| Current File : //proc/self/root/usr/share/webmin/net/debian-linux-lib.pl |
# debian-linux-lib.pl
# Networking functions for Debian linux >= 2.2 (aka. potato)
# Really, this won't work with releases prior to 2.2, don't even try it.
#
# Rene Mayrhofer, July 2000
# Some code has been taken from redhat-linux-lib.pl
$network_interfaces_config = '/etc/network/interfaces';
$modules_config = '/etc/modprobe.d/arch/i386';
if (!-d $modules_config) {
($modules_config) = glob('/etc/modprobe.d/arch/*');
}
$network_interfaces = '/proc/net/dev';
$sysctl_config = "/etc/sysctl.conf";
do 'linux-lib.pl';
# boot_interfaces()
# Returns a list of interfaces brought up at boot time
sub boot_interfaces
{
my @ifaces = &get_interface_defs();
my @autos = &get_auto_defs();
my @rv;
my %v6map;
foreach $iface (@ifaces) {
my ($name, $addrfam, $method, $options, $file, $lnum) = @$iface;
if ($addrfam eq 'inet') {
# IPv4 interface .. parse and add to list
my $cfg = { };
$cfg->{'fullname'} = $name;
if ($cfg->{'fullname'} =~ /(\S+):(\d+)/) {
$cfg->{'name'} = $1;
$cfg->{'virtual'} = $2;
}
else {
$cfg->{'name'} = $cfg->{'fullname'};
}
if ($cfg->{'fullname'} =~ /^br(\d+)$/) {
$cfg->{'bridge'} = 1;
}
if ($gconfig{'os_version'} >= 3 || scalar(@autos)) {
$cfg->{'up'} = &indexof($name, @autos) >= 0;
}
else {
$cfg->{'up'} = 1;
}
foreach $option (@$options) {
my ($param, $value) = @$option;
if ($param eq 'noauto') {
$cfg->{'up'} = 0;
}
elsif($param eq 'up') {
$cfg->{"partner"} =
&get_teaming_partner($cfg->{'name'}, $value);
%options = &get_module_defs($name);
$cfg->{'mode'} = $options{'mode'};
$cfg->{'miimon'} = $options{'miimon'};
$cfg->{'downdelay'} = $options{'downdelay'};
$cfg->{'updelay'} = $options{'updelay'};
$cfg->{'primary'} = $options{'primary'};
}
elsif($param =~ /^bond[_\-](mode|miimon|downdelay|updelay|primary)$/) {
$cfg->{$1} = $value;
}
elsif($param eq 'slaves') {
$cfg->{'partner'} = $value;
}
elsif($param eq 'hwaddress' || $param eq 'hwaddr') {
local @v = split(/\s+/, $value);
$cfg->{'ether_type'} = $v[0];
$cfg->{'ether'} = $v[1];
}
elsif ($param eq 'bridge_ports') {
$cfg->{'bridgeto'} = $value;
}
elsif ($param eq 'bridge_stp') {
$cfg->{'bridgestp'} = $value;
}
elsif ($param eq 'bridge_fd') {
$cfg->{'bridgefd'} = $value;
}
elsif ($param eq 'bridge_waitport') {
$cfg->{'bridgewait'} = $value;
}
elsif ($param eq 'pre-up' &&
$value =~ /brctl\s+addif\s+br\d+\s+(\S+)/) {
$cfg->{'bridgeto'} = $1;
}
else {
$cfg->{$param} = $value;
}
}
if ($cfg->{'address'} =~ /^(\S+)\/(\d+)$/) {
$cfg->{'address'} = $1;
$cfg->{'netmask'} = &prefix_to_mask($2);
}
$cfg->{'dhcp'} = ($method eq 'dhcp');
$cfg->{'bootp'} = ($method eq 'bootp');
$cfg->{'edit'} = ($cfg->{'name'} !~ /^ppp|lo/);
$cfg->{'index'} = scalar(@rv);
$cfg->{'file'} = $file;
$cfg->{'line'} = $lnum;
push(@rv, $cfg);
}
elsif ($addrfam eq "inet6") {
# IPv6 interface .. add to matching v4 block
my $v6cfg = { 'address6' => [ ],
'netmask6' => [ ] };
foreach $option (@$options) {
my ($param, $value) = @$option;
if ($param eq "address") {
$value =~ s/\s+dev\s+(\S+)//;
if ($value =~ /^(\S+)\/(\d+)$/) {
push(@{$v6cfg->{'address6'}}, $1);
push(@{$v6cfg->{'netmask6'}}, $2);
}
else {
push(@{$v6cfg->{'address6'}}, $value);
}
}
elsif ($param eq "netmask") {
push(@{$v6cfg->{'netmask6'}}, $value);
}
elsif ($param eq "gateway") {
$v6cfg->{'gateway6'} = $value;
}
elsif ($param eq "up" &&
$value =~ /ifconfig\s+(\S+)\s+inet6\s+add\s+([a-f0-9:]+)\/(\d+)/ &&
$1 eq $name) {
# Additional v6 address with ifconfig command,
# like :
# ifconfig eth0 inet6 add 2607:f3:aaab:3::10/64
push(@{$v6cfg->{'address6'}}, $2);
