| Current File : //lib/modules/6.8.0-59-generic/build/arch/mips/include/asm/sibyte/bcm1480_regs.h |
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* *********************************************************************
* BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
*
* Register Definitions File: bcm1480_regs.h
*
* This module contains the addresses of the on-chip peripherals
* on the BCM1280 and BCM1480.
*
* BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
*
*********************************************************************
*
* Copyright 2000,2001,2002,2003
* Broadcom Corporation. All rights reserved.
*
********************************************************************* */
#ifndef _BCM1480_REGS_H
#define _BCM1480_REGS_H
#include <asm/sibyte/sb1250_defs.h>
/* *********************************************************************
* Pull in the BCM1250's registers since a great deal of the 1480's
* functions are the same as the BCM1250.
********************************************************************* */
#include <asm/sibyte/sb1250_regs.h>
/* *********************************************************************
* Some general notes:
*
* Register addresses are grouped by function and follow the order
* of the User Manual.
*
* For the most part, when there is more than one peripheral
* of the same type on the SOC, the constants below will be
* offsets from the base of each peripheral. For example,
* the MAC registers are described as offsets from the first
* MAC register, and there will be a MAC_REGISTER() macro
* to calculate the base address of a given MAC.
*
* The information in this file is based on the BCM1X55/BCM1X80
* User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
*
* This file is basically a "what's new" header file. Since the
* BCM1250 and the new BCM1480 (and derivatives) share many common
* features, this file contains only what's new or changed from
* the 1250. (above, you can see that we include the 1250 symbols
* to get the base functionality).
*
* In software, be sure to use the correct symbols, particularly
* for blocks that are different between the two chip families.
* All BCM1480-specific symbols have _BCM1480_ in their names,
* and all BCM1250-specific and "base" functions that are common in
* both chips have no special names (this is for compatibility with
* older include files). Therefore, if you're working with the
* SCD, which is very different on each chip, A_SCD_xxx implies
* the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
* version.
********************************************************************* */
/* *********************************************************************
* Memory Controller Registers (Section 6)
********************************************************************* */
#define A_BCM1480_MC_BASE_0 0x0010050000
#define A_BCM1480_MC_BASE_1 0x0010051000
#define A_BCM1480_MC_BASE_2 0x0010052000
#define A_BCM1480_MC_BASE_3 0x0010053000
#define BCM1480_MC_REGISTER_SPACING 0x1000
#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
#define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg))
#define R_BCM1480_MC_CONFIG 0x0000000100
#define R_BCM1480_MC_CS_START 0x0000000120
#define R_BCM1480_MC_CS_END 0x0000000140
#define S_BCM1480_MC_CS_STARTEND 24
#define R_BCM1480_MC_CS01_ROW0 0x0000000180
#define R_BCM1480_MC_CS01_ROW1 0x00000001A0
#define R_BCM1480_MC_CS23_ROW0 0x0000000200
#define R_BCM1480_MC_CS23_ROW1 0x0000000220
#define R_BCM1480_MC_CS01_COL0 0x0000000280
#define R_BCM1480_MC_CS01_COL1 0x00000002A0
#define R_BCM1480_MC_CS23_COL0 0x0000000300
#define R_BCM1480_MC_CS23_COL1 0x0000000320
#define R_BCM1480_MC_CSX_BASE 0x0000000180
#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */
#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */
#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */
#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */
#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */
#define R_BCM1480_MC_CS01_BA 0x0000000380
#define R_BCM1480_MC_CS23_BA 0x00000003A0
#define R_BCM1480_MC_DRAMCMD 0x0000000400
#define R_BCM1480_MC_DRAMMODE 0x0000000420
#define R_BCM1480_MC_CLOCK_CFG 0x0000000440
#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG
#define R_BCM1480_MC_TEST_DATA 0x0000000480
#define R_BCM1480_MC_TEST_ECC 0x00000004A0
#define R_BCM1480_MC_TIMING1 0x00000004C0
#define R_BCM1480_MC_TIMING2 0x00000004E0
#define R_BCM1480_MC_DLL_CFG 0x0000000500
#define R_BCM1480_MC_DRIVE_CFG 0x0000000520
#if SIBYTE_HDR_FEATURE(1480, PASS2)
#define R_BCM1480_MC_ODT 0x0000000460
#define R_BCM1480_MC_ECC_STATUS 0x0000000540
#endif
/* Global registers (single instance) */
#define A_BCM1480_MC_GLB_CONFIG 0x0010054100
#define A_BCM1480_MC_GLB_INTLV 0x0010054120
#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140
#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160
#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180
#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0
/* *********************************************************************
* L2 Cache Control Registers (Section 5)
********************************************************************* */
#define A_BCM1480_L2_BASE 0x0010040000
#define A_BCM1480_L2_READ_TAG 0x0010040018
#define A_BCM1480_L2_ECC_TAG 0x0010040038
#define A_BCM1480_L2_MISC0_VALUE 0x0010040058
#define A_BCM1480_L2_MISC1_VALUE 0x0010040078
#define A_BCM1480_L2_MISC2_VALUE 0x0010040098
#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */
#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */
#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */
#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */
#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */
#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */
#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */
#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */
#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */
#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */
#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8))
#define A_BCM1480_L2_BANK_BASE 0x00D0300000
#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000
/* *********************************************************************
* PCI-X Interface Registers (Section 7)
********************************************************************* */
#define A_BCM1480_PCI_BASE 0x0010061400
#define A_BCM1480_PCI_RESET 0x0010061400
#define A_BCM1480_PCI_DLL 0x0010061500
#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000
/* *********************************************************************
* Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
********************************************************************* */
/* No register changes with Rev.C BCM1250, but one additional MAC */
#define A_BCM1480_MAC_BASE_2 0x0010066000
#ifndef A_MAC_BASE_2
#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2
