Current File : //proc/self/root/usr/include/linux/nilfs2_ondisk.h
/* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */
/*
 * nilfs2_ondisk.h - NILFS2 on-disk structures
 *
 * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published
 * by the Free Software Foundation; either version 2.1 of the License, or
 * (at your option) any later version.
 */
/*
 *  linux/include/linux/ext2_fs.h
 *
 * Copyright (C) 1992, 1993, 1994, 1995
 * Remy Card (card@masi.ibp.fr)
 * Laboratoire MASI - Institut Blaise Pascal
 * Universite Pierre et Marie Curie (Paris VI)
 *
 *  from
 *
 *  linux/include/linux/minix_fs.h
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

#ifndef _LINUX_NILFS2_ONDISK_H
#define _LINUX_NILFS2_ONDISK_H

#include <linux/types.h>
#include <linux/magic.h>
#include <asm/byteorder.h>

#define NILFS_INODE_BMAP_SIZE	7

/**
 * struct nilfs_inode - structure of an inode on disk
 * @i_blocks: blocks count
 * @i_size: size in bytes
 * @i_ctime: creation time (seconds)
 * @i_mtime: modification time (seconds)
 * @i_ctime_nsec: creation time (nano seconds)
 * @i_mtime_nsec: modification time (nano seconds)
 * @i_uid: user id
 * @i_gid: group id
 * @i_mode: file mode
 * @i_links_count: links count
 * @i_flags: file flags
 * @i_bmap: block mapping
 * @i_xattr: extended attributes
 * @i_generation: file generation (for NFS)
 * @i_pad: padding
 */
struct nilfs_inode {
	__le64	i_blocks;
	__le64	i_size;
	__le64	i_ctime;
	__le64	i_mtime;
	__le32	i_ctime_nsec;
	__le32	i_mtime_nsec;
	__le32	i_uid;
	__le32	i_gid;
	__le16	i_mode;
	__le16	i_links_count;
	__le32	i_flags;
	__le64	i_bmap[NILFS_INODE_BMAP_SIZE];
#define i_device_code	i_bmap[0]
	__le64	i_xattr;
	__le32	i_generation;
	__le32	i_pad;
};

#define NILFS_MIN_INODE_SIZE		128

/**
 * struct nilfs_super_root - structure of super root
 * @sr_sum: check sum
 * @sr_bytes: byte count of the structure
 * @sr_flags: flags (reserved)
 * @sr_nongc_ctime: write time of the last segment not for cleaner operation
 * @sr_dat: DAT file inode
 * @sr_cpfile: checkpoint file inode
 * @sr_sufile: segment usage file inode
 */
struct nilfs_super_root {
	__le32 sr_sum;
	__le16 sr_bytes;
	__le16 sr_flags;
	__le64 sr_nongc_ctime;
	struct nilfs_inode sr_dat;
	struct nilfs_inode sr_cpfile;
	struct nilfs_inode sr_sufile;
};

#define NILFS_SR_MDT_OFFSET(inode_size, i)  \
	((unsigned long)&((struct nilfs_super_root *)0)->sr_dat + \
			(inode_size) * (i))
#define NILFS_SR_DAT_OFFSET(inode_size)     NILFS_SR_MDT_OFFSET(inode_size, 0)
#define NILFS_SR_CPFILE_OFFSET(inode_size)  NILFS_SR_MDT_OFFSET(inode_size, 1)
#define NILFS_SR_SUFILE_OFFSET(inode_size)  NILFS_SR_MDT_OFFSET(inode_size, 2)
#define NILFS_SR_BYTES(inode_size)	    NILFS_SR_MDT_OFFSET(inode_size, 3)

/*
 * Maximal mount counts
 */
#define NILFS_DFL_MAX_MNT_COUNT		50      /* 50 mounts */

/*
 * File system states (sbp->s_state, nilfs->ns_mount_state)
 */
#define NILFS_VALID_FS			0x0001  /* Unmounted cleanly */
#define NILFS_ERROR_FS			0x0002  /* Errors detected */
#define NILFS_RESIZE_FS			0x0004	/* Resize required */

/*
 * Mount flags (sbi->s_mount_opt)
 */
#define NILFS_MOUNT_ERROR_MODE		0x0070  /* Error mode mask */
#define NILFS_MOUNT_ERRORS_CONT		0x0010  /* Continue on errors */
#define NILFS_MOUNT_ERRORS_RO		0x0020  /* Remount fs ro on errors */
#define NILFS_MOUNT_ERRORS_PANIC	0x0040  /* Panic on errors */
#define NILFS_MOUNT_BARRIER		0x1000  /* Use block barriers */
#define NILFS_MOUNT_STRICT_ORDER	0x2000  /*
						 * Apply strict in-order
						 * semantics also for data
						 */
#define NILFS_MOUNT_NORECOVERY		0x4000  /*
						 * Disable write access during
						 * mount-time recovery
						 */
#define NILFS_MOUNT_DISCARD		0x8000  /* Issue DISCARD requests */


/**
 * struct nilfs_super_block - structure of super block on disk
 */
struct nilfs_super_block {
/*00*/	__le32	s_rev_level;		/* Revision level */
	__le16	s_minor_rev_level;	/* minor revision level */
	__le16	s_magic;		/* Magic signature */

	__le16  s_bytes;		/*
					 * Bytes count of CRC calculation
					 * for this structure. s_reserved
					 * is excluded.
					 */
	__le16  s_flags;		/* flags */
	__le32  s_crc_seed;		/* Seed value of CRC calculation */
/*10*/	__le32	s_sum;			/* Check sum of super block */

	__le32	s_log_block_size;	/*
					 * Block size represented as follows
					 * blocksize =
					 *     1 << (s_log_block_size + 10)
					 */
	__le64  s_nsegments;		/* Number of segments in filesystem */
/*20*/	__le64  s_dev_size;		/* block device size in bytes */
	__le64	s_first_data_block;	/* 1st seg disk block number */
/*30*/	__le32  s_blocks_per_segment;   /* number of blocks per full segment */
	__le32	s_r_segments_percentage; /* Reserved segments percentage */

	__le64  s_last_cno;		/* Last checkpoint number */
/*40*/	__le64  s_last_pseg;		/* disk block addr pseg written last */
	__le64  s_last_seq;             /* seq. number of seg written last */
/*50*/	__le64	s_free_blocks_count;	/* Free blocks count */

	__le64	s_ctime;		/*
					 * Creation time (execution time of
					 * newfs)
					 */
/*60*/	__le64	s_mtime;		/* Mount time */
	__le64	s_wtime;		/* Write time */
/*70*/	__le16	s_mnt_count;		/* Mount count */
	__le16	s_max_mnt_count;	/* Maximal mount count */
	__le16	s_state;		/* File system state */
	__le16	s_errors;		/* Behaviour when detecting errors */
	__le64	s_lastcheck;		/* time of last check */

/*80*/	__le32	s_checkinterval;	/* max. time between checks */
	__le32	s_creator_os;		/* OS */
	__le16	s_def_resuid;		/* Default uid for reserved blocks */
	__le16	s_def_resgid;		/* Default gid for reserved blocks */
	__le32	s_first_ino;		/* First non-reserved inode */

/*90*/	__le16  s_inode_size;		/* Size of an inode */
	__le16  s_dat_entry_size;       /* Size of a dat entry */
	__le16  s_checkpoint_size;      /* Size of a checkpoint */
	__le16	s_segment_usage_size;	/* Size of a segment usage */

/*98*/	__u8	s_uuid[16];		/* 128-bit uuid for volume */
/*A8*/	char	s_volume_name[80];	/* volume name */

/*F8*/	__le32  s_c_interval;           /* Commit interval of segment */
	__le32  s_c_block_max;          /*
					 * Threshold of data amount for
					 * the segment construction
					 */
/*100*/	__le64  s_feature_compat;	/* Compatible feature set */
	__le64  s_feature_compat_ro;	/* Read-only compatible feature set */
	__le64  s_feature_incompat;	/* Incompatible feature set */
	__u32	s_reserved[186];	/* padding to the end of the block */
};

/*
 * Codes for operating systems
 */
#define NILFS_OS_LINUX		0
/* Codes from 1 to 4 are reserved to keep compatibility with ext2 creator-OS */

/*
 * Revision levels
 */
#define NILFS_CURRENT_REV	2	/* current major revision */
#define NILFS_MINOR_REV		0	/* minor revision */
#define NILFS_MIN_SUPP_REV	2	/* minimum supported revision */

/*
 * Feature set definitions
 *
 * If there is a bit set in the incompatible feature set that the kernel
 * doesn't know about, it should refuse to mount the filesystem.
 */
#define NILFS_FEATURE_COMPAT_RO_BLOCK_COUNT	0x00000001ULL

#define NILFS_FEATURE_COMPAT_SUPP	0ULL
#define NILFS_FEATURE_COMPAT_RO_SUPP	NILFS_FEATURE_COMPAT_RO_BLOCK_COUNT
#define NILFS_FEATURE_INCOMPAT_SUPP	0ULL

/*
 * Bytes count of super_block for CRC-calculation
 */
#define NILFS_SB_BYTES  \
	((long)&((struct nilfs_super_block *)0)->s_reserved)

/*
 * Special inode number
 */
#define NILFS_ROOT_INO		2	/* Root file inode */
#define NILFS_DAT_INO		3	/* DAT file */
#define NILFS_CPFILE_INO	4	/* checkpoint file */
#define NILFS_SUFILE_INO	5	/* segment usage file */
#define NILFS_IFILE_INO		6	/* ifile */
#define NILFS_ATIME_INO		7	/* Atime file (reserved) */
#define NILFS_XATTR_INO		8	/* Xattribute file (reserved) */
#define NILFS_SKETCH_INO	10	/* Sketch file */
#define NILFS_USER_INO		11	/* Fisrt user's file inode number */

#define NILFS_SB_OFFSET_BYTES	1024	/* byte offset of nilfs superblock */

#define NILFS_SEG_MIN_BLOCKS	16	/*
					 * Minimum number of blocks in
					 * a full segment
					 */
#define NILFS_PSEG_MIN_BLOCKS	2	/*
					 * Minimum number of blocks in
					 * a partial segment
					 */
#define NILFS_MIN_NRSVSEGS	8	/*
					 * Minimum number of reserved
					 * segments
					 */

/*
 * We call DAT, cpfile, and sufile root metadata files.  Inodes of
 * these files are written in super root block instead of ifile, and
 * garbage collector doesn't keep any past versions of these files.
 */
#define NILFS_ROOT_METADATA_FILE(ino) \
	((ino) >= NILFS_DAT_INO && (ino) <= NILFS_SUFILE_INO)

/*
 * bytes offset of secondary super block
 */
#define NILFS_SB2_OFFSET_BYTES(devsize)	((((devsize) >> 12) - 1) << 12)

/*
 * Maximal count of links to a file
 */
#define NILFS_LINK_MAX		32000

/*
 * Structure of a directory entry
 *  (Same as ext2)
 */

#define NILFS_NAME_LEN 255

/*
 * Block size limitations
 */
#define NILFS_MIN_BLOCK_SIZE		1024
#define NILFS_MAX_BLOCK_SIZE		65536

/*
 * The new version of the directory entry.  Since V0 structures are
 * stored in intel byte order, and the name_len field could never be
 * bigger than 255 chars, it's safe to reclaim the extra byte for the
 * file_type field.
 */
struct nilfs_dir_entry {
	__le64	inode;			/* Inode number */
	__le16	rec_len;		/* Directory entry length */
	__u8	name_len;		/* Name length */
	__u8	file_type;		/* Dir entry type (file, dir, etc) */
	char	name[NILFS_NAME_LEN];	/* File name */
	char    pad;
};

/*
 * NILFS directory file types.  Only the low 3 bits are used.  The
 * other bits are reserved for now.
 */
enum {
	NILFS_FT_UNKNOWN,
	NILFS_FT_REG_FILE,
	NILFS_FT_DIR,
	NILFS_FT_CHRDEV,
	NILFS_FT_BLKDEV,
	NILFS_FT_FIFO,
	NILFS_FT_SOCK,
	NILFS_FT_SYMLINK,
	NILFS_FT_MAX
};

/*
 * NILFS_DIR_PAD defines the directory entries boundaries
 *
 * NOTE: It must be a multiple of 8
 */
#define NILFS_DIR_PAD			8
#define NILFS_DIR_ROUND			(NILFS_DIR_PAD - 1)
#define NILFS_DIR_REC_LEN(name_len)	(((name_len) + 12 + NILFS_DIR_ROUND) & \
					~NILFS_DIR_ROUND)
#define NILFS_MAX_REC_LEN		((1 << 16) - 1)

/**
 * struct nilfs_finfo - file information
 * @fi_ino: inode number
 * @fi_cno: checkpoint number
 * @fi_nblocks: number of blocks (including intermediate blocks)
 * @fi_ndatablk: number of file data blocks
 */
struct nilfs_finfo {
	__le64 fi_ino;
	__le64 fi_cno;
	__le32 fi_nblocks;
	__le32 fi_ndatablk;
};

/**
 * struct nilfs_binfo_v - information on a data block (except DAT)
 * @bi_vblocknr: virtual block number
 * @bi_blkoff: block offset
 */
struct nilfs_binfo_v {
	__le64 bi_vblocknr;
	__le64 bi_blkoff;
};

/**
 * struct nilfs_binfo_dat - information on a DAT node block
 * @bi_blkoff: block offset
 * @bi_level: level
 * @bi_pad: padding
 */
struct nilfs_binfo_dat {
	__le64 bi_blkoff;
	__u8 bi_level;
	__u8 bi_pad[7];
};

/**
 * union nilfs_binfo: block information
 * @bi_v: nilfs_binfo_v structure
 * @bi_dat: nilfs_binfo_dat structure
 */
union nilfs_binfo {
	struct nilfs_binfo_v bi_v;
	struct nilfs_binfo_dat bi_dat;
};

/**
 * struct nilfs_segment_summary - segment summary header
 * @ss_datasum: checksum of data
 * @ss_sumsum: checksum of segment summary
 * @ss_magic: magic number
 * @ss_bytes: size of this structure in bytes
 * @ss_flags: flags
 * @ss_seq: sequence number
 * @ss_create: creation timestamp
 * @ss_next: next segment
 * @ss_nblocks: number of blocks
 * @ss_nfinfo: number of finfo structures
 * @ss_sumbytes: total size of segment summary in bytes
 * @ss_pad: padding
 * @ss_cno: checkpoint number
 */
struct nilfs_segment_summary {
	__le32 ss_datasum;
	__le32 ss_sumsum;
	__le32 ss_magic;
	__le16 ss_bytes;
	__le16 ss_flags;
	__le64 ss_seq;
	__le64 ss_create;
	__le64 ss_next;
	__le32 ss_nblocks;
	__le32 ss_nfinfo;
	__le32 ss_sumbytes;
	__le32 ss_pad;
	__le64 ss_cno;
	/* array of finfo structures */
};

#define NILFS_SEGSUM_MAGIC	0x1eaffa11  /* segment summary magic number */

/*
 * Segment summary flags
 */
#define NILFS_SS_LOGBGN 0x0001  /* begins a logical segment */
#define NILFS_SS_LOGEND 0x0002  /* ends a logical segment */
#define NILFS_SS_SR     0x0004  /* has super root */
#define NILFS_SS_SYNDT  0x0008  /* includes data only updates */
#define NILFS_SS_GC     0x0010  /* segment written for cleaner operation */

