Current File : //lib/modules/6.8.0-60-generic/build/include/linux/dma-mapping.h
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_DMA_MAPPING_H
#define _LINUX_DMA_MAPPING_H

#include <linux/cache.h>
#include <linux/sizes.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/dma-direction.h>
#include <linux/scatterlist.h>
#include <linux/bug.h>
#include <linux/mem_encrypt.h>

/**
 * List of possible attributes associated with a DMA mapping. The semantics
 * of each attribute should be defined in Documentation/core-api/dma-attributes.rst.
 */

/*
 * DMA_ATTR_WEAK_ORDERING: Specifies that reads and writes to the mapping
 * may be weakly ordered, that is that reads and writes may pass each other.
 */
#define DMA_ATTR_WEAK_ORDERING		(1UL << 1)
/*
 * DMA_ATTR_WRITE_COMBINE: Specifies that writes to the mapping may be
 * buffered to improve performance.
 */
#define DMA_ATTR_WRITE_COMBINE		(1UL << 2)
/*
 * DMA_ATTR_NO_KERNEL_MAPPING: Lets the platform to avoid creating a kernel
 * virtual mapping for the allocated buffer.
 */
#define DMA_ATTR_NO_KERNEL_MAPPING	(1UL << 4)
/*
 * DMA_ATTR_SKIP_CPU_SYNC: Allows platform code to skip synchronization of
 * the CPU cache for the given buffer assuming that it has been already
 * transferred to 'device' domain.
 */
#define DMA_ATTR_SKIP_CPU_SYNC		(1UL << 5)
/*
 * DMA_ATTR_FORCE_CONTIGUOUS: Forces contiguous allocation of the buffer
 * in physical memory.
 */
#define DMA_ATTR_FORCE_CONTIGUOUS	(1UL << 6)
/*
 * DMA_ATTR_ALLOC_SINGLE_PAGES: This is a hint to the DMA-mapping subsystem
 * that it's probably not worth the time to try to allocate memory to in a way
 * that gives better TLB efficiency.
 */
#define DMA_ATTR_ALLOC_SINGLE_PAGES	(1UL << 7)
/*
 * DMA_ATTR_NO_WARN: This tells the DMA-mapping subsystem to suppress
 * allocation failure reports (similarly to __GFP_NOWARN).
 */
#define DMA_ATTR_NO_WARN	(1UL << 8)

/*
 * DMA_ATTR_PRIVILEGED: used to indicate that the buffer is fully
 * accessible at an elevated privilege level (and ideally inaccessible or
 * at least read-only at lesser-privileged levels).
 */
#define DMA_ATTR_PRIVILEGED		(1UL << 9)

/*
 * A dma_addr_t can hold any valid DMA or bus address for the platform.  It can
 * be given to a device to use as a DMA source or target.  It is specific to a
 * given device and there may be a translation between the CPU physical address
 * space and the bus address space.
 *
 * DMA_MAPPING_ERROR is the magic error code if a mapping failed.  It should not
 * be used directly in drivers, but checked for using dma_mapping_error()
 * instead.
 */
#define DMA_MAPPING_ERROR		(~(dma_addr_t)0)

#define DMA_BIT_MASK(n)	(((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))

#ifdef CONFIG_DMA_API_DEBUG
void debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
void debug_dma_map_single(struct device *dev, const void *addr,
		unsigned long len);
#else
static inline void debug_dma_mapping_error(struct device *dev,
		dma_addr_t dma_addr)
{
}
static inline void debug_dma_map_single(struct device *dev, const void *addr,
		unsigned long len)
{
}
#endif /* CONFIG_DMA_API_DEBUG */

#ifdef CONFIG_HAS_DMA
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
	debug_dma_mapping_error(dev, dma_addr);

	if (unlikely(dma_addr == DMA_MAPPING_ERROR))
		return -ENOMEM;
	return 0;
}

dma_addr_t dma_map_page_attrs(struct device *dev, struct page *page,
		size_t offset, size_t size, enum dma_data_direction dir,
		unsigned long attrs);
void dma_unmap_page_attrs(struct device *dev, dma_addr_t addr, size_t size,
		enum dma_data_direction dir, unsigned long attrs);
unsigned int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
		int nents, enum dma_data_direction dir, unsigned long attrs);
void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg,
				      int nents, enum dma_data_direction dir,
				      unsigned long attrs);
int dma_map_sgtable(struct device *dev, struct sg_table *sgt,
		enum dma_data_direction dir, unsigned long attrs);
dma_addr_t dma_map_resource(struct device *dev, phys_addr_t phys_addr,
		size_t size, enum dma_data_direction dir, unsigned long attrs);
void dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size,
		enum dma_data_direction dir, unsigned long attrs);
void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr, size_t size,
		enum dma_data_direction dir);
void dma_sync_single_for_device(struct device *dev, dma_addr_t addr,
		size_t size, enum dma_data_direction dir);
void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
		    int nelems, enum dma_data_direction dir);
void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
		       int nelems, enum dma_data_direction dir);
void *dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
		gfp_t flag, unsigned long attrs);
void dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
		dma_addr_t dma_handle, unsigned long attrs);
void *dmam_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
		gfp_t gfp, unsigned long attrs);
void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
		dma_addr_t dma_handle);
int dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt,
		void *cpu_addr, dma_addr_t dma_addr, size_t size,
		unsigned long attrs);
int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
		void *cpu_addr, dma_addr_t dma_addr, size_t size,
		unsigned long attrs);
bool dma_can_mmap(struct device *dev);
bool dma_pci_p2pdma_supported(struct device *dev);
int dma_set_mask(struct device *dev, u64 mask);
int dma_set_coherent_mask(struct device *dev, u64 mask);
u64 dma_get_required_mask(struct device *dev);
bool dma_addressing_limited(struct device *dev);
size_t dma_max_mapping_size(struct device *dev);
size_t dma_opt_mapping_size(struct device *dev);
bool dma_need_sync(struct device *dev, dma_addr_t dma_addr);
unsigned long dma_get_merge_boundary(struct device *dev);
struct sg_table *dma_alloc_noncontiguous(struct device *dev, size_t size,
		enum dma_data_direction dir, gfp_t gfp, unsigned long attrs);
void dma_free_noncontiguous(struct device *dev, size_t size,
		struct sg_table *sgt, enum dma_data_direction dir);
void *dma_vmap_noncontiguous(struct device *dev, size_t size,
		struct sg_table *sgt);
void dma_vunmap_noncontiguous(struct device *dev, void *vaddr);
int dma_mmap_noncontiguous(struct device *dev, struct vm_area_struct *vma,
		size_t size, struct sg_table *sgt);
#else /* CONFIG_HAS_DMA */
static inline dma_addr_t dma_map_page_attrs(struct device *dev,
		struct page *page, size_t offset, size_t size,
		enum dma_data_direction dir, unsigned long attrs)
{
	return DMA_MAPPING_ERROR;
}
static inline void dma_unmap_page_attrs(struct device *dev, dma_addr_t addr,
		size_t size, enum dma_data_direction dir, unsigned long attrs)
{
}
static inline unsigned int dma_map_sg_attrs(struct device *dev,