#endif
#define A_BCM1480_MAC_BASE_3 0x0010067000
#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3
#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038
#ifndef R_MAC_DMA_OODPKTLOST
#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST
#endif
/* *********************************************************************
* DUART Registers (Section 14)
********************************************************************* */
/* No significant differences from BCM1250, two DUARTs */
/* Conventions, per user manual:
* DUART generic, channels A,B,C,D
* DUART0 implementing channels A,B
* DUART1 inplementing channels C,D
*/
#define BCM1480_DUART_NUM_PORTS 4
#define A_BCM1480_DUART0 0x0010060000
#define A_BCM1480_DUART1 0x0010060400
#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
#define BCM1480_DUART_CHANREG_SPACING 0x100
#define A_BCM1480_DUART_CHANREG(chan, reg) \
(A_BCM1480_DUART(chan) + \
BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
#define A_BCM1480_DUART_CTRLREG(chan, reg) \
(A_BCM1480_DUART(chan) + \
BCM1480_DUART_CHANREG_SPACING * 3 + (reg))
#define DUART_IMRISR_SPACING 0x20
#define DUART_INCHNG_SPACING 0x10
#define R_BCM1480_DUART_IMRREG(chan) \
(R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
#define R_BCM1480_DUART_ISRREG(chan) \
(R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
#define R_BCM1480_DUART_INCHREG(chan) \
(R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING)
#define A_BCM1480_DUART_IMRREG(chan) \
(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan)))
#define A_BCM1480_DUART_ISRREG(chan) \
(A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan)))
#define A_BCM1480_DUART_IN_PORT(chan) \
(A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT))
/*
* These constants are the absolute addresses.
*/
#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400
#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410
#define A_BCM1480_DUART_STATUS_C 0x0010060420
#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430
#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440
#define A_BCM1480_DUART_CMD_C 0x0010060450
#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460
#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470
#define A_BCM1480_DUART_OPCR_C 0x0010060480
#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490
#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500
#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510
#define A_BCM1480_DUART_STATUS_D 0x0010060520
#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530
#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540
#define A_BCM1480_DUART_CMD_D 0x0010060550
#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560
#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570
#define A_BCM1480_DUART_OPCR_D 0x0010060580
#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590
#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600
#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610
#define A_BCM1480_DUART_ISR_C 0x0010060620
#define A_BCM1480_DUART_IMR_C 0x0010060630
#define A_BCM1480_DUART_ISR_D 0x0010060640
#define A_BCM1480_DUART_IMR_D 0x0010060650
#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660
#define A_BCM1480_DUART_OPCR_CD 0x0010060670
#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680
#define A_BCM1480_DUART_ISR_CD 0x0010060690
#define A_BCM1480_DUART_IMR_CD 0x00100606A0
#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0
#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0
#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0
#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0
/* *********************************************************************
* Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
********************************************************************* */
#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58
#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68
/* *********************************************************************
* GPIO Registers (Section 17)
********************************************************************* */
/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78
#define R_BCM1480_GPIO_INT_ADD_TYPE (-8)
#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE
#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE
/* *********************************************************************
* SMBus Registers (Section 18)
********************************************************************* */
/* No changes from BCM1250 */
/* *********************************************************************
* Timer Registers (Sections 4.6)
********************************************************************* */
/* BCM1480 has two additional watchdogs */
/* Watchdog timers */
#define A_BCM1480_SCD_WDOG_2 0x0010022050
#define A_BCM1480_SCD_WDOG_3 0x0010022150
#define BCM1480_SCD_NUM_WDOGS 4
#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050
#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058
#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060
#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150
#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158
#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160
/* BCM1480 has two additional compare registers */
#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10
#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18
/* *********************************************************************
* System Control Registers (Section 4.2)
********************************************************************* */
/* Scratch register in different place */
#define A_BCM1480_SCD_SCRATCH 0x100200A0
/* *********************************************************************
* System Address Trap Registers (Section 4.9)
********************************************************************* */
/* No changes from BCM1250 */
/* *********************************************************************
* System Interrupt Mapper Registers (Sections 4.3-4.5)
********************************************************************* */
#define A_BCM1480_IMR_CPU0_BASE 0x0010020000
#define A_BCM1480_IMR_CPU1_BASE 0x0010022000
#define A_BCM1480_IMR_CPU2_BASE 0x0010024000
#define A_BCM1480_IMR_CPU3_BASE 0x0010026000
#define BCM1480_IMR_REGISTER_SPACING 0x2000
#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13
#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
/* Most IMR registers are 128 bits, implemented as non-contiguous
64-bit registers high (_H) and low (_L) */
#define BCM1480_IMR_HL_SPACING 0x1000
#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010
#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018
#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020
#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028
#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038
