHUT BIT(14)
#define UART3_SHUT BIT(13)
#define UART2_SHUT BIT(12)
#define UART1_SHUT BIT(11)
#define UART0_SHUT BIT(10)
#define CAN1_SHUT BIT(9)
#define CAN0_SHUT BIT(8)
#define ECC_SHUT BIT(7)
#define GMAC_SHUT BIT(6)
#define USBHOST_SHUT BIT(5)
#define USBOTG_SHUT BIT(4)
#define SDRAM_SHUT BIT(3)
#define SRAM_SHUT BIT(2)
#define CAM_SHUT BIT(1)
#define LCD_SHUT BIT(0)
#define UART_SPLIT_SHIFT 30
#define OUTPUT_CLK_SHIFT 26
/* MISC_CTRL Register Bits */
#define USBHOST_RSTN BIT(31)
#define PHY_INTF_SELI GENMASK(30, 28)
#define AC97_EN BIT(25)
#define SDIO_DMA_EN GENMASK(24, 23)
#define ADC_DMA_EN BIT(22)
#define SDIO_USE_SPI1 BIT(17)
#define SDIO_USE_SPI0 BIT(16)
#define SRAM_CTRL GENMASK(15, 0)
#define PHY_INTF_SELI_SHIFT 28
#define SDIO_DMA_EN_SHIFT 23
#define SRAM_CTRL_SHIFT 0
#define LS1X_CBUS_REG(n, x) \
((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
#define LS1X_CBUS_FIRST(n) LS1X_CBUS_REG(n, 0x00)
#define LS1X_CBUS_SECOND(n) LS1X_CBUS_REG(n, 0x10)
#define LS1X_CBUS_THIRD(n) LS1X_CBUS_REG(n, 0x20)
#define LS1X_CBUS_FOURTHT(n) LS1X_CBUS_REG(n, 0x30)
#define LS1X_CBUS_FIFTHT(n) LS1X_CBUS_REG(n, 0x40)
#endif
#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */