Current File : //lib/modules/6.8.0-60-generic/build/tools/testing/selftests/net/forwarding/tc_flower.sh
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0

ALL_TESTS="match_dst_mac_test match_src_mac_test match_dst_ip_test \
	match_src_ip_test match_ip_flags_test match_pcp_test match_vlan_test \
	match_ip_tos_test match_indev_test match_ip_ttl_test
	match_mpls_label_test \
	match_mpls_tc_test match_mpls_bos_test match_mpls_ttl_test \
	match_mpls_lse_test"
NUM_NETIFS=2
source tc_common.sh
source lib.sh

tcflags="skip_hw"

h1_create()
{
	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
}

h1_destroy()
{
	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
}

h2_create()
{
	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
	tc qdisc add dev $h2 clsact
}

h2_destroy()
{
	tc qdisc del dev $h2 clsact
	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
}

match_dst_mac_test()
{
	local dummy_mac=de:ad:be:ef:aa:aa

	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags dst_mac $dummy_mac action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags dst_mac $h2mac action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter"

	tc_check_packets "dev $h2 ingress" 102 0
	check_fail $? "Did not match on correct filter"

	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower

	log_test "dst_mac match ($tcflags)"
}

match_src_mac_test()
{
	local dummy_mac=de:ad:be:ef:aa:aa

	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags src_mac $dummy_mac action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags src_mac $h1mac action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter"

	tc_check_packets "dev $h2 ingress" 102 0
	check_fail $? "Did not match on correct filter"

	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower

	log_test "src_mac match ($tcflags)"
}

match_dst_ip_test()
{
	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags dst_ip 198.51.100.2 action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags dst_ip 192.0.2.2 action drop
	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
		$tcflags dst_ip 192.0.2.0/24 action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter"

	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 103 1
	check_err $? "Did not match on correct filter with mask"

	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower

	log_test "dst_ip match ($tcflags)"
}

match_src_ip_test()
{
	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags src_ip 198.51.100.1 action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags src_ip 192.0.2.1 action drop
	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
		$tcflags src_ip 192.0.2.0/24 action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter"

	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 103 1
	check_err $? "Did not match on correct filter with mask"

	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower

	log_test "src_ip match ($tcflags)"
}

match_ip_flags_test()
{
	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags ip_flags frag action continue
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags ip_flags firstfrag action continue
	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
		$tcflags ip_flags nofirstfrag action continue
	tc filter add dev $h2 ingress protocol ip pref 4 handle 104 flower \
		$tcflags ip_flags nofrag action drop

	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "frag=0" -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on wrong frag filter (nofrag)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_fail $? "Matched on wrong firstfrag filter (nofrag)"

	tc_check_packets "dev $h2 ingress" 103 1
	check_err $? "Did not match on nofirstfrag filter (nofrag) "

	tc_check_packets "dev $h2 ingress" 104 1
	check_err $? "Did not match on nofrag filter (nofrag)"

	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "frag=0,mf" -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_err $? "Did not match on frag filter (1stfrag)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match fistfrag filter (1stfrag)"

	tc_check_packets "dev $h2 ingress" 103 1
	check_err $? "Matched on wrong nofirstfrag filter (1stfrag)"

	tc_check_packets "dev $h2 ingress" 104 1
	check_err $? "Match on wrong nofrag filter (1stfrag)"

	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "frag=256,mf" -q
	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "frag=256" -q

	tc_check_packets "dev $h2 ingress" 101 3
	check_err $? "Did not match on frag filter (no1stfrag)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Matched on wrong firstfrag filter (no1stfrag)"

	tc_check_packets "dev $h2 ingress" 103 3
	check_err $? "Did not match on nofirstfrag filter (no1stfrag)"

	tc_check_packets "dev $h2 ingress" 104 1
	check_err $? "Matched on nofrag filter (no1stfrag)"

	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
	tc filter del dev $h2 ingress protocol ip pref 4 handle 104 flower

	log_test "ip_flags match ($tcflags)"
}

match_pcp_test()
{
	RET=0

	vlan_create $h2 85 v$h2 192.0.2.11/24

	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \
		flower vlan_prio 6 $tcflags dst_mac $h2mac action drop
	tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \
		flower vlan_prio 7 $tcflags dst_mac $h2mac action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 7:85 -t ip -q
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q

	tc_check_packets "dev $h2 ingress" 101 0
	check_err $? "Matched on specified PCP when should not"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on specified PCP"

	tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower

	vlan_destroy $h2 85

	log_test "PCP match ($tcflags)"
}

match_vlan_test()
{
	RET=0

	vlan_create $h2 85 v$h2 192.0.2.11/24
	vlan_create $h2 75 v$h2 192.0.2.10/24

	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \
		flower vlan_id 75 $tcflags action drop
	tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \
		flower vlan_id 85 $tcflags action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q

	tc_check_packets "dev $h2 ingress" 101 0
	check_err $? "Matched on specified VLAN when should not"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on specified VLAN"

	tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower

	vlan_destroy $h2 75
	vlan_destroy $h2 85

	log_test "VLAN match ($tcflags)"
}

match_ip_tos_test()
{
	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags dst_ip 192.0.2.2 ip_tos 0x20 action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags dst_ip 192.0.2.2 ip_tos 0x18 action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip tos=18 -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter (0x18)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter (0x18)"

