Current File : //proc/self/root/usr/src/linux-headers-6.8.0-59/include/sound/core.h
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef __SOUND_CORE_H
#define __SOUND_CORE_H

/*
 *  Main header file for the ALSA driver
 *  Copyright (c) 1994-2001 by Jaroslav Kysela <perex@perex.cz>
 */

#include <linux/device.h>
#include <linux/sched.h>		/* wake_up() */
#include <linux/mutex.h>		/* struct mutex */
#include <linux/rwsem.h>		/* struct rw_semaphore */
#include <linux/pm.h>			/* pm_message_t */
#include <linux/stringify.h>
#include <linux/printk.h>
#include <linux/xarray.h>

/* number of supported soundcards */
#ifdef CONFIG_SND_DYNAMIC_MINORS
#define SNDRV_CARDS CONFIG_SND_MAX_CARDS
#else
#define SNDRV_CARDS 8		/* don't change - minor numbers */
#endif

#define CONFIG_SND_MAJOR	116	/* standard configuration */

/* forward declarations */
struct pci_dev;
struct module;
struct completion;

/* device allocation stuff */

/* type of the object used in snd_device_*()
 * this also defines the calling order
 */
enum snd_device_type {
	SNDRV_DEV_LOWLEVEL,
	SNDRV_DEV_INFO,
	SNDRV_DEV_BUS,
	SNDRV_DEV_CODEC,
	SNDRV_DEV_PCM,
	SNDRV_DEV_COMPRESS,
	SNDRV_DEV_RAWMIDI,
	SNDRV_DEV_TIMER,
	SNDRV_DEV_SEQUENCER,
	SNDRV_DEV_HWDEP,
	SNDRV_DEV_JACK,
	SNDRV_DEV_CONTROL,	/* NOTE: this must be the last one */
};

enum snd_device_state {
	SNDRV_DEV_BUILD,
	SNDRV_DEV_REGISTERED,
	SNDRV_DEV_DISCONNECTED,
};

struct snd_device;

struct snd_device_ops {
	int (*dev_free)(struct snd_device *dev);
	int (*dev_register)(struct snd_device *dev);
	int (*dev_disconnect)(struct snd_device *dev);
};

struct snd_device {
	struct list_head list;		/* list of registered devices */
	struct snd_card *card;		/* card which holds this device */
	enum snd_device_state state;	/* state of the device */
	enum snd_device_type type;	/* device type */
	void *device_data;		/* device structure */
	const struct snd_device_ops *ops;	/* operations */
};

#define snd_device(n) list_entry(n, struct snd_device, list)

/* main structure for soundcard */

struct snd_card {
	int number;			/* number of soundcard (index to
								snd_cards) */

	char id[16];			/* id string of this card */
	char driver[16];		/* driver name */
	char shortname[32];		/* short name of this soundcard */
	char longname[80];		/* name of this soundcard */
	char irq_descr[32];		/* Interrupt description */
	char mixername[80];		/* mixer name */
	char components[128];		/* card components delimited with
								space */
	struct module *module;		/* top-level module */

	void *private_data;		/* private data for soundcard */
	void (*private_free) (struct snd_card *card); /* callback for freeing of
								private data */
	struct list_head devices;	/* devices */

	struct device *ctl_dev;		/* control device */
	unsigned int last_numid;	/* last used numeric ID */
	struct rw_semaphore controls_rwsem;	/* controls lock (list and values) */
	rwlock_t ctl_files_rwlock;	/* ctl_files list lock */
	int controls_count;		/* count of all controls */
	size_t user_ctl_alloc_size;	// current memory allocation by user controls.
	struct list_head controls;	/* all controls for this card */
	struct list_head ctl_files;	/* active control files */
#ifdef CONFIG_SND_CTL_FAST_LOOKUP
	struct xarray ctl_numids;	/* hash table for numids */
	struct xarray ctl_hash;		/* hash table for ctl id matching */
	bool ctl_hash_collision;	/* ctl_hash collision seen? */
#endif

	struct snd_info_entry *proc_root;	/* root for soundcard specific files */
	struct proc_dir_entry *proc_root_link;	/* number link to real id */

	struct list_head files_list;	/* all files associated to this card */
	struct snd_shutdown_f_ops *s_f_ops; /* file operations in the shutdown
								state */
	spinlock_t files_lock;		/* lock the files for this card */
	int shutdown;			/* this card is going down */
	struct completion *release_completion;
	struct device *dev;		/* device assigned to this card */
	struct device card_dev;		/* cardX object for sysfs */
	const struct attribute_group *dev_groups[4]; /* assigned sysfs attr */
	bool registered;		/* card_dev is registered? */
	bool managed;			/* managed via devres */
	bool releasing;			/* during card free process */
	int sync_irq;			/* assigned irq, used for PCM sync */
	wait_queue_head_t remove_sleep;

	size_t total_pcm_alloc_bytes;	/* total amount of allocated buffers */
	struct mutex memory_mutex;	/* protection for the above */
#ifdef CONFIG_SND_DEBUG
	struct dentry *debugfs_root;    /* debugfs root for card */
#endif