push(@{$v6cfg->{'netmask6'}}, $3);
}
elsif ($param eq "up" &&
$value =~ /ip\s+addr\s+add\s+([a-f0-9:]+)\/(\d+)\s+dev\s+(\S+)/ &&
$3 eq $name) {
# Additional v6 address with ip command, like :
# ip addr add 2607:f3:aaab:3::10/64 dev eth0
push(@{$v6cfg->{'address6'}}, $1);
push(@{$v6cfg->{'netmask6'}}, $2);
}
}
if ($method eq "manual" && !@{$v6cfg->{'address6'}}) {
$v6cfg->{'auto6'} = 1;
}
$v6map{$name} = $v6cfg;
}
}
# Merge in v6 interface settings
foreach my $iface (@rv) {
my $v6cfg = $v6map{$iface->{'fullname'}};
if ($v6cfg) {
foreach my $k (keys %$v6cfg) {
$iface->{$k} = $v6cfg->{$k};
}
}
}
return @rv;
}
# save_interface(&details)
# Create or update a boot-time interface
sub save_interface
{
my $cfg = $_[0];
my $name = $cfg->{'virtual'} ne "" ? $cfg->{'name'}.":".$cfg->{'virtual'}
: $cfg->{'name'};
my @options;
my $method;
my @modules_var;
if ($cfg->{'dhcp'} == 1) {
$method = 'dhcp';
}
elsif ($cfg->{'bootp'} == 1) {
$method = 'bootp';
}
elsif ($cfg->{'address'}) {
$method = 'static';
push(@options, ['address', $cfg->{'address'}]);
push(@options, ['netmask', $cfg->{'netmask'}]);
push(@options, ['broadcast', $cfg->{'broadcast'}])
if ($cfg->{'broadcast'});
my ($ip1, $ip2, $ip3, $ip4) = split(/\./, $cfg->{'address'});
my ($nm1, $nm2, $nm3, $nm4) = split(/\./, $cfg->{'netmask'});
if ($cfg->{'address'} && $cfg->{'netmask'}) {
my $network = sprintf "%d.%d.%d.%d",
($ip1 & int($nm1))&0xff,
($ip2 & int($nm2))&0xff,
($ip3 & int($nm3))&0xff,
($ip4 & int($nm4))&0xff;
push(@options, ['network', $network]);
}
if ($cfg->{'mtu'}) {
push(@options, ['mtu', $cfg->{'mtu'}]);
}
}
else {
$method = 'manual';
}
my @autos = get_auto_defs();
my $amode = $gconfig{'os_version'} > 3 || scalar(@autos);
if (!$cfg->{'up'} && !$amode) { push(@options, ['noauto', '']); }
if ($cfg->{'ether'}) {
push(@options, [ 'hwaddress',
($cfg->{'ether_type'} || 'ether').' '.
$cfg->{'ether'} ]);
}
if ($cfg->{'bridge'}) {
&has_command("brctl") || &error("Bridges cannot be created unless the ".
"brctl command is installed");
if ($cfg->{'bridgeto'}) {
push(@options, [ 'bridge_ports', $cfg->{'bridgeto'} ]);
}
else {
push(@options, [ 'pre-up', 'brctl addbr '.$name ]);
}
if ($cfg->{'bridgestp'}) {
push(@options, [ 'bridge_stp', $cfg->{'bridgestp'} ]);
}
if ($cfg->{'bridgefd'}) {
push(@options, [ 'bridge_fd', $cfg->{'bridgefd'} ]);
}
if ($cfg->{'bridgewait'}) {
push(@options, [ 'bridge_waitport', $cfg->{'bridgewait'} ]);
}
}
# Set bonding parameters
if(($cfg->{'bond'} == 1) && ($gconfig{'os_version'} >= 5)) {
push(@options, [&bonding_option('mode').' '.$cfg->{'mode'}]);
push(@options, [&bonding_option('miimon').' '.$cfg->{'miimon'}]) if ($cfg->{'miimon'});
push(@options, [&bonding_option('updelay').' '.$cfg->{'updelay'}]) if ($cfg->{'updelay'});
push(@options, [&bonding_option('downdelay').' '.$cfg->{'downdelay'}]) if ($cfg->{'downdelay'});
push(@options, [&bonding_option('primary').' '.$cfg->{'primary'}]) if ($cfg->{'primary'});
push(@options, ['slaves '.$cfg->{'partner'}]);
}
elsif ($cfg->{'bond'} == 1) {
push(@options, ['up', '/sbin/ifenslave '.$cfg->{'name'}." ".
$cfg->{'partner'}]);
push(@options, ['down', '/sbin/ifenslave -d '.$cfg->{'name'}." ".
$cfg->{'partner'}]);
}
# Set specific lines for vlan tagging
if(($cfg->{'vlan'} == 1) && ($gconfig{'os_version'} < 5)) {
push(@options, ['pre-up', 'vconfig add '.$cfg->{'physical'}.' '.
$cfg->{'vlanid'}]);
push(@options, ['post-down', 'vconfig rem '.$cfg->{'physical'}.' '.