/**
 * struct nilfs_btree_node - header of B-tree node block
 * @bn_flags: flags
 * @bn_level: level
 * @bn_nchildren: number of children
 * @bn_pad: padding
 */
struct nilfs_btree_node {
	__u8 bn_flags;
	__u8 bn_level;
	__le16 bn_nchildren;
	__le32 bn_pad;
};

/* flags */
#define NILFS_BTREE_NODE_ROOT   0x01

/* level */
#define NILFS_BTREE_LEVEL_DATA          0
#define NILFS_BTREE_LEVEL_NODE_MIN      (NILFS_BTREE_LEVEL_DATA + 1)
#define NILFS_BTREE_LEVEL_MAX           14	/* Max level (exclusive) */

/**
 * struct nilfs_direct_node - header of built-in bmap array
 * @dn_flags: flags
 * @dn_pad: padding
 */
struct nilfs_direct_node {
	__u8 dn_flags;
	__u8 pad[7];
};

/**
 * struct nilfs_palloc_group_desc - block group descriptor
 * @pg_nfrees: number of free entries in block group
 */
struct nilfs_palloc_group_desc {
	__le32 pg_nfrees;
};

/**
 * struct nilfs_dat_entry - disk address translation entry
 * @de_blocknr: block number
 * @de_start: start checkpoint number
 * @de_end: end checkpoint number
 * @de_rsv: reserved for future use
 */
struct nilfs_dat_entry {
	__le64 de_blocknr;
	__le64 de_start;
	__le64 de_end;
	__le64 de_rsv;
};

#define NILFS_MIN_DAT_ENTRY_SIZE	32

/**
 * struct nilfs_snapshot_list - snapshot list
 * @ssl_next: next checkpoint number on snapshot list
 * @ssl_prev: previous checkpoint number on snapshot list
 */
struct nilfs_snapshot_list {
	__le64 ssl_next;
	__le64 ssl_prev;
};

/**
 * struct nilfs_checkpoint - checkpoint structure
 * @cp_flags: flags
 * @cp_checkpoints_count: checkpoints count in a block
 * @cp_snapshot_list: snapshot list
 * @cp_cno: checkpoint number
 * @cp_create: creation timestamp
 * @cp_nblk_inc: number of blocks incremented by this checkpoint
 * @cp_inodes_count: inodes count
 * @cp_blocks_count: blocks count
 * @cp_ifile_inode: inode of ifile
 */
struct nilfs_checkpoint {
	__le32 cp_flags;
	__le32 cp_checkpoints_count;
	struct nilfs_snapshot_list cp_snapshot_list;
	__le64 cp_cno;
	__le64 cp_create;
	__le64 cp_nblk_inc;
	__le64 cp_inodes_count;
	__le64 cp_blocks_count;

	/*
	 * Do not change the byte offset of ifile inode.
	 * To keep the compatibility of the disk format,
	 * additional fields should be added behind cp_ifile_inode.
	 */
	struct nilfs_inode cp_ifile_inode;
};

#define NILFS_MIN_CHECKPOINT_SIZE	(64 + NILFS_MIN_INODE_SIZE)

/* checkpoint flags */
enum {
	NILFS_CHECKPOINT_SNAPSHOT,
	NILFS_CHECKPOINT_INVALID,
	NILFS_CHECKPOINT_SKETCH,
	NILFS_CHECKPOINT_MINOR,
};

#define NILFS_CHECKPOINT_FNS(flag, name)				\
static __inline__ void							\
nilfs_checkpoint_set_##name(struct nilfs_checkpoint *cp)		\
{									\
	cp->cp_flags = __cpu_to_le32(__le32_to_cpu(cp->cp_flags) |	\
				     (1UL << NILFS_CHECKPOINT_##flag));	\
}									\
static __inline__ void							\
nilfs_checkpoint_clear_##name(struct nilfs_checkpoint *cp)		\
{									\
	cp->cp_flags = __cpu_to_le32(__le32_to_cpu(cp->cp_flags) &	\
				   ~(1UL << NILFS_CHECKPOINT_##flag));	\
}									\
static __inline__ int							\
nilfs_checkpoint_##name(const struct nilfs_checkpoint *cp)		\
{									\
	return !!(__le32_to_cpu(cp->cp_flags) &				\
		  (1UL << NILFS_CHECKPOINT_##flag));			\
}

NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
NILFS_CHECKPOINT_FNS(INVALID, invalid)
NILFS_CHECKPOINT_FNS(MINOR, minor)

/**
 * struct nilfs_cpfile_header - checkpoint file header
 * @ch_ncheckpoints: number of checkpoints
 * @ch_nsnapshots: number of snapshots
 * @ch_snapshot_list: snapshot list
 */
struct nilfs_cpfile_header {
	__le64 ch_ncheckpoints;
	__le64 ch_nsnapshots;
	struct nilfs_snapshot_list ch_snapshot_list;
};

#define NILFS_CPFILE_FIRST_CHECKPOINT_OFFSET				\
	((sizeof(struct nilfs_cpfile_header) +				\
	  sizeof(struct nilfs_checkpoint) - 1) /			\
			sizeof(struct nilfs_checkpoint))

/**
 * struct nilfs_segment_usage - segment usage
 * @su_lastmod: last modified timestamp
 * @su_nblocks: number of blocks in segment
 * @su_flags: flags
 */
struct nilfs_segment_usage {
	__le64 su_lastmod;
	__le32 su_nblocks;
	__le32 su_flags;
};

#define NILFS_MIN_SEGMENT_USAGE_SIZE	16

/* segment usage flag */
enum {
	NILFS_SEGMENT_USAGE_ACTIVE,
	NILFS_SEGMENT_USAGE_DIRTY,
	NILFS_SEGMENT_USAGE_ERROR,
};

#define NILFS_SEGMENT_USAGE_FNS(flag, name)				\
static __inline__ void							\
nilfs_segment_usage_set_##name(struct nilfs_segment_usage *su)		\
{									\
	su->su_flags = __cpu_to_le32(__le32_to_cpu(su->su_flags) |	\
				   (1UL << NILFS_SEGMENT_USAGE_##flag));\
}									\
static __inline__ void							\
nilfs_segment_usage_clear_##name(struct nilfs_segment_usage *su)	\
{									\
	su->su_flags =							\
		__cpu_to_le32(__le32_to_cpu(su->su_flags) &		\
			    ~(1UL << NILFS_SEGMENT_USAGE_##flag));      \
}									\
static __inline__ int							\
nilfs_segment_usage_##name(const struct nilfs_segment_usage *su)	\
{									\
	return !!(__le32_to_cpu(su->su_flags) &				\
		  (1UL << NILFS_SEGMENT_USAGE_##flag));			\
}

NILFS_SEGMENT_USAGE_FNS(ACTIVE, active)
NILFS_SEGMENT_USAGE_FNS(DIRTY, dirty)
NILFS_SEGMENT_USAGE_FNS(ERROR, error)

static __inline__ void
nilfs_segment_usage_set_clean(struct nilfs_segment_usage *su)
{
	su->su_lastmod = __cpu_to_le64(0);
	su->su_nblocks = __cpu_to_le32(0);
	su->su_flags = __cpu_to_le32(0);
}

static __inline__ int
nilfs_segment_usage_clean(const struct nilfs_segment_usage *su)
{
	return !__le32_to_cpu(su->su_flags);
}

/**
 * struct nilfs_sufile_header - segment usage file header
 * @sh_ncleansegs: number of clean segments
 * @sh_ndirtysegs: number of dirty segments
 * @sh_last_alloc: last allocated segment number
 */
struct nilfs_sufile_header {
	__le64 sh_ncleansegs;
	__le64 sh_ndirtysegs;
	__le64 sh_last_alloc;
	/* ... */
};

#define NILFS_SUFILE_FIRST_SEGMENT_USAGE_OFFSET				\
	((sizeof(struct nilfs_sufile_header) +				\
	  sizeof(struct nilfs_segment_usage) - 1) /			\
			 sizeof(struct nilfs_segment_usage))

#endif	/* _LINUX_NILFS2_ONDISK_H */
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!