#ifdef CONFIG_PM
	unsigned int power_state;	/* power state */
	atomic_t power_ref;
	wait_queue_head_t power_sleep;
	wait_queue_head_t power_ref_sleep;
#endif

#if IS_ENABLED(CONFIG_SND_MIXER_OSS)
	struct snd_mixer_oss *mixer_oss;
	int mixer_oss_change_count;
#endif
};

#define dev_to_snd_card(p)	container_of(p, struct snd_card, card_dev)

#ifdef CONFIG_PM
static inline unsigned int snd_power_get_state(struct snd_card *card)
{
	return READ_ONCE(card->power_state);
}

static inline void snd_power_change_state(struct snd_card *card, unsigned int state)
{
	WRITE_ONCE(card->power_state, state);
	wake_up(&card->power_sleep);
}

/**
 * snd_power_ref - Take the reference count for power control
 * @card: sound card object
 *
 * The power_ref reference of the card is used for managing to block
 * the snd_power_sync_ref() operation.  This function increments the reference.
 * The counterpart snd_power_unref() has to be called appropriately later.
 */
static inline void snd_power_ref(struct snd_card *card)
{
	atomic_inc(&card->power_ref);
}

/**
 * snd_power_unref - Release the reference count for power control
 * @card: sound card object
 */
static inline void snd_power_unref(struct snd_card *card)
{
	if (atomic_dec_and_test(&card->power_ref))
		wake_up(&card->power_ref_sleep);
}

/**
 * snd_power_sync_ref - wait until the card power_ref is freed
 * @card: sound card object
 *
 * This function is used to synchronize with the pending power_ref being
 * released.
 */
static inline void snd_power_sync_ref(struct snd_card *card)
{
	wait_event(card->power_ref_sleep, !atomic_read(&card->power_ref));
}

/* init.c */
int snd_power_wait(struct snd_card *card);
int snd_power_ref_and_wait(struct snd_card *card);

#else /* ! CONFIG_PM */

static inline int snd_power_wait(struct snd_card *card) { return 0; }
static inline void snd_power_ref(struct snd_card *card) {}
static inline void snd_power_unref(struct snd_card *card) {}
static inline int snd_power_ref_and_wait(struct snd_card *card) { return 0; }
static inline void snd_power_sync_ref(struct snd_card *card) {}
#define snd_power_get_state(card)	({ (void)(card); SNDRV_CTL_POWER_D0; })
#define snd_power_change_state(card, state)	do { (void)(card); } while (0)

#endif /* CONFIG_PM */

struct snd_minor {
	int type;			/* SNDRV_DEVICE_TYPE_XXX */
	int card;			/* card number */
	int device;			/* device number */
	const struct file_operations *f_ops;	/* file operations */
	void *private_data;		/* private data for f_ops->open */
	struct device *dev;		/* device for sysfs */
	struct snd_card *card_ptr;	/* assigned card instance */
};

/* return a device pointer linked to each sound device as a parent */
static inline struct device *snd_card_get_device_link(struct snd_card *card)
{
	return card ? &card->card_dev : NULL;
}

/* sound.c */

extern int snd_major;
extern int snd_ecards_limit;
extern const struct class sound_class;
#ifdef CONFIG_SND_DEBUG
extern struct dentry *sound_debugfs_root;
#endif

void snd_request_card(int card);

int snd_device_alloc(struct device **dev_p, struct snd_card *card);

int snd_register_device(int type, struct snd_card *card, int dev,
			const struct file_operations *f_ops,
			void *private_data, struct device *device);
int snd_unregister_device(struct device *dev);
void *snd_lookup_minor_data(unsigned int minor, int type);

#ifdef CONFIG_SND_OSSEMUL
int snd_register_oss_device(int type, struct snd_card *card, int dev,
			    const struct file_operations *f_ops, void *private_data);
int snd_unregister_oss_device(int type, struct snd_card *card, int dev);
void *snd_lookup_oss_minor_data(unsigned int minor, int type);
#endif

int snd_minor_info_init(void);