$cfg->{'vlanid'}]);
if ($gconfig{'os_version'} >= 5) {
push(@options, ['vlan-raw-device', $cfg->{'physical'}]);
}
}
if(($cfg->{'vlan'} == 1) && ($cfg->{'mtu'})) {
if (&has_command("ip")) {
push(@options, ['pre-up', 'ip link set mtu '.$cfg->{'mtu'}.' dev '.$cfg->{'physical'}]);
}
else {
push(@options, ['pre-up', '/sbin/ifconfig '.$cfg->{'physical'}.' mtu '.$cfg->{'mtu'}]);
}
}
# Find the existing interface section
my @ifaces = get_interface_defs();
my $found;
my $found6;
foreach $iface (@ifaces) {
local $address;
foreach my $opt (@{$iface->[3]}) {
if($opt->[0] eq 'address'){
$address = $opt->[1];
last;
}
}
if ($iface->[0] eq $cfg->{'fullname'} && $iface->[1] eq 'inet') {
# Found interface to change
$found = $iface->[4];
foreach my $o (@{$iface->[3]}) {
if ($o->[0] eq 'gateway' ||
$o->[0] eq 'pre-up' && $o->[1] =~ /brctl/ ||
$o->[0] =~ /^(pre-)?up$/ && $o->[1] =~ /ip\s+route/ ||
$o->[0] eq 'post-up') {
push(@options, $o);
}
}
}
if ($iface->[0] eq $cfg->{'fullname'} && $iface->[1] eq 'inet6') {
# Found IPv6 block
$found6 = $iface->[4];
}
}
# Remove any duplicate options
my %done;
@options = grep { !$done{$_->[0],$_->[1]}++ } @options;
if (!$found) {
# Add a new interface section
if ($in{'vlan'} == 1) {
&new_interface_def($cfg->{'physical'}.'.'.$cfg->{'vlanid'},
'inet', $method, \@options);
}
else {
&new_interface_def($cfg->{'fullname'},
'inet', $method, \@options);
}
if ($cfg->{'bond'} == 1 && $gconfig{'os_version'} < 5) {
&new_module_def($cfg->{'fullname'}, $cfg->{'mode'},
$cfg->{'miimon'}, $cfg->{'downdelay'},
$cfg->{'updelay'});
}
}
else {
# Update existing section
if($in{'vlan'} == 1) {
&modify_interface_def($cfg->{'physical'}.'.'.$cfg->{'vlanid'},
'inet', $method, \@options, 0, $found);
}
else {
&modify_interface_def($cfg->{'fullname'},
'inet', $method, \@options, 0, $found);
}
if ($cfg->{'bond'} == 1 && $gconfig{'os_version'} < 5) {
&modify_module_def($cfg->{'fullname'}, 0, $cfg->{'mode'},
$cfg->{'miimon'}, $cfg->{'downdelay'},
$cfg->{'updelay'});
}
}
# Create IPv6 options
my @options6;
my @address6 = @{$cfg->{'address6'}};
my @netmask6 = @{$cfg->{'netmask6'}};
if (@address6) {
push(@options6, [ "address", shift(@address6) ]);
push(@options6, [ "netmask", shift(@netmask6) ]);
}
while(@address6) {
my $a = shift(@address6);
my $n = shift(@netmask6);
if (&has_command("ip")) {
push(@options6, [ "up", "ip addr add $a/$n dev $cfg->{'fullname'}" ]);
}
else {
push(@options6, [ "up", "ifconfig $cfg->{'fullname'} inet6 add $a/$n" ]);
}
}
if ($cfg->{'gateway6'}) {
push(@options6, [ "gateway", $cfg->{'gateway6'} ]);
}
# Add, update or delete IPv6 interface
my $method = $cfg->{'auto6'} ? "manual" : "static";
if (!$found6 && @options6) {
# Need to add IPv6 block
&new_interface_def($cfg->{'fullname'},
'inet6', $method, \@options6, $found);
}
elsif ($found6 && @options6) {
# Need to update IPv6 block
&modify_interface_def($cfg->{'fullname'},
'inet6', $method, \@options6, 0, $found6);
}
elsif ($found6 && !@options6) {
# Need to delete IPv6 block
&delete_interface_def($cfg->{'fullname'}, 'inet6', $found6);
}
# Set auto option to include this interface, or not
if ($amode) {
if ($cfg->{'up'}) {
if($in{'vlan'} == 1) {
@autos = &unique(@autos, $cfg->{'physical'}.'.'.
