| Current File : //lib/modules/6.8.0-60-generic/build/include/linux/printk.h |
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __KERNEL_PRINTK__
#define __KERNEL_PRINTK__
#include <linux/stdarg.h>
#include <linux/init.h>
#include <linux/kern_levels.h>
#include <linux/linkage.h>
#include <linux/ratelimit_types.h>
#include <linux/once_lite.h>
extern const char linux_banner[];
extern const char linux_proc_banner[];
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
#define PRINTK_MAX_SINGLE_HEADER_LEN 2
static inline int printk_get_level(const char *buffer)
{
if (buffer[0] == KERN_SOH_ASCII && buffer[1]) {
switch (buffer[1]) {
case '0' ... '7':
case 'c': /* KERN_CONT */
return buffer[1];
}
}
return 0;
}
static inline const char *printk_skip_level(const char *buffer)
{
if (printk_get_level(buffer))
return buffer + 2;
return buffer;
}
static inline const char *printk_skip_headers(const char *buffer)
{
while (printk_get_level(buffer))
buffer = printk_skip_level(buffer);
return buffer;
}
/* printk's without a loglevel use this.. */
#define MESSAGE_LOGLEVEL_DEFAULT CONFIG_MESSAGE_LOGLEVEL_DEFAULT
/* We show everything that is MORE important than this.. */
#define CONSOLE_LOGLEVEL_SILENT 0 /* Mum's the word */
#define CONSOLE_LOGLEVEL_MIN 1 /* Minimum loglevel we let people use */
#define CONSOLE_LOGLEVEL_DEBUG 10 /* issue debug messages */
#define CONSOLE_LOGLEVEL_MOTORMOUTH 15 /* You can't shut this one up */
/*
* Default used to be hard-coded at 7, quiet used to be hardcoded at 4,
* we're now allowing both to be set from kernel config.
*/
#define CONSOLE_LOGLEVEL_DEFAULT CONFIG_CONSOLE_LOGLEVEL_DEFAULT
#define CONSOLE_LOGLEVEL_QUIET CONFIG_CONSOLE_LOGLEVEL_QUIET
extern int console_printk[];
#define console_loglevel (console_printk[0])
#define default_message_loglevel (console_printk[1])
#define minimum_console_loglevel (console_printk[2])
#define default_console_loglevel (console_printk[3])
extern void console_verbose(void);
/* strlen("ratelimit") + 1 */
#define DEVKMSG_STR_MAX_SIZE 10
extern char devkmsg_log_str[];
struct ctl_table;
extern int suppress_printk;
struct va_format {
const char *fmt;
va_list *va;
};
/*
* FW_BUG
* Add this to a message where you are sure the firmware is buggy or behaves
* really stupid or out of spec. Be aware that the responsible BIOS developer
* should be able to fix this issue or at least get a concrete idea of the
* problem by reading your message without the need of looking at the kernel
* code.
*
* Use it for definite and high priority BIOS bugs.
*
* FW_WARN
* Use it for not that clear (e.g. could the kernel messed up things already?)
* and medium priority BIOS bugs.
*
* FW_INFO
* Use this one if you want to tell the user or vendor about something
* suspicious, but generally harmless related to the firmware.
*
* Use it for information or very low priority BIOS bugs.
*/
#define FW_BUG "[Firmware Bug]: "
#define FW_WARN "[Firmware Warn]: "
#define FW_INFO "[Firmware Info]: "
/*
* HW_ERR
* Add this to a message for hardware errors, so that user can report
* it to hardware vendor instead of LKML or software vendor.
*/
#define HW_ERR "[Hardware Error]: "
/*
* DEPRECATED
* Add this to a message whenever you want to warn user space about the use
* of a deprecated aspect of an API so they can stop using it
*/
#define DEPRECATED "[Deprecated]: "
/*
* Dummy printk for disabled debugging statements to use whilst maintaining
* gcc's format checking.