/* sound_oss.c */

#ifdef CONFIG_SND_OSSEMUL
int snd_minor_info_oss_init(void);
#else
static inline int snd_minor_info_oss_init(void) { return 0; }
#endif

/* memory.c */

int copy_to_user_fromio(void __user *dst, const volatile void __iomem *src, size_t count);
int copy_from_user_toio(volatile void __iomem *dst, const void __user *src, size_t count);

/* init.c */

int snd_card_locked(int card);
#if IS_ENABLED(CONFIG_SND_MIXER_OSS)
#define SND_MIXER_OSS_NOTIFY_REGISTER	0
#define SND_MIXER_OSS_NOTIFY_DISCONNECT	1
#define SND_MIXER_OSS_NOTIFY_FREE	2
extern int (*snd_mixer_oss_notify_callback)(struct snd_card *card, int cmd);
#endif

int snd_card_new(struct device *parent, int idx, const char *xid,
		 struct module *module, int extra_size,
		 struct snd_card **card_ret);
int snd_devm_card_new(struct device *parent, int idx, const char *xid,
		      struct module *module, size_t extra_size,
		      struct snd_card **card_ret);

void snd_card_disconnect(struct snd_card *card);
void snd_card_disconnect_sync(struct snd_card *card);
void snd_card_free(struct snd_card *card);
void snd_card_free_when_closed(struct snd_card *card);
int snd_card_free_on_error(struct device *dev, int ret);
void snd_card_set_id(struct snd_card *card, const char *id);
int snd_card_register(struct snd_card *card);
int snd_card_info_init(void);
int snd_card_add_dev_attr(struct snd_card *card,
			  const struct attribute_group *group);
int snd_component_add(struct snd_card *card, const char *component);
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);

struct snd_card *snd_card_ref(int card);

/**
 * snd_card_unref - Unreference the card object
 * @card: the card object to unreference
 *
 * Call this function for the card object that was obtained via snd_card_ref()
 * or snd_lookup_minor_data().
 */
static inline void snd_card_unref(struct snd_card *card)
{
	put_device(&card->card_dev);
}

#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))

/* device.c */

int snd_device_new(struct snd_card *card, enum snd_device_type type,
		   void *device_data, const struct snd_device_ops *ops);
int snd_device_register(struct snd_card *card, void *device_data);
int snd_device_register_all(struct snd_card *card);
void snd_device_disconnect(struct snd_card *card, void *device_data);
void snd_device_disconnect_all(struct snd_card *card);
void snd_device_free(struct snd_card *card, void *device_data);
void snd_device_free_all(struct snd_card *card);
int snd_device_get_state(struct snd_card *card, void *device_data);

/* isadma.c */

#ifdef CONFIG_ISA_DMA_API
#define DMA_MODE_NO_ENABLE	0x0100

void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
void snd_dma_disable(unsigned long dma);
unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
int snd_devm_request_dma(struct device *dev, int dma, const char *name);
#endif

/* misc.c */
struct resource;
void release_and_free_resource(struct resource *res);

/* --- */

/* sound printk debug levels */
enum {
	SND_PR_ALWAYS,
	SND_PR_DEBUG,
	SND_PR_VERBOSE,
};

#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
__printf(4, 5)
void __snd_printk(unsigned int level, const char *file, int line,
		  const char *format, ...);
#else
#define __snd_printk(level, file, line, format, ...) \
	printk(format, ##__VA_ARGS__)
#endif

/**
 * snd_printk - printk wrapper
 * @fmt: format string
 *
 * Works like printk() but prints the file and the line of the caller
 * when configured with CONFIG_SND_VERBOSE_PRINTK.
 */
#define snd_printk(fmt, ...) \
	__snd_printk(0, __FILE__, __LINE__, fmt, ##__VA_ARGS__)

#ifdef CONFIG_SND_DEBUG
/**
 * snd_printd - debug printk
 * @fmt: format string
 *
 * Works like snd_printk() for debugging purposes.
 * Ignored when CONFIG_SND_DEBUG is not set.
 */
#define snd_printd(fmt, ...) \
	__snd_printk(1, __FILE__, __LINE__, fmt, ##__VA_ARGS__)
#define _snd_printd(level, fmt, ...) \
	__snd_printk(level, __FILE__, __LINE__, fmt, ##__VA_ARGS__)