$cfg->{'vlanid'});
}
else {
@autos = &unique(@autos, $cfg->{'fullname'});
}
}
else {
@autos = grep { $_ ne $cfg->{'fullname'} } @autos;
}
&modify_auto_defs(@autos);
}
}
# Modifies a entry in /etc/modprobe.d/arch/i386 that concerns
# to the interface mentioned
# modify_module_def(name, delete, mode, miimon, downdelay, updelay)
sub modify_module_def
{
return if (!$modules_config);
my ($name, $delete, $mode, $miimon, $downdelay, $updelay) = @_;
my $modify_block = 0;
# make a backup copy
©_source_dest($modules_config, "$modules_config~");
local *OLDCFGFILE, *NEWCFGFILE;
&open_readfile(OLDCFGFILE, "$modules_config~") ||
error("Unable to open $modules_config");
&lock_file($network_interfaces_config);
&open_tempfile(NEWCFGFILE, "> $modules_config", 1) ||
error("Unable to open $modules_config");
while (defined ($line=<OLDCFGFILE>)) {
chomp($line);
@splitted_line = split(" ", $line);
if($splitted_line[0] eq 'alias' && $splitted_line[1] eq $name) {
# Found start of block we are changing
$modify_block = 1;
if (!$delete) {
&print_tempfile(NEWCFGFILE, $line . "\n");
}
} elsif ($splitted_line[0] eq 'alias' && !($splitted_line[1] eq $name)){
# Found start of another block
$modify_block = 0;
}
# if $delete == 1; write nothing
if($modify_block == 1 && $splitted_line[0] eq "options" && $delete != 1) {
$options_line = "options bonding ";
for($i = 2; $i < scalar(@splitted_line); $i++){
($key, $value) = split("=", $splitted_line[$i]);
if($key eq "mode") {
$options_line .= "mode=" . $mode . " ";
} elsif($key eq "miimon") {
$options_line .= "miimon=" . $miimon . " ";
} elsif($key eq "downdelay") {
$options_line .= "downdelay=" . $downdelay . " ";
} elsif($key eq "updelay") {
$options_line .= "updelay=" . $updelay . " ";
} else {
$options_line .= $key . "=" . $value . " ";
}
}
chop($options_line);
&print_tempfile(NEWCFGFILE, $options_line . "\n");
$modify_block == 0;
} elsif($modify_block == 0) {
&print_tempfile(NEWCFGFILE, $line . "\n");
}
}
&close_tempfile(NEWCFGFILE);
&unlock_file($modules_config);
}
# Deletes an the module concerning entry
# delete_module_def(name) 1 for deleting operation
sub delete_module_def
{
my ($name) = @_;
modify_interface_def($name, 1);
}
# get_module_defs(device)
# Returns the modul options form /etc/modprobe.d/arch/i386
# for a special device
# Return hash: ($mode, $miimon, $downdelay, $updelay)
sub get_module_defs
{
return ( ) if (!$modules_config);
local *CFGFILE;
my($device) = @_;
my %ret;
&open_readfile(CFGFILE, $modules_config) ||
error("Unable to open $modules_config");
$line = <CFGFILE>;
while(defined($line)){
chomp($line);
@params = split(" ", $line);
# Search for an entry concerning to the device
if($params[0] eq "alias" && $params[1] eq $device){
$line = <CFGFILE>;
chomp $line;
@params = split(" ", $line);
# Check if it is an options line
if($params[0] eq "options" && $params[1] eq "bonding") {
for($i = 2; $i < scalar(@params); $i++){
($key, $value) = split("=", $params[$i]);
$ret{$key} = $value;
}
}
}
$line = <CFGFILE>;
}
return %ret;
}
# creates a new entry for in the modules file
# Parameters should be (name, mode, miimon, downdelay, updelay)
sub new_module_def
{
local ($name, $mode, $miimon, $downdelay, $updelay) = @_;
return if (!$modules_config);
©_source_dest($modules_config, "$modules_config~");
local *CFGFILE;
&open_lock_tempfile(CFGFILE, ">> $modules_config") ||
error("Unable to open $modules_config");
&print_tempfile(CFGFILE, "alias " . $name . " bonding");
&print_tempfile(CFGFILE, "\noptions bonding");
if($mode ne '') {
&print_tempfile(CFGFILE, " mode=" . $mode);
}
if($miimon ne '') {
&print_tempfile(CFGFILE, " miimon=" . $miimon);
}
if($downdelay ne '') {
&print_tempfile(CFGFILE, " downdelay=" . $downdelay);
}
if($updelay ne '') {
&print_tempfile(CFGFILE, " updelay=" . $updelay);
}
# Add Newline
&print_tempfile(CFGFILE, "\n");
&close_tempfile(CFGFILE);
}
# delete_interface(&details)
# Delete a boot-time interface
sub delete_interface
{
my $cfg = $_[0];
&delete_interface_def($cfg->{'fullname'}, 'inet', $cfg->{'file'});
if (@{$cfg->{'address6'}}) {
&delete_interface_def($cfg->{'fullname'}, 'inet6', $cfg->{'file'});
}
my @autos = get_auto_defs();
if ($gconfig{'os_version'} >= 3 || scalar(@autos)) {
@autos = grep { $_ ne $cfg->{'fullname'} } @autos;
&modify_auto_defs(@autos);
}
}
# can_edit(what)
# Can some boot-time interface parameter be edited?
sub can_edit
{
my ($what) = @_;
return 1;
}
sub can_broadcast_def
{
return 1;
}
# valid_boot_address(address)
# Is some address valid for a bootup interface
sub valid_boot_address
{
return &check_ipaddress_any($_[0]);
}
# get_hostname()
# Returns the saved hostname
sub get_hostname
{
local $hn = &read_file_contents("/etc/hostname");
$hn =~ s/\r|\n//g;
if ($hn) {
return $hn;
}
return &get_system_hostname();
}
# save_hostname(name)
# Update the system's saved and live hostname
sub save_hostname
{
my ($hostname) = @_;
&system_logged("hostname ".quotemeta($hostname)." >/dev/null 2>&1");
foreach my $f ("/etc/hostname", "/etc/HOSTNAME", "/etc/mailname") {
if (-r $f) {
&open_lock_tempfile(HOST, ">$f");
&print_tempfile(HOST, $hostname,"\n");
&close_tempfile(HOST);
}
}
# Use the hostnamectl command as well
if (&has_command("hostnamectl")) {
&system_logged("hostnamectl set-hostname ".quotemeta($hostname).