*/
#define no_printk(fmt, ...) \
({ \
if (0) \
_printk(fmt, ##__VA_ARGS__); \
0; \
})
#ifdef CONFIG_EARLY_PRINTK
extern asmlinkage __printf(1, 2)
void early_printk(const char *fmt, ...);
#else
static inline __printf(1, 2) __cold
void early_printk(const char *s, ...) { }
#endif
struct dev_printk_info;
#ifdef CONFIG_PRINTK
asmlinkage __printf(4, 0)
int vprintk_emit(int facility, int level,
const struct dev_printk_info *dev_info,
const char *fmt, va_list args);
asmlinkage __printf(1, 0)
int vprintk(const char *fmt, va_list args);
asmlinkage __printf(1, 2) __cold
int _printk(const char *fmt, ...);
/*
* Special printk facility for scheduler/timekeeping use only, _DO_NOT_USE_ !
*/
__printf(1, 2) __cold int _printk_deferred(const char *fmt, ...);
extern void __printk_safe_enter(void);
extern void __printk_safe_exit(void);
/*
* The printk_deferred_enter/exit macros are available only as a hack for
* some code paths that need to defer all printk console printing. Interrupts
* must be disabled for the deferred duration.
*/
#define printk_deferred_enter __printk_safe_enter
#define printk_deferred_exit __printk_safe_exit
/*
* Please don't use printk_ratelimit(), because it shares ratelimiting state
* with all other unrelated printk_ratelimit() callsites. Instead use
* printk_ratelimited() or plain old __ratelimit().
*/
extern int __printk_ratelimit(const char *func);
#define printk_ratelimit() __printk_ratelimit(__func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
extern int printk_delay_msec;
extern int dmesg_restrict;
extern void wake_up_klogd(void);
char *log_buf_addr_get(void);
u32 log_buf_len_get(void);
void log_buf_vmcoreinfo_setup(void);
void __init setup_log_buf(int early);
__printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...);
void dump_stack_print_info(const char *log_lvl);
void show_regs_print_info(const char *log_lvl);
extern asmlinkage void dump_stack_lvl(const char *log_lvl) __cold;
extern asmlinkage void dump_stack(void) __cold;
void printk_trigger_flush(void);
#else
static inline __printf(1, 0)
int vprintk(const char *s, va_list args)
{
return 0;
}
static inline __printf(1, 2) __cold
int _printk(const char *s, ...)
{
return 0;
}
static inline __printf(1, 2) __cold
int _printk_deferred(const char *s, ...)
{
return 0;
}
static inline void printk_deferred_enter(void)
{
}
static inline void printk_deferred_exit(void)
{
}
static inline int printk_ratelimit(void)
{
return 0;
}
static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec)
{
return false;
}
static inline void wake_up_klogd(void)
{
}
static inline char *log_buf_addr_get(void)
{
return NULL;
}
static inline u32 log_buf_len_get(void)
{
return 0;
}
static inline void log_buf_vmcoreinfo_setup(void)
{
}
static inline void setup_log_buf(int early)
{
}
static inline __printf(1, 2) void dump_stack_set_arch_desc(const char *fmt, ...)
{
}
static inline void dump_stack_print_info(const char *log_lvl)
{
}
static inline void show_regs_print_info(const char *log_lvl)
{
}
static inline void dump_stack_lvl(const char *log_lvl)
{
}
static inline void dump_stack(void)
{
}
static inline void printk_trigger_flush(void)
{
}
#endif
bool this_cpu_in_panic(void);
#ifdef CONFIG_SMP
extern int __printk_cpu_sync_try_get(void);
extern void __printk_cpu_sync_wait(void);
extern void __printk_cpu_sync_put(void);
#else
#define __printk_cpu_sync_try_get() true
#define __printk_cpu_sync_wait()
#define __printk_cpu_sync_put()
#endif /* CONFIG_SMP */
/**
* printk_cpu_sync_get_irqsave() - Disable interrupts and acquire the printk
* cpu-reentrant spinning lock.
* @flags: Stack-allocated storage for saving local interrupt state,
* to be passed to printk_cpu_sync_put_irqrestore().
*
* If the lock is owned by another CPU, spin until it becomes available.
* Interrupts are restored while spinning.
*
* CAUTION: This function must be used carefully. It does not behave like a
* typical lock. Here are important things to watch out for...
*
* * This function is reentrant on the same CPU. Therefore the calling
* code must not assume exclusive access to data if code accessing the
* data can run reentrant or within NMI context on the same CPU.
*
* * If there exists usage of this function from NMI context, it becomes
* unsafe to perform any type of locking or spinning to wait for other
* CPUs after calling this function from any context. This includes
* using spinlocks or any other busy-waiting synchronization methods.
*/
#define printk_cpu_sync_get_irqsave(flags) \
for (;;) { \
local_irq_save(flags); \
if (__printk_cpu_sync_try_get()) \
break; \
local_irq_restore(flags); \
__printk_cpu_sync_wait(); \
}
/**
* printk_cpu_sync_put_irqrestore() - Release the printk cpu-reentrant spinning
* lock and restore interrupts.
* @flags: Caller's saved interrupt state, from printk_cpu_sync_get_irqsave().
*/
#define printk_cpu_sync_put_irqrestore(flags) \
do { \
__printk_cpu_sync_put(); \
local_irq_restore(flags); \
} while (0)
extern int kptr_restrict;
/**
* pr_fmt - used by the pr_*() macros to generate the printk format string
* @fmt: format string passed from a pr_*() macro
*
* This macro can be used to generate a unified format string for pr_*()
* macros. A common use is to prefix all pr_*() messages in a file with a common
* string. For example, defining this at the top of a source file:
*
* #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
*
* would prefix all pr_info, pr_emerg... messages in the file with the module
* name.
*/
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
struct module;
#ifdef CONFIG_PRINTK_INDEX
struct pi_entry {
const char *fmt;
const char *func;
const char *file;
unsigned int line;
/*
* While printk and pr_* have the level stored in the string at compile
* time, some subsystems dynamically add it at runtime through the
* format string. For these dynamic cases, we allow the subsystem to
* tell us the level at compile time.
*
* NULL indicates that the level, if any, is stored in fmt.
*/
const char *level;
/*
* The format string used by various subsystem specific printk()
* wrappers to prefix the message.
*
* Note that the static prefix defined by the pr_fmt() macro is stored
* directly in the message format (@fmt), not here.
*/
const char *subsys_fmt_prefix;
} __packed;
#define __printk_index_emit(_fmt, _level, _subsys_fmt_prefix) \
do { \
if (__builtin_constant_p(_fmt) && __builtin_constant_p(_level)) { \
/*
* We check __builtin_constant_p multiple times here
* for the same input because GCC will produce an error
* if we try to assign a static variable to fmt if it
* is not a constant, even with the outer if statement.
*/ \
static const struct pi_entry _entry \
__used = { \
.fmt = __builtin_constant_p(_fmt) ? (_fmt) : NULL, \
.func = __func__, \
.file = __FILE__, \
.line = __LINE__, \
.level = __builtin_constant_p(_level) ? (_level) : NULL, \
.subsys_fmt_prefix = _subsys_fmt_prefix,\
}; \
static const struct pi_entry *_entry_ptr \
__used __section(".printk_index") = &_entry; \
} \
} while (0)
#else /* !CONFIG_PRINTK_INDEX */
#define __printk_index_emit(...) do {} while (0)
#endif /* CONFIG_PRINTK_INDEX */
/*
* Some subsystems have their own custom printk that applies a va_format to a
* generic format, for example, to include a device number or other metadata
* alongside the format supplied by the caller.
*
* In order to store these in the way they would be emitted by the printk
* infrastructure, the subsystem provides us with the start, fixed string, and
* any subsequent text in the format string.
*
* We take a variable argument list as pr_fmt/dev_fmt/etc are sometimes passed
* as multiple arguments (eg: `"%s: ", "blah"`), and we must only take the
* first one.
*
* subsys_fmt_prefix must be known at compile time, or compilation will fail
* (since this is a mistake). If fmt or level is not known at compile time, no
* index entry will be made (since this can legitimately happen).