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip tos=20 -q

	tc_check_packets "dev $h2 ingress" 102 2
	check_fail $? "Matched on a wrong filter (0x20)"

	tc_check_packets "dev $h2 ingress" 101 1
	check_err $? "Did not match on correct filter (0x20)"

	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower

	log_test "ip_tos match ($tcflags)"
}

match_ip_ttl_test()
{
	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags dst_ip 192.0.2.2 action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "ttl=63" -q

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "ttl=63,mf,frag=256" -q

	tc_check_packets "dev $h2 ingress" 102 1
	check_fail $? "Matched on the wrong filter (no check on ttl)"

	tc_check_packets "dev $h2 ingress" 101 2
	check_err $? "Did not match on correct filter (ttl=63)"

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip "ttl=255" -q

	tc_check_packets "dev $h2 ingress" 101 3
	check_fail $? "Matched on a wrong filter (ttl=63)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter (no check on ttl)"

	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower

	log_test "ip_ttl match ($tcflags)"
}

match_indev_test()
{
	RET=0

	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
		$tcflags indev $h1 dst_mac $h2mac action drop
	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
		$tcflags indev $h2 dst_mac $h2mac action drop

	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
		-t ip -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter"

	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower

	log_test "indev match ($tcflags)"
}

# Unfortunately, mausezahn can't build MPLS headers when used in L2
# mode, so we have this function to build Label Stack Entries.
mpls_lse()
{
	local label=$1
	local tc=$2
	local bos=$3
	local ttl=$4

	printf "%02x %02x %02x %02x"                        \
		$((label >> 12))                            \
		$((label >> 4 & 0xff))                      \
		$((((label & 0xf) << 4) + (tc << 1) + bos)) \
		$ttl
}

match_mpls_label_test()
{
	local ethtype="88 47"; readonly ethtype
	local pkt

	RET=0

	check_tc_mpls_support $h2 || return 0

	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
		flower $tcflags mpls_label 0 action drop
	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
		flower $tcflags mpls_label 1048575 action drop

	pkt="$ethtype $(mpls_lse 1048575 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter (1048575)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter (1048575)"

	pkt="$ethtype $(mpls_lse 0 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 102 2
	check_fail $? "Matched on a wrong filter (0)"

	tc_check_packets "dev $h2 ingress" 101 1
	check_err $? "Did not match on correct filter (0)"

	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower

	log_test "mpls_label match ($tcflags)"
}

match_mpls_tc_test()
{
	local ethtype="88 47"; readonly ethtype
	local pkt

	RET=0

	check_tc_mpls_support $h2 || return 0

	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
		flower $tcflags mpls_tc 0 action drop
	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
		flower $tcflags mpls_tc 7 action drop

	pkt="$ethtype $(mpls_lse 0 7 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter (7)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter (7)"

	pkt="$ethtype $(mpls_lse 0 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 102 2
	check_fail $? "Matched on a wrong filter (0)"

	tc_check_packets "dev $h2 ingress" 101 1
	check_err $? "Did not match on correct filter (0)"

	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower

	log_test "mpls_tc match ($tcflags)"
}

match_mpls_bos_test()
{
	local ethtype="88 47"; readonly ethtype
	local pkt

	RET=0

	check_tc_mpls_support $h2 || return 0

	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
		flower $tcflags mpls_bos 0 action drop
	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
		flower $tcflags mpls_bos 1 action drop

	pkt="$ethtype $(mpls_lse 0 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter (1)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter (1)"

	# Need to add a second label to properly mark the Bottom of Stack
	pkt="$ethtype $(mpls_lse 0 0 0 255) $(mpls_lse 0 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 102 2
	check_fail $? "Matched on a wrong filter (0)"

	tc_check_packets "dev $h2 ingress" 101 1
	check_err $? "Did not match on correct filter (0)"