" >/dev/null 2>&1");
}
&get_system_hostname(undef, undef, 2); # clear cache
}
# get_domainname()
sub get_domainname
{
local $d;
&execute_command("domainname", undef, \$d, undef);
chop($d);
return $d;
}
# save_domainname(domain)
sub save_domainname
{
my ($domain) = @_;
&execute_command("domainname ".quotemeta($domain));
}
sub routing_config_files
{
my @defs = &get_interface_defs();
my @files = &unique(map { $_->[4] } @defs);
return ( @files, $sysctl_config );
}
sub network_config_files
{
return ( "/etc/hostname", "/etc/HOSTNAME", "/etc/mailname" );
}
# show default router and device
sub routing_input
{
local ($addr, $router) = &get_default_gateway();
local ($addr6, $router6) = &get_default_ipv6_gateway();
local @ifaces = grep { $_->[1] eq 'inet' && $_->[0] ne 'lo' }
&get_interface_defs();
local @ifaces6 = grep { $_->[1] eq 'inet6' && $_->[0] ne 'lo' }
&get_interface_defs();
# Show default gateway
print &ui_table_row($text{'routes_default'},
&ui_radio("gateway_def", $addr ? 0 : 1,
[ [ 1, $text{'routes_none'} ],
[ 0, $text{'routes_gateway'}." ".
&ui_textbox("gateway", $addr, 15)." ".
&ui_select("gatewaydev", $router,
[ map { $_->[0] } @ifaces ]) ] ]));
if (@ifaces6) {
# Show default IPv6 gateway
print &ui_table_row($text{'routes_default6'},
&ui_radio("gateway6_def", $addr6 ? 0 : 1,
[ [ 1, $text{'routes_none'} ],
[ 0, $text{'routes_gateway'}." ".
&ui_textbox("gateway6", $addr6, 30)." ".
&ui_select("gatewaydev6", $router6,
[ map { $_->[0] } @ifaces6 ]) ] ]));
}
# Act as router?
local %sysctl;
&read_env_file($sysctl_config, \%sysctl);
print &ui_table_row($text{'routes_forward'},
&ui_yesno_radio("forward",
$sysctl{'net.ipv4.ip_forward'} ? 1 : 0));
# Get static routes
local ($d, @st, @hr);
foreach $d (@ifaces) {
local ($name, $addrfam, $method, $options) = @$d;
local $o;
local $onum = -1;
foreach $o (@$options) {
$onum++;
next if ($o->[0] ne "up");
if ($o->[1] =~ /^ip\s+route\s+add\s+([0-9\.]+)\/(\d+)\s+dev\s+(\S+)/) {
push(@hr, [ $name, $1, &prefix_to_mask($2) ]);
}
elsif ($o->[1] =~ /^ip\s+route\s+add\s+([0-9\.]+)\/(\d+)\s+via\s+(\S+)/) {
push(@st, [ $name, $1, &prefix_to_mask($2), $3 ]);
}
}
}
# Show static routes via gateways
my @table;
for($i=0; $i<=@st; $i++) {
local $st = $st[$i];
push(@table, [ &ui_textbox("dev_$i", $st->[0], 6),
&ui_textbox("net_$i", $st->[1], 15),
&ui_textbox("netmask_$i", $st->[2], 15),
&ui_textbox("gw_$i", $st->[3], 15), ]);
}
print &ui_table_row($text{'routes_static'},
&ui_columns_table([ $text{'routes_ifc'}, $text{'routes_net'},
$text{'routes_mask'}, $text{'routes_gateway'} ],
undef, \@table, undef, 1));
# Show static host routes
my @table;
for($i=0; $i<=@hr; $i++) {
local $st = $hr[$i];
push(@table, [ &ui_textbox("ldev_$i", $st->[0], 6),
&ui_textbox("lnet_$i", $st->[1], 15),
&ui_textbox("lnetmask_$i", $st->[2], 15) ]);
}
print &ui_table_row($text{'routes_local'},
&ui_columns_table([ $text{'routes_ifc'}, $text{'routes_net'},
$text{'routes_mask'} ],
undef, \@table, undef, 1));
}
sub parse_routing
{
# Save IPv4 address
local ($dev, $gw);
if (!$in{'gateway_def'}) {
&check_ipaddress($in{'gateway'}) ||
&error(&text('routes_egateway', &html_escape($in{'gateway'})));
$gw = $in{'gateway'};
$dev = $in{'gatewaydev'};
}
&set_default_gateway($gw, $dev);
# Save IPv6 address
local @ifaces6 = grep { $_->[1] eq 'inet6' && $_->[0] ne 'lo' }
&get_interface_defs();
if (@ifaces6) {
local ($dev6, $gw6);
if (!$in{'gateway6_def'}) {
&check_ip6address($in{'gateway6'}) ||
&error(&text('routes_egateway6', &html_escape($in{'gateway6'})));
$gw6 = $in{'gateway6'};
$dev6 = $in{'gatewaydev6'};
}
&set_default_ipv6_gateway($gw6, $dev6);
}
# Parse static and local routes
local %st;
local $i;
local $dev;
for($i=0; defined($dev = $in{"dev_$i"}); $i++) {
next if (!$dev);
local $net = $in{"net_$i"};
local $netmask = $in{"netmask_$i"};
local $gw = $in{"gw_$i"};
$dev =~ /^\S+$/ || &error(&text('routes_edevice', &html_escape($dev)));
&to_ipaddress($net) || &error(&text('routes_enet', &html_escape($net)));
&check_ipaddress_any($netmask) ||
&error(&text('routes_emask', &html_escape($netmask)));
&to_ipaddress($gw) || &error(&text('routes_egateway', &html_escape($gw)));
local $prefix = &mask_to_prefix($netmask);
push(@{$st{$dev}}, [ "up", "ip route add $net/$prefix via $gw" ]);
}
local %hr;