*/
#define printk_index_subsys_emit(subsys_fmt_prefix, level, fmt, ...) \
__printk_index_emit(fmt, level, subsys_fmt_prefix)
#define printk_index_wrap(_p_func, _fmt, ...) \
({ \
__printk_index_emit(_fmt, NULL, NULL); \
_p_func(_fmt, ##__VA_ARGS__); \
})
/**
* printk - print a kernel message
* @fmt: format string
*
* This is printk(). It can be called from any context. We want it to work.
*
* If printk indexing is enabled, _printk() is called from printk_index_wrap.
* Otherwise, printk is simply #defined to _printk.
*
* We try to grab the console_lock. If we succeed, it's easy - we log the
* output and call the console drivers. If we fail to get the semaphore, we
* place the output into the log buffer and return. The current holder of
* the console_sem will notice the new output in console_unlock(); and will
* send it to the consoles before releasing the lock.
*
* One effect of this deferred printing is that code which calls printk() and
* then changes console_loglevel may break. This is because console_loglevel
* is inspected when the actual printing occurs.
*
* See also:
* printf(3)
*
* See the vsnprintf() documentation for format string extensions over C99.
*/
#define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__)
#define printk_deferred(fmt, ...) \
printk_index_wrap(_printk_deferred, fmt, ##__VA_ARGS__)
/**
* pr_emerg - Print an emergency-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_EMERG loglevel. It uses pr_fmt() to
* generate the format string.
*/
#define pr_emerg(fmt, ...) \
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_alert - Print an alert-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_ALERT loglevel. It uses pr_fmt() to
* generate the format string.
*/
#define pr_alert(fmt, ...) \
printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_crit - Print a critical-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_CRIT loglevel. It uses pr_fmt() to
* generate the format string.
*/
#define pr_crit(fmt, ...) \
printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_err - Print an error-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_ERR loglevel. It uses pr_fmt() to
* generate the format string.
*/
#define pr_err(fmt, ...) \
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_warn - Print a warning-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_WARNING loglevel. It uses pr_fmt()
* to generate the format string.
*/
#define pr_warn(fmt, ...) \
printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_notice - Print a notice-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_NOTICE loglevel. It uses pr_fmt() to
* generate the format string.
*/
#define pr_notice(fmt, ...) \
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_info - Print an info-level message
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_INFO loglevel. It uses pr_fmt() to
* generate the format string.
*/
#define pr_info(fmt, ...) \
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
/**
* pr_cont - Continues a previous log message in the same line.
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_CONT loglevel. It should only be
* used when continuing a log message with no newline ('\n') enclosed. Otherwise
* it defaults back to KERN_DEFAULT loglevel.
*/
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
/**
* pr_devel - Print a debug-level message conditionally
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to a printk with KERN_DEBUG loglevel if DEBUG is
* defined. Otherwise it does nothing.
*
* It uses pr_fmt() to generate the format string.
*/
#ifdef DEBUG
#define pr_devel(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
/* If you are writing a driver, please use dev_dbg instead */
#if defined(CONFIG_DYNAMIC_DEBUG) || \
(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
#include <linux/dynamic_debug.h>
/**
* pr_debug - Print a debug-level message conditionally
* @fmt: format string
* @...: arguments for the format string
*
* This macro expands to dynamic_pr_debug() if CONFIG_DYNAMIC_DEBUG is
* set. Otherwise, if DEBUG is defined, it's equivalent to a printk with
* KERN_DEBUG loglevel. If DEBUG is not defined it does nothing.
*
* It uses pr_fmt() to generate the format string (dynamic_pr_debug() uses
* pr_fmt() internally).