/**
 * snd_BUG - give a BUG warning message and stack trace
 *
 * Calls WARN() if CONFIG_SND_DEBUG is set.
 * Ignored when CONFIG_SND_DEBUG is not set.
 */
#define snd_BUG()		WARN(1, "BUG?\n")

/**
 * snd_printd_ratelimit - Suppress high rates of output when
 * 			  CONFIG_SND_DEBUG is enabled.
 */
#define snd_printd_ratelimit() printk_ratelimit()

/**
 * snd_BUG_ON - debugging check macro
 * @cond: condition to evaluate
 *
 * Has the same behavior as WARN_ON when CONFIG_SND_DEBUG is set,
 * otherwise just evaluates the conditional and returns the value.
 */
#define snd_BUG_ON(cond)	WARN_ON((cond))

#else /* !CONFIG_SND_DEBUG */

__printf(1, 2)
static inline void snd_printd(const char *format, ...) {}
__printf(2, 3)
static inline void _snd_printd(int level, const char *format, ...) {}

#define snd_BUG()			do { } while (0)

#define snd_BUG_ON(condition) ({ \
	int __ret_warn_on = !!(condition); \
	unlikely(__ret_warn_on); \
})

static inline bool snd_printd_ratelimit(void) { return false; }

#endif /* CONFIG_SND_DEBUG */

#ifdef CONFIG_SND_DEBUG_VERBOSE
/**
 * snd_printdd - debug printk
 * @format: format string
 *
 * Works like snd_printk() for debugging purposes.
 * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
 */
#define snd_printdd(format, ...) \
	__snd_printk(2, __FILE__, __LINE__, format, ##__VA_ARGS__)
#else
__printf(1, 2)
static inline void snd_printdd(const char *format, ...) {}
#endif


#define SNDRV_OSS_VERSION         ((3<<16)|(8<<8)|(1<<4)|(0))	/* 3.8.1a */

/* for easier backward-porting */
#if IS_ENABLED(CONFIG_GAMEPORT)
#define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
#define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
#define gameport_get_port_data(gp) (gp)->port_data
#endif

/* PCI quirk list helper */
struct snd_pci_quirk {
	unsigned short subvendor;	/* PCI subvendor ID */
	unsigned short subdevice;	/* PCI subdevice ID */
	unsigned short subdevice_mask;	/* bitmask to match */
	int value;			/* value */
#ifdef CONFIG_SND_DEBUG_VERBOSE
	const char *name;		/* name of the device (optional) */
#endif
};

#define _SND_PCI_QUIRK_ID_MASK(vend, mask, dev)	\
	.subvendor = (vend), .subdevice = (dev), .subdevice_mask = (mask)
#define _SND_PCI_QUIRK_ID(vend, dev) \
	_SND_PCI_QUIRK_ID_MASK(vend, 0xffff, dev)
#define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)}
#ifdef CONFIG_SND_DEBUG_VERBOSE
#define SND_PCI_QUIRK(vend,dev,xname,val) \
	{_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)}
#define SND_PCI_QUIRK_VENDOR(vend, xname, val)			\
	{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val), .name = (xname)}
#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val)			\
	{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev),			\
			.value = (val), .name = (xname)}
#define snd_pci_quirk_name(q)	((q)->name)
#else
#define SND_PCI_QUIRK(vend,dev,xname,val) \
	{_SND_PCI_QUIRK_ID(vend, dev), .value = (val)}
#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val)			\
	{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), .value = (val)}
#define SND_PCI_QUIRK_VENDOR(vend, xname, val)			\
	{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val)}
#define snd_pci_quirk_name(q)	""
#endif

#ifdef CONFIG_PCI
const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list);

const struct snd_pci_quirk *
snd_pci_quirk_lookup_id(u16 vendor, u16 device,
			const struct snd_pci_quirk *list);
#else
static inline const struct snd_pci_quirk *
snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list)
{
	return NULL;
}

static inline const struct snd_pci_quirk *
snd_pci_quirk_lookup_id(u16 vendor, u16 device,
			const struct snd_pci_quirk *list)
{
	return NULL;
}
#endif

/* async signal helpers */
struct snd_fasync;

int snd_fasync_helper(int fd, struct file *file, int on,
		      struct snd_fasync **fasyncp);
void snd_kill_fasync(struct snd_fasync *fasync, int signal, int poll);
void snd_fasync_free(struct snd_fasync *fasync);

#endif /* __SOUND_CORE_H */
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!