for($i=0; defined($dev = $in{"ldev_$i"}); $i++) {
local $net = $in{"lnet_$i"};
local $netmask = $in{"lnetmask_$i"};
next if (!$dev && !$net);
$dev =~ /^\S+$/ || &error(&text('routes_edevice', &html_escape($dev)));
&to_ipaddress($net) ||
$net =~ /^(\S+)\/(\d+)$/ && &to_ipaddress("$1") ||
&error(&text('routes_enet', &html_escape($net)));
&check_ipaddress_any($netmask) ||
&error(&text('routes_emask', &html_escape($netmask)));
local $prefix = &mask_to_prefix($netmask);
push(@{$hr{$dev}}, [ "up", "ip route add $net/$prefix dev $dev" ]);
}
# Replace old routing directives
local @ifaces = &get_interface_defs();
foreach $iface (@ifaces) {
local @o = @{$iface->[3]};
@o = grep { $_->[0] ne "up" ||
$_->[1] !~ /^ip\s+route\s+add/ } @o;
push(@o, @{$st{$iface->[0]}});
push(@o, @{$hr{$iface->[0]}});
$iface->[3] = \@o;
&modify_interface_def($iface->[0], $iface->[1], $iface->[2],
$iface->[3], 0);
}
# Save routing flag
local %sysctl;
&lock_file($sysctl_config);
&read_env_file($sysctl_config, \%sysctl);
$sysctl{'net.ipv4.ip_forward'} = $in{'forward'};
&write_env_file($sysctl_config, \%sysctl);
&unlock_file($sysctl_config);
}
###############################################################################
# helper functions for file-internal use
# gets a list of interface definitions (including their options) from the
# central config file
# the returned list is an array whose contents are tupels of
# (name, addrfam, method, options, file, line) with
# name the interface name (e.g. eth0)
# addrfam the address family (e.g. inet, inet6)
# method the address activation method (e.g. static, dhcp, loopback)
# options is a list of (param, value) pairs
# file the file this interface was read from
# line the line number in the file
sub get_interface_defs
{
my ($file, $done) = @_;
$file ||= $network_interfaces_config;
$done ||= { };
return ( ) if ($done->{$file}++);
my $fh;
my @ret;
open($fh, $file) || return ();
# read the file line by line
my $line = <$fh>;
my $lnum = 0;
my $err;
while (defined $line) {
last if ($err);
chomp($line);
# skip comments
if ($line =~ /^\s*#/ || $line =~ /^\s*$/) {
$line = <$fh>;
$lnum++;
next;
}
if ($line =~ /^\s*auto/) {
# skip auto stanzas
$line = <$fh>;
$lnum++;
while(defined($line) && $line !~ /^\s*(iface|mapping|auto|source|allow-hotplug)/) {
$line = <$fh>;
$lnum++;
next;
}
}
elsif ($line =~ /^\s*mapping/) {
# skip mapping stanzas
$line = <$fh>;
$lnum++;
while(defined($line) && $line !~ /^\s*(iface|mapping|auto|source|allow-hotplug)/) {
$line = <$fh>;
$lnum++;
next;
}
}
elsif ($line =~ /^\s*(source|source-directory)\s+(\S+)/) {
# Expand includes
$line = <$fh>;
$lnum++;
my ($dir, $src) = ($1, $2);
my @srcs;
if ($dir eq "source-directory") {
opendir(SRCDIR, $src);
@srcs = grep { /^[a-zA-Z0-9_-]+$/ } readdir(SRCDIR);
closedir(SRCDIR);
@srcs = map { "$src/$_" } @srcs
if (@srcs);
}
else {
@srcs = glob($src);
}
foreach $src (@srcs) {
my @inc = &get_interface_defs($src, $done);
push(@ret, @inc);
}
}
elsif ($line =~ /^\s*allow-hotplug/) {
# Skip hotplug lines
$line = <$fh>;
$lnum++;
}
elsif (my ($name, $addrfam, $method) = ($line =~ /^\s*iface\s+(\S+)\s+(\S+)\s+(\S+)\s*$/) ) {
# only lines starting with "iface" are expected here
my @iface_options;
# now read everything until the next iface definition
$line = <$fh>;
$lnum++;
while (defined $line && ! ($line =~ /^\s*(iface|mapping|auto|source|allow-hotplug)/)) {
# skip comments and empty lines
if ($line =~ /^\s*#/ || $line =~ /^\s*$/) {
$line = <$fh>;
$lnum++;
next;
}
my ($param, $value);
if ( ($param, $value) = ($line =~ /^\s*(\S+)\s+(.*)\s*$/) ) {
push(@iface_options, [$param, $value]);
}
elsif ( ($param) = ($line =~ /^\s*(\S+)\s*$/) ) {
push(@iface_options, [$param, '']);
}
else {
error("Error in option line: '$line' invalid");
}
$line = <$fh>;
$lnum++;
}
push(@ret, [$name, $addrfam, $method, \@iface_options,
$file, $lnum]);
}
else {
$err++;
error("Error reading file $network_interfaces_config: unexpected line '$line'");
}
}
close($fh);
return @ret;
}
# get_auto_defs()
# Returns a list of interfaces in auto lines
sub get_auto_defs
{
my @rv;
&open_readfile(CFGFILE, $network_interfaces_config);
while(<CFGFILE>) {
s/\r|\n//g;
s/^\s*#.*$//g;
if (/^\s*auto\s*(\S.*)/) {
push(@rv, split(/\s+/, $1));
}
}
close(CFGFILE);
return @rv;