*/
#define pr_debug(fmt, ...) \
dynamic_pr_debug(fmt, ##__VA_ARGS__)
#elif defined(DEBUG)
#define pr_debug(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
/*
* Print a one-time message (analogous to WARN_ONCE() et al):
*/
#ifdef CONFIG_PRINTK
#define printk_once(fmt, ...) \
DO_ONCE_LITE(printk, fmt, ##__VA_ARGS__)
#define printk_deferred_once(fmt, ...) \
DO_ONCE_LITE(printk_deferred, fmt, ##__VA_ARGS__)
#else
#define printk_once(fmt, ...) \
no_printk(fmt, ##__VA_ARGS__)
#define printk_deferred_once(fmt, ...) \
no_printk(fmt, ##__VA_ARGS__)
#endif
#define pr_emerg_once(fmt, ...) \
printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert_once(fmt, ...) \
printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit_once(fmt, ...) \
printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err_once(fmt, ...) \
printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warn_once(fmt, ...) \
printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_notice_once(fmt, ...) \
printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info_once(fmt, ...) \
printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
/* no pr_cont_once, don't do that... */
#if defined(DEBUG)
#define pr_devel_once(fmt, ...) \
printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel_once(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug_once(fmt, ...) \
printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug_once(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
/*
* ratelimited messages with local ratelimit_state,
* no local ratelimit_state used in the !PRINTK case
*/
#ifdef CONFIG_PRINTK
#define printk_ratelimited(fmt, ...) \
({ \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
\
if (__ratelimit(&_rs)) \
printk(fmt, ##__VA_ARGS__); \
})
#else
#define printk_ratelimited(fmt, ...) \
no_printk(fmt, ##__VA_ARGS__)
#endif
#define pr_emerg_ratelimited(fmt, ...) \
printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert_ratelimited(fmt, ...) \
printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit_ratelimited(fmt, ...) \
printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err_ratelimited(fmt, ...) \
printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warn_ratelimited(fmt, ...) \
printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_notice_ratelimited(fmt, ...) \
printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info_ratelimited(fmt, ...) \
printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
/* no pr_cont_ratelimited, don't do that... */
#if defined(DEBUG)
#define pr_devel_ratelimited(fmt, ...) \
printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel_ratelimited(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
/* If you are writing a driver, please use dev_dbg instead */
#if defined(CONFIG_DYNAMIC_DEBUG) || \
(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
/* descriptor check is first to prevent flooding with "callbacks suppressed" */
#define pr_debug_ratelimited(fmt, ...) \
do { \
static DEFINE_RATELIMIT_STATE(_rs, \
DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, pr_fmt(fmt)); \
if (DYNAMIC_DEBUG_BRANCH(descriptor) && \
__ratelimit(&_rs)) \
__dynamic_pr_debug(&descriptor, pr_fmt(fmt), ##__VA_ARGS__); \
} while (0)
#elif defined(DEBUG)
#define pr_debug_ratelimited(fmt, ...) \
printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug_ratelimited(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
extern const struct file_operations kmsg_fops;
enum {
DUMP_PREFIX_NONE,
DUMP_PREFIX_ADDRESS,
DUMP_PREFIX_OFFSET
};
extern int hex_dump_to_buffer(const void *buf, size_t len, int rowsize,
int groupsize, char *linebuf, size_t linebuflen,
bool ascii);
#ifdef CONFIG_PRINTK
extern void print_hex_dump(const char *level, const char *prefix_str,
int prefix_type, int rowsize, int groupsize,
const void *buf, size_t len, bool ascii);
#else
static inline void print_hex_dump(const char *level, const char *prefix_str,
int prefix_type, int rowsize, int groupsize,
const void *buf, size_t len, bool ascii)
{
}
static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len)
{
}
#endif
#if defined(CONFIG_DYNAMIC_DEBUG) || \
(defined(CONFIG_DYNAMIC_DEBUG_CORE) && defined(DYNAMIC_DEBUG_MODULE))
#define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii)
#elif defined(DEBUG)
#define print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii)
#else
static inline void print_hex_dump_debug(const char *prefix_str, int prefix_type,
int rowsize, int groupsize,
const void *buf, size_t len, bool ascii)
{
}
#endif
/**
* print_hex_dump_bytes - shorthand form of print_hex_dump() with default params
* @prefix_str: string to prefix each line with;
* caller supplies trailing spaces for alignment if desired
* @prefix_type: controls whether prefix of an offset, address, or none
* is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS, %DUMP_PREFIX_NONE)
* @buf: data blob to dump
* @len: number of bytes in the @buf
*
* Calls print_hex_dump(), with log level of KERN_DEBUG,
* rowsize of 16, groupsize of 1, and ASCII output included.
*/
#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
print_hex_dump_debug(prefix_str, prefix_type, 16, 1, buf, len, true)
#endif