		struct scatterlist *sg, int nents, enum dma_data_direction dir,
		unsigned long attrs)
{
	return 0;
}
static inline void dma_unmap_sg_attrs(struct device *dev,
		struct scatterlist *sg, int nents, enum dma_data_direction dir,
		unsigned long attrs)
{
}
static inline int dma_map_sgtable(struct device *dev, struct sg_table *sgt,
		enum dma_data_direction dir, unsigned long attrs)
{
	return -EOPNOTSUPP;
}
static inline dma_addr_t dma_map_resource(struct device *dev,
		phys_addr_t phys_addr, size_t size, enum dma_data_direction dir,
		unsigned long attrs)
{
	return DMA_MAPPING_ERROR;
}
static inline void dma_unmap_resource(struct device *dev, dma_addr_t addr,
		size_t size, enum dma_data_direction dir, unsigned long attrs)
{
}
static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
		size_t size, enum dma_data_direction dir)
{
}
static inline void dma_sync_single_for_device(struct device *dev,
		dma_addr_t addr, size_t size, enum dma_data_direction dir)
{
}
static inline void dma_sync_sg_for_cpu(struct device *dev,
		struct scatterlist *sg, int nelems, enum dma_data_direction dir)
{
}
static inline void dma_sync_sg_for_device(struct device *dev,
		struct scatterlist *sg, int nelems, enum dma_data_direction dir)
{
}
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
	return -ENOMEM;
}
static inline void *dma_alloc_attrs(struct device *dev, size_t size,
		dma_addr_t *dma_handle, gfp_t flag, unsigned long attrs)
{
	return NULL;
}
static void dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
		dma_addr_t dma_handle, unsigned long attrs)
{
}
static inline void *dmam_alloc_attrs(struct device *dev, size_t size,
		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
{
	return NULL;
}
static inline void dmam_free_coherent(struct device *dev, size_t size,
		void *vaddr, dma_addr_t dma_handle)
{
}
static inline int dma_get_sgtable_attrs(struct device *dev,
		struct sg_table *sgt, void *cpu_addr, dma_addr_t dma_addr,
		size_t size, unsigned long attrs)
{
	return -ENXIO;
}
static inline int dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
		void *cpu_addr, dma_addr_t dma_addr, size_t size,
		unsigned long attrs)
{
	return -ENXIO;
}
static inline bool dma_can_mmap(struct device *dev)
{
	return false;
}
static inline bool dma_pci_p2pdma_supported(struct device *dev)
{
	return false;
}
static inline int dma_set_mask(struct device *dev, u64 mask)
{
	return -EIO;
}
static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
{
	return -EIO;
}
static inline u64 dma_get_required_mask(struct device *dev)
{
	return 0;
}
static inline bool dma_addressing_limited(struct device *dev)
{
	return false;
}
static inline size_t dma_max_mapping_size(struct device *dev)
{
	return 0;
}
static inline size_t dma_opt_mapping_size(struct device *dev)
{
	return 0;
}
static inline bool dma_need_sync(struct device *dev, dma_addr_t dma_addr)
{
	return false;
}
static inline unsigned long dma_get_merge_boundary(struct device *dev)
{
	return 0;
}
static inline struct sg_table *dma_alloc_noncontiguous(struct device *dev,
		size_t size, enum dma_data_direction dir, gfp_t gfp,
		unsigned long attrs)
{
	return NULL;
}
static inline void dma_free_noncontiguous(struct device *dev, size_t size,
		struct sg_table *sgt, enum dma_data_direction dir)
{
}
static inline void *dma_vmap_noncontiguous(struct device *dev, size_t size,
		struct sg_table *sgt)
{
	return NULL;
}
static inline void dma_vunmap_noncontiguous(struct device *dev, void *vaddr)
{
}
static inline int dma_mmap_noncontiguous(struct device *dev,
		struct vm_area_struct *vma, size_t size, struct sg_table *sgt)
{
	return -EINVAL;
}
#endif /* CONFIG_HAS_DMA */

struct page *dma_alloc_pages(struct device *dev, size_t size,
		dma_addr_t *dma_handle, enum dma_data_direction dir, gfp_t gfp);
void dma_free_pages(struct device *dev, size_t size, struct page *page,
		dma_addr_t dma_handle, enum dma_data_direction dir);
int dma_mmap_pages(struct device *dev, struct vm_area_struct *vma,
		size_t size, struct page *page);

static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
		dma_addr_t *dma_handle, enum dma_data_direction dir, gfp_t gfp)
{
	struct page *page = dma_alloc_pages(dev, size, dma_handle, dir, gfp);
	return page ? page_address(page) : NULL;
}

static inline void dma_free_noncoherent(struct device *dev, size_t size,
		void *vaddr, dma_addr_t dma_handle, enum dma_data_direction dir)
{
	dma_free_pages(dev, size, virt_to_page(vaddr), dma_handle, dir);
}

static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
		size_t size, enum dma_data_direction dir, unsigned long attrs)
{
	/* DMA must never operate on areas that might be remapped. */
	if (dev_WARN_ONCE(dev, is_vmalloc_addr(ptr),
			  "rejecting DMA map of vmalloc memory\n"))
		return DMA_MAPPING_ERROR;
	debug_dma_map_single(dev, ptr, size);
	return dma_map_page_attrs(dev, virt_to_page(ptr), offset_in_page(ptr),
			size, dir, attrs);
}

static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr,
		size_t size, enum dma_data_direction dir, unsigned long attrs)
{
	return dma_unmap_page_attrs(dev, addr, size, dir, attrs);
}

static inline void dma_sync_single_range_for_cpu(struct device *dev,
		dma_addr_t addr, unsigned long offset, size_t size,
		enum dma_data_direction dir)
{
	return dma_sync_single_for_cpu(dev, addr + offset, size, dir);
}

static inline void dma_sync_single_range_for_device(struct device *dev,
		dma_addr_t addr, unsigned long offset, size_t size,
		enum dma_data_direction dir)
{
	return dma_sync_single_for_device(dev, addr + offset, size, dir);
}

/**
 * dma_unmap_sgtable - Unmap the given buffer for DMA
 * @dev:	The device for which to perform the DMA operation
 * @sgt:	The sg_table object describing the buffer
 * @dir:	DMA direction
 * @attrs:	Optional DMA attributes for the unmap operation
 *
 * Unmaps a buffer described by a scatterlist stored in the given sg_table
 * object for the @dir DMA operation by the @dev device. After this function
 * the ownership of the buffer is transferred back to the CPU domain.
 */
static inline void dma_unmap_sgtable(struct device *dev, struct sg_table *sgt,
		enum dma_data_direction dir, unsigned long attrs)
{
	dma_unmap_sg_attrs(dev, sgt->sgl, sgt->orig_nents, dir, attrs);
}

/**
 * dma_sync_sgtable_for_cpu - Synchronize the given buffer for CPU access
 * @dev:	The device for which to perform the DMA operation
 * @sgt:	The sg_table object describing the buffer
 * @dir:	DMA direction
 *
 * Performs the needed cache synchronization and moves the ownership of the
 * buffer back to the CPU domain, so it is safe to perform any access to it
 * by the CPU. Before doing any further DMA operations, one has to transfer
 * the ownership of the buffer back to the DMA domain by calling the
 * dma_sync_sgtable_for_device().
 */
static inline void dma_sync_sgtable_for_cpu(struct device *dev,
		struct sg_table *sgt, enum dma_data_direction dir)
{
	dma_sync_sg_for_cpu(dev, sgt->sgl, sgt->orig_nents, dir);
}

/**
 * dma_sync_sgtable_for_device - Synchronize the given buffer for DMA
 * @dev:	The device for which to perform the DMA operation
 * @sgt:	The sg_table object describing the buffer
 * @dir:	DMA direction
 *
 * Performs the needed cache synchronization and moves the ownership of the
 * buffer back to the DMA domain, so it is safe to perform the DMA operation.
 * Once finished, one has to call dma_sync_sgtable_for_cpu() or
 * dma_unmap_sgtable().
 */
static inline void dma_sync_sgtable_for_device(struct device *dev,
		struct sg_table *sgt, enum dma_data_direction dir)
{
	dma_sync_sg_for_device(dev, sgt->sgl, sgt->orig_nents, dir);
}

#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, 0)
#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, 0)
#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0)
#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0)
#define dma_map_page(d, p, o, s, r) dma_map_page_attrs(d, p, o, s, r, 0)
#define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0)
#define dma_get_sgtable(d, t, v, h, s) dma_get_sgtable_attrs(d, t, v, h, s, 0)
#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, 0)

bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size);

static inline void *dma_alloc_coherent(struct device *dev, size_t size,
		dma_addr_t *dma_handle, gfp_t gfp)
{
	return dma_alloc_attrs(dev, size, dma_handle, gfp,
			(gfp & __GFP_NOWARN) ? DMA_ATTR_NO_WARN : 0);
}

static inline void dma_free_coherent(struct device *dev, size_t size,
		void *cpu_addr, dma_addr_t dma_handle)
{
	return dma_free_attrs(dev, size, cpu_addr, dma_handle, 0);
}


static inline u64 dma_get_mask(struct device *dev)
{
	if (dev->dma_mask && *dev->dma_mask)
		return *dev->dma_mask;
	return DMA_BIT_MASK(32);
}

/*
 * Set both the DMA mask and the coherent DMA mask to the same thing.
 * Note that we don't check the return value from dma_set_coherent_mask()
 * as the DMA API guarantees that the coherent DMA mask can be set to
 * the same or smaller than the streaming DMA mask.
 */
static inline int dma_set_mask_and_coherent(struct device *dev, u64 mask)
{
	int rc = dma_set_mask(dev, mask);
	if (rc == 0)
		dma_set_coherent_mask(dev, mask);
	return rc;
}

/*
 * Similar to the above, except it deals with the case where the device
 * does not have dev->dma_mask appropriately setup.
 */
static inline int dma_coerce_mask_and_coherent(struct device *dev, u64 mask)
{
	dev->dma_mask = &dev->coherent_dma_mask;
	return dma_set_mask_and_coherent(dev, mask);
}

static inline unsigned int dma_get_max_seg_size(struct device *dev)
{
	if (dev->dma_parms && dev->dma_parms->max_segment_size)
		return dev->dma_parms->max_segment_size;
	return SZ_64K;
}

static inline int dma_set_max_seg_size(struct device *dev, unsigned int size)
{
	if (dev->dma_parms) {
		dev->dma_parms->max_segment_size = size;
		return 0;
	}
	return -EIO;
}

static inline unsigned long dma_get_seg_boundary(struct device *dev)
{
	if (dev->dma_parms && dev->dma_parms->segment_boundary_mask)
		return dev->dma_parms->segment_boundary_mask;
	return ULONG_MAX;
}

/**
 * dma_get_seg_boundary_nr_pages - return the segment boundary in "page" units
 * @dev: device to guery the boundary for
 * @page_shift: ilog() of the IOMMU page size
 *
 * Return the segment boundary in IOMMU page units (which may be different from
 * the CPU page size) for the passed in device.
 *
 * If @dev is NULL a boundary of U32_MAX is assumed, this case is just for
 * non-DMA API callers.
 */
static inline unsigned long dma_get_seg_boundary_nr_pages(struct device *dev,
		unsigned int page_shift)
{
	if (!dev)
		return (U32_MAX >> page_shift) + 1;
	return (dma_get_seg_boundary(dev) >> page_shift) + 1;
}

static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask)
{
	if (dev->dma_parms) {
		dev->dma_parms->segment_boundary_mask = mask;
		return 0;
	}
	return -EIO;
}

static inline unsigned int dma_get_min_align_mask(struct device *dev)
{
	if (dev->dma_parms)
		return dev->dma_parms->min_align_mask;
	return 0;
}

static inline int dma_set_min_align_mask(struct device *dev,
		unsigned int min_align_mask)
{
	if (WARN_ON_ONCE(!dev->dma_parms))
		return -EIO;
	dev->dma_parms->min_align_mask = min_align_mask;
	return 0;
}

#ifndef dma_get_cache_alignment
static inline int dma_get_cache_alignment(void)
{
#ifdef ARCH_HAS_DMA_MINALIGN
	return ARCH_DMA_MINALIGN;
#endif
	return 1;
}
#endif

static inline void *dmam_alloc_coherent(struct device *dev, size_t size,
		dma_addr_t *dma_handle, gfp_t gfp)
{
	return dmam_alloc_attrs(dev, size, dma_handle, gfp,
			(gfp & __GFP_NOWARN) ? DMA_ATTR_NO_WARN : 0);
}

static inline void *dma_alloc_wc(struct device *dev, size_t size,
				 dma_addr_t *dma_addr, gfp_t gfp)
{
	unsigned long attrs = DMA_ATTR_WRITE_COMBINE;

	if (gfp & __GFP_NOWARN)
		attrs |= DMA_ATTR_NO_WARN;

	return dma_alloc_attrs(dev, size, dma_addr, gfp, attrs);
}

static inline void dma_free_wc(struct device *dev, size_t size,
			       void *cpu_addr, dma_addr_t dma_addr)
{
	return dma_free_attrs(dev, size, cpu_addr, dma_addr,
			      DMA_ATTR_WRITE_COMBINE);
}

static inline int dma_mmap_wc(struct device *dev,
			      struct vm_area_struct *vma,
			      void *cpu_addr, dma_addr_t dma_addr,
			      size_t size)
{
	return dma_mmap_attrs(dev, vma, cpu_addr, dma_addr, size,
			      DMA_ATTR_WRITE_COMBINE);
}

#ifdef CONFIG_NEED_DMA_MAP_STATE
#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
#else
#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
#define dma_unmap_len(PTR, LEN_NAME)             (0)
#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
#endif

#endif /* _LINUX_DMA_MAPPING_H */
¿Qué es la limpieza dental de perros? - Clínica veterinaria


Es la eliminación del sarro y la placa adherida a la superficie de los dientes mediante un equipo de ultrasonidos que garantiza la integridad de las piezas dentales a la vez que elimina en profundidad cualquier resto de suciedad.

A continuación se procede al pulido de los dientes mediante una fresa especial que elimina la placa bacteriana y devuelve a los dientes el aspecto sano que deben tener.

Una vez terminado todo el proceso, se mantiene al perro en observación hasta que se despierta de la anestesia, bajo la atenta supervisión de un veterinario.

¿Cada cuánto tiempo tengo que hacerle una limpieza dental a mi perro?

A partir de cierta edad, los perros pueden necesitar una limpieza dental anual o bianual. Depende de cada caso. En líneas generales, puede decirse que los perros de razas pequeñas suelen acumular más sarro y suelen necesitar una atención mayor en cuanto a higiene dental.


Riesgos de una mala higiene


Los riesgos más evidentes de una mala higiene dental en los perros son los siguientes:

  • Cuando la acumulación de sarro no se trata, se puede producir una inflamación y retracción de las encías que puede descalzar el diente y provocar caídas.
  • Mal aliento (halitosis).
  • Sarro perros
  • Puede ir a más
  • Las bacterias de la placa pueden trasladarse a través del torrente circulatorio a órganos vitales como el corazón ocasionando problemas de endocarditis en las válvulas. Las bacterias pueden incluso acantonarse en huesos (La osteomielitis es la infección ósea, tanto cortical como medular) provocando mucho dolor y una artritis séptica).

¿Cómo se forma el sarro?

El sarro es la calcificación de la placa dental. Los restos de alimentos, junto con las bacterias presentes en la boca, van a formar la placa bacteriana o placa dental. Si la placa no se retira, al mezclarse con la saliva y los minerales presentes en ella, reaccionará formando una costra. La placa se calcifica y se forma el sarro.

El sarro, cuando se forma, es de color blanquecino pero a medida que pasa el tiempo se va poniendo amarillo y luego marrón.

Síntomas de una pobre higiene dental
La señal más obvia de una mala salud dental canina es el mal aliento.

Sin embargo, a veces no es tan fácil de detectar
Y hay perros que no se dejan abrir la boca por su dueño. Por ejemplo…

Recientemente nos trajeron a la clínica a un perro que parpadeaba de un ojo y decía su dueño que le picaba un lado de la cara. Tenía molestias y dificultad para comer, lo que había llevado a sus dueños a comprarle comida blanda (que suele ser un poco más cara y llevar más contenido en grasa) durante medio año. Después de una exploración oftalmológica, nos dimos cuenta de que el ojo tenía una úlcera en la córnea probablemente de rascarse . Además, el canto lateral del ojo estaba inflamado. Tenía lo que en humanos llamamos flemón pero como era un perro de pelo largo, no se le notaba a simple vista. Al abrirle la boca nos llamó la atención el ver una muela llena de sarro. Le realizamos una radiografía y encontramos una fístula que llegaba hasta la parte inferior del ojo.