}
# modify_auto_defs(iface, ...)
# Replaces all auto lines with one containing the interfaces given as params
sub modify_auto_defs
{
local $lref = &read_file_lines($network_interfaces_config);
local $i;
local $found;
local @ifaces = sort { length($a) <=> length($b) } @_;
for($i=0; $i<@$lref; $i++) {
local $l = $lref->[$i];
$l =~ s/\r|\n//g;
$l =~ s/^\s*#.*$//g;
if ($l =~ /^\s*auto\s*(.*)/) {
if (!$found++) {
# Replace the auto line
$lref->[$i] = "auto ".join(" ", @ifaces);
}
else {
# Remove another auto line
splice(@$lref, $i--, 1);
}
}
}
if (!$found) {
splice(@$lref, 0, 0, "auto ".join(" ", @ifaces));
}
&flush_file_lines($network_interfaces_config);
}
# modifies the options of an already stored interface definition
# the parameters should be (name, addrfam, method, options, mode, file)
# with options being an array of (param, value) pairs
# and mode being 0 for modify and 1 for delete
sub modify_interface_def
{
my ($name, $addrfam, $method, $options, $mode, $file) = @_;
$file ||= $network_interfaces_config;
# make a backup copy
©_source_dest($file, $file."~");
local *OLDCFGFILE, *NEWCFGFILE;
&open_readfile(OLDCFGFILE, $file."~") ||
error("Unable to open $file");
&lock_file($file);
&open_tempfile(NEWCFGFILE, ">$file", 1) ||
error("Unable to open $file");
my $inside_modify_region = 0;
my $iface_line = 0;
my $new_options_wrote;
while (defined ($line=<OLDCFGFILE>)) {
if ($inside_modify_region == 0 &&
$line =~ /^\s*iface\s+$name\s+$addrfam\s+\S+\s*$/) {
# Start of the iface section to modify
$inside_modify_region = 1;
$iface_line = 1;
$new_options_wrote = 0;
}
elsif ($inside_modify_region == 1 &&
($line =~ /^\s*iface\s+\S+\s+\S+\s+\S+\s*$/ ||
$line =~ /^\s*mapping/ ||
$line =~ /^\s*source/ ||
$line =~ /^\s*allow-hotplug/ ||
$line =~ /^\s*auto/)) {
# End of an iface section
$inside_modify_region = 0;
}
# preserve comments and blank lnks
if ($line =~ /^\s*#/ || $line =~ /^\s*$/) {
&print_tempfile(NEWCFGFILE, $line);
}
# inside modify region or not ?
elsif ($inside_modify_region == 0) {
&print_tempfile(NEWCFGFILE, $line);
}
else {
# should the iface line be changed or the options ?
if ($iface_line == 1 && $mode == 0) {
&print_tempfile(NEWCFGFILE, "iface $name $addrfam $method\n");
}
# only write the new options and skip the old ones or just do
# nothing if mode is delete
# write only upon first entrance here
if ($mode == 0 && $new_options_wrote == 0) {
$new_options_wrote = 1;
foreach $option (@$options) {
my ($param, $value) = @$option;
&print_tempfile(NEWCFGFILE,"\t$param $value\n");
}
}
}
$iface_line = 0;
}
close(OLDCFGFILE);
&close_tempfile(NEWCFGFILE);
&unlock_file($file);
&unlink_file($file."~");
}
# creates a new interface definition in the config file
# the parameters should be (name, addrfam, method, options, file)
# with options being an array of (param, value) pairs
# the selection key is (name, addrfam)
sub new_interface_def
{
local ($name, $addrfam, $method, $options, $file) = @_;
$file ||= $network_interfaces_config;
local *CFGFILE;
&open_lock_tempfile(CFGFILE, ">>$file") ||
error("Unable to open $file");
&print_tempfile(CFGFILE, "\niface $name $addrfam $method\n");
foreach $option (@$options) {
my ($param, $value) = @$option;
&print_tempfile(CFGFILE, "\t$param $value\n");
}
&close_tempfile(CFGFILE);
&unlock_file($file);
}
# delete an already defined interface
# the parameters should be (name, addrfam, file)
sub delete_interface_def
{
local ($name, $addrfam, $file) = @_;
&modify_interface_def($name, $addrfam, '', [], 1, $file);
&modify_module_def($name, 1);
}
# apply_network()
# Apply the interface and routing settings
sub apply_network
{
&system_logged("(cd / ; /etc/init.d/networking restart) >/dev/null 2>&1");
}
# get_default_gateway()
# Returns the default gateway IP (if one is set) and device (if set) boot time
# settings.
sub get_default_gateway
{
local @ifaces = &get_interface_defs();
local ($router, $addr);
foreach $iface (grep { $_->[1] eq 'inet' } @ifaces) {
foreach $o (@{$iface->[3]}) {
if ($o->[0] eq 'gateway') {
return ( $o->[1], $iface->[0] );
}
}
}
return ( );