	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower

	log_test "mpls_bos match ($tcflags)"
}

match_mpls_ttl_test()
{
	local ethtype="88 47"; readonly ethtype
	local pkt

	RET=0

	check_tc_mpls_support $h2 || return 0

	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
		flower $tcflags mpls_ttl 0 action drop
	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
		flower $tcflags mpls_ttl 255 action drop

	pkt="$ethtype $(mpls_lse 0 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 101 1
	check_fail $? "Matched on a wrong filter (255)"

	tc_check_packets "dev $h2 ingress" 102 1
	check_err $? "Did not match on correct filter (255)"

	pkt="$ethtype $(mpls_lse 0 0 1 0)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	tc_check_packets "dev $h2 ingress" 102 2
	check_fail $? "Matched on a wrong filter (0)"

	tc_check_packets "dev $h2 ingress" 101 1
	check_err $? "Did not match on correct filter (0)"

	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower

	log_test "mpls_ttl match ($tcflags)"
}

match_mpls_lse_test()
{
	local ethtype="88 47"; readonly ethtype
	local pkt

	RET=0

	check_tc_mpls_lse_stats $h2 || return 0

	# Match on first LSE (minimal values for each field)
	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
		flower $tcflags mpls lse depth 1 label 0 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
		flower $tcflags mpls lse depth 1 tc 0 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 3 handle 103 \
		flower $tcflags mpls lse depth 1 bos 0 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 4 handle 104 \
		flower $tcflags mpls lse depth 1 ttl 0 action continue

	# Match on second LSE (maximal values for each field)
	tc filter add dev $h2 ingress protocol mpls_uc pref 5 handle 105 \
		flower $tcflags mpls lse depth 2 label 1048575 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 6 handle 106 \
		flower $tcflags mpls lse depth 2 tc 7 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 7 handle 107 \
		flower $tcflags mpls lse depth 2 bos 1 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 8 handle 108 \
		flower $tcflags mpls lse depth 2 ttl 255 action continue

	# Match on LSE depth
	tc filter add dev $h2 ingress protocol mpls_uc pref 9 handle 109 \
		flower $tcflags mpls lse depth 1 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 10 handle 110 \
		flower $tcflags mpls lse depth 2 action continue
	tc filter add dev $h2 ingress protocol mpls_uc pref 11 handle 111 \
		flower $tcflags mpls lse depth 3 action continue

	# Base packet, matched by all filters (except for stack depth 3)
	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 7 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Make a variant of the above packet, with a non-matching value
	# for each LSE field

	# Wrong label at depth 1
	pkt="$ethtype $(mpls_lse 1 0 0 0) $(mpls_lse 1048575 7 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong TC at depth 1
	pkt="$ethtype $(mpls_lse 0 1 0 0) $(mpls_lse 1048575 7 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong BOS at depth 1 (not adding a second LSE here since BOS is set
	# in the first label, so anything that'd follow wouldn't be considered)
	pkt="$ethtype $(mpls_lse 0 0 1 0)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong TTL at depth 1
	pkt="$ethtype $(mpls_lse 0 0 0 1) $(mpls_lse 1048575 7 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong label at depth 2
	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048574 7 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong TC at depth 2
	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 6 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong BOS at depth 2 (adding a third LSE here since BOS isn't set in
	# the second label)
	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 7 0 255)"
	pkt="$pkt $(mpls_lse 0 0 1 255)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Wrong TTL at depth 2
	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 7 1 254)"
	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q

	# Filters working at depth 1 should match all packets but one

	tc_check_packets "dev $h2 ingress" 101 8
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 102 8
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 103 8
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 104 8
	check_err $? "Did not match on correct filter"

	# Filters working at depth 2 should match all packets but two (because
	# of the test packet where the label stack depth is just one)

	tc_check_packets "dev $h2 ingress" 105 7
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 106 7
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 107 7
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 108 7
	check_err $? "Did not match on correct filter"

	# Finally, verify the filters that only match on LSE depth

	tc_check_packets "dev $h2 ingress" 109 9
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 110 8
	check_err $? "Did not match on correct filter"

	tc_check_packets "dev $h2 ingress" 111 1
	check_err $? "Did not match on correct filter"

	tc filter del dev $h2 ingress protocol mpls_uc pref 11 handle 111 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 10 handle 110 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 9 handle 109 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 8 handle 108 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 7 handle 107 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 6 handle 106 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 5 handle 105 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 4 handle 104 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 3 handle 103 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower

	log_test "mpls lse match ($tcflags)"
}

setup_prepare()
{
	h1=${NETIFS[p1]}
	h2=${NETIFS[p2]}
	h1mac=$(mac_get $h1)
	h2mac=$(mac_get $h2)

	vrf_prepare

	h1_create
	h2_create
}

cleanup()
{
	pre_cleanup

	h2_destroy
	h1_destroy

	vrf_cleanup
}

trap cleanup EXIT

setup_prepare
setup_wait

tests_run

tc_offload_check
if [[ $? -ne 0 ]]; then
	log_info "Could not test offloaded functionality"
else
	tcflags="skip_sw"
	tests_run
fi

exit $EXIT_STATUS
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!