Le tuvimos que extraer la muela. Tras esto, el ojo se curó completamente con unos colirios y una lentilla protectora de úlcera. Afortunadamente, la úlcera no profundizó y no perforó el ojo. Ahora el perro come perfectamente a pesar de haber perdido una muela.

¿Cómo mantener la higiene dental de tu perro?
Hay varias maneras de prevenir problemas derivados de la salud dental de tu perro.

Limpiezas de dientes en casa
Es recomendable limpiar los dientes de tu perro semanal o diariamente si se puede. Existe una gran variedad de productos que se pueden utilizar:

Pastas de dientes.
Cepillos de dientes o dedales para el dedo índice, que hacen más fácil la limpieza.
Colutorios para echar en agua de bebida o directamente sobre el diente en líquido o en spray.

En la Clínica Tus Veterinarios enseñamos a nuestros clientes a tomar el hábito de limpiar los dientes de sus perros desde que son cachorros. Esto responde a nuestro compromiso con la prevención de enfermedades caninas.

Hoy en día tenemos muchos clientes que limpian los dientes todos los días a su mascota, y como resultado, se ahorran el dinero de hacer limpiezas dentales profesionales y consiguen una mejor salud de su perro.


Limpiezas dentales profesionales de perros y gatos

Recomendamos hacer una limpieza dental especializada anualmente. La realizamos con un aparato de ultrasonidos que utiliza agua para quitar el sarro. Después, procedemos a pulir los dientes con un cepillo de alta velocidad y una pasta especial. Hacemos esto para proteger el esmalte.

La frecuencia de limpiezas dentales necesaria varía mucho entre razas. En general, las razas grandes tienen buena calidad de esmalte, por lo que no necesitan hacerlo tan a menudo e incluso pueden pasarse la vida sin requerir una limpieza. Sin embargo, razas pequeñas como el Yorkshire o el Maltés, deben hacérselas todos los años desde cachorros si se quiere conservar sus piezas dentales.

Otro factor fundamental es la calidad del pienso. Algunas marcas han diseñado croquetas que limpian la superficie del diente y de la muela al masticarse.

Ultrasonido para perros

¿Se necesita anestesia para las limpiezas dentales de perros y gatos?

La limpieza dental en perros no es una técnica que pueda practicarse sin anestesia general , aunque hay veces que los propietarios no quieren anestesiar y si tiene poco sarro y el perro es muy bueno se puede intentar…… , pero no se va a poder pulir ni acceder a todas la zona de la boca …. Además los limpiadores dentales van a irrigar agua y hay riesgo de aspiración a vías respiratorias si no se realiza una anestesia correcta con intubación traqueal . En resumen , sin anestesia no se va hacer una correcta limpieza dental.

Tampoco sirve la sedación ya que necesitamos que el animal esté totalmente quieto, y el veterinario tenga un acceso completo a todas sus piezas dentales y encías.

Alimentos para la limpieza dental

Hay que tener cierto cuidado a la hora de comprar determinados alimentos porque no todos son saludables. Algunos tienen demasiado contenido graso, que en exceso puede causar problemas cardiovasculares y obesidad.

Los mejores alimentos para los dientes son aquellos que están elaborados por empresas farmacéuticas y llevan componentes químicos con tratamientos específicos para el diente del perro. Esto implica no solo limpieza a través de la acción mecánica de morder sino también un tratamiento antibacteriano para prevenir el sarro.

Conclusión

Si eres como la mayoría de dueños, por falta de tiempo , es probable que no estés prestando la suficiente atención a la limpieza dental de tu perro. Por eso te animamos a que comiences a limpiar los dientes de tu perro y consideres atender a su higiene bucal con frecuencia.

Estas simples medidas pueden conllevar a que tu perro tenga una vida más larga y mucho más saludable.

Si te resulta imposible introducir un cepillo de dientes a tu perro en la boca, pásate con él por clínica Tus Veterinarios y te explicamos cómo hacerlo.

Necesitas hacer una limpieza dental profesional a tu mascota?
Llámanos al 622575274 o contacta con nosotros

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

¡Hola!