}
# set_default_gateway([gateway, device])
# Sets the default gateway to the given IP accessible via the given device,
# in the boot time settings.
sub set_default_gateway
{
local @ifaces = &get_interface_defs();
foreach my $iface (grep { $_->[1] eq 'inet' } @ifaces) {
# Remove the gateway directive
$iface->[3] = [ grep { $_->[0] ne 'gateway' } @{$iface->[3]} ];
# Add if needed
if ($iface->[0] eq $_[1]) {
push(@{$iface->[3]}, [ 'gateway', $_[0] ]);
}
&modify_interface_def($iface->[0], $iface->[1], $iface->[2],
$iface->[3], 0, $iface->[4]);
}
}
# get_default_ipv6_gateway()
# Returns the default gateway IPv6 address (if one is set) and device (if set)
# boot time settings.
sub get_default_ipv6_gateway
{
local @ifaces = &get_interface_defs();
local ($router, $addr);
foreach $iface (grep { $_->[1] eq 'inet6' } @ifaces) {
foreach $o (@{$iface->[3]}) {
if ($o->[0] eq 'gateway') {
return ( $o->[1], $iface->[0] );
}
}
}
return ( );
}
# set_default_ipv6_gateway([gateway, device])
# Sets the default IPv6 gateway to the given IP accessible via the given device,
# in the boot time settings.
sub set_default_ipv6_gateway
{
local @ifaces = &get_interface_defs();
foreach my $iface (grep { $_->[1] eq 'inet6' } @ifaces) {
# Remove the gateway directive
$iface->[3] = [ grep { $_->[0] ne 'gateway' } @{$iface->[3]} ];
# Add if needed
if ($iface->[0] eq $_[1] && $_[0]) {
push(@{$iface->[3]}, [ 'gateway', $_[0] ]);
}
&modify_interface_def($iface->[0], $iface->[1], $iface->[2],
$iface->[3], 0, $iface->[4]);
}
}
# get_teaming_partner(devicename, line)
# Gets the teamingpartner of a configuration line
# Example configuration line: "/sbin/ifenslave bond0 eth0 eth1"
sub get_teaming_partner
{
my($deviceName, $line) = @_;
@params = split(/ /, $line);
my $return;
for($i = scalar(@params); $i > 0; $i--){
if($deviceName eq $params[$i]){
break;
} else {
$return = $params[$i] . " " . $return;
}
}
chop $return;
return $return;
}
sub supports_bonding
{
return $gconfig{'os_type'} eq 'debian-linux' && &has_command("ifenslave");
}
sub supports_vlans
{
return $gconfig{'os_type'} eq 'debian-linux' && &has_command("vconfig");
}
sub boot_iface_hardware
{
return $_[0] =~ /^(eth|em)/;
}
# supports_address6([&iface])
# Returns 1 if managing IPv6 interfaces is supported
sub supports_address6
{
local ($iface) = @_;
return !$iface || $iface->{'virtual'} eq '';
}
# Returns 1, as boot-time interfaces on Debian can exist without an IP (such as
# for bridging)
sub supports_no_address
{
return 1;
}
# Bridge interfaces can be created on debian
sub supports_bridges
{
return 1;
}
# bonding_option(suffix)
# Adds bond_ or bond- as appropriate
sub bonding_option
{
my ($sfx) = @_;
return ($gconfig{'os_version'} >= 7 ? "bond-" : "bond_").$sfx;
}
# os_save_dns_config(&config)
# On Debian, DNS resolves can also be stored in the interfaces file. Returns
# a flag indicating if a network restart is needed, and a flag indicating if
# /etc/resolv.conf is updated automatically.
sub os_save_dns_config
{
local ($conf) = @_;
local @ifaces = &get_interface_defs();
local @dnssearch;
local $need_apply = 0;
local $generated_resolv = -l "/etc/resolv.conf" ? 1 : 0;
if (@{$conf->{'domain'}} > 1) {
@dnssearch = ( [ 'dns-domain', join(" ", @{$conf->{'domain'}}) ] );
}
elsif (@{$conf->{'domain'}}) {
@dnssearch = ( [ 'dns-domain', $conf->{'domain'}->[0] ] );
}
foreach my $i (@ifaces) {
local ($ns) = grep { $_->[0] eq 'dns-nameservers' } @{$i->[3]};
if ($ns) {
if (@{$conf->{'nameserver'}}) {
$ns->[1] = join(' ', @{$conf->{'nameserver'}});
}
else {
$i->[3] = [ grep { $_->[0] ne 'nameservers' }
@{$i->[3]} ];
}
$i->[3] = [ grep { $_->[0] ne 'dns-domain' &&
$_->[0] ne 'dns-search' }
@{$i->[3]} ];
push(@{$i->[3]}, @dnssearch);
&modify_interface_def($i->[0], $i->[1], $i->[2],
$i->[3], 0);
$need_apply = 1;
}
}
if (!$need_apply && $generated_resolv) {
# Nameservers have to be defined in the interfaces file, but
# no interfaces have them yet. Find the first non-local
# interface with an IP, and add them there
foreach my $i (@ifaces) {
next if ($i->[0] =~ /^lo/);
local ($a) = grep { $_->[0] eq 'address' &&
&check_ipaddress($_->[1]) } @{$i->[3]};
next if (!$a);
if (@{$conf->{'nameserver'}}) {
push(@{$i->[3]}, [ 'dns-nameservers',
join(' ', @{$conf->{'nameserver'}}) ]);
}
push(@{$i->[3]}, @dnssearch);
&modify_interface_def($i->[0], $i->[1], $i->[2],
$i->[3], 0);
$need_apply = 1;
last;
}
}
return ($need_apply, $generated_resolv);
}
1;