#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048
#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0
#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8
#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0
#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0
#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8
#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0
#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100
#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8
#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200
#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64
#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010
#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018
#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020
#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028
#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038
#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100
#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200
#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300
#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100
#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
(cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000
#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008
/*
* these macros work together to build the address of a mailbox
* register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
* for mbox_0_set_cpu2 returns 0x00100240C8
*/
#define R_BCM1480_IMR_MAILBOX_CPU 0x00
#define R_BCM1480_IMR_MAILBOX_SET 0x08
#define R_BCM1480_IMR_MAILBOX_CLR 0x10
#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \
(A_BCM1480_IMR_CPU0_BASE + \
(num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
(cpu * BCM1480_IMR_REGISTER_SPACING) + \
(R_BCM1480_IMR_MAILBOX_0_CPU + reg))
/* *********************************************************************
* System Performance Counter Registers (Section 4.7)
********************************************************************* */
/* BCM1480 has four more performance counter registers, and two control
registers. */
#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0
#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0
#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0
#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8
#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1
#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0
#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1
#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2
#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3
#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0
#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8
#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
#define BCM1480_SCD_NUM_PERF_CNT 8
#define BCM1480_SCD_PERF_CNT_SPACING 8
#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
/* *********************************************************************
* System Bus Watcher Registers (Section 4.8)
********************************************************************* */
/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8
/* *********************************************************************
* System Debug Controller Registers (Section 19)
********************************************************************* */
/* Same as 1250 */
/* *********************************************************************
* System Trace Unit Registers (Sections 4.10)
********************************************************************* */
/* Same as 1250 */
/* *********************************************************************
* Data Mover DMA Registers (Section 10.7)
********************************************************************* */
/* Same as 1250 */
/* *********************************************************************
* HyperTransport Interface Registers (Section 8)
********************************************************************* */
#define BCM1480_HT_NUM_PORTS 3
#define BCM1480_HT_PORT_SPACING 0x800
#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000
#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800
#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000
#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000
/* *********************************************************************
* Node Controller Registers (Section 9)
********************************************************************* */
#define A_BCM1480_NC_BASE 0x00DFBD0000
#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000
#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020
#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040
#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060
#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080
#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0
#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0
#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0
#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100
#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120
#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140
#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200
#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220
#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240
#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260
#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280
#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0
#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0
#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0
#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300
#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320
#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000
#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020
#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040
#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060
#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
/* *********************************************************************
* H&R Block Configuration Registers (Section 12.4)
********************************************************************* */
#define A_BCM1480_HR_BASE_0 0x00DF820000
#define A_BCM1480_HR_BASE_1 0x00DF8A0000
#define A_BCM1480_HR_BASE_2 0x00DF920000
#define BCM1480_HR_REGISTER_SPACING 0x80000
#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg))
#define R_BCM1480_HR_CFG 0x0000000000
#define R_BCM1480_HR_MAPPING 0x0000010010
#define BCM1480_HR_RULE_SPACING 0x0000000010
#define BCM1480_HR_NUM_RULES 16
#define BCM1480_HR_OP_OFFSET 0x0000000100
#define BCM1480_HR_TYPE_OFFSET 0x0000000108
#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
#define BCM1480_HR_LEAF_SPACING 0x0000000010
#define BCM1480_HR_NUM_LEAVES 10
#define BCM1480_HR_LEAF_OFFSET 0x0000000300
#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
#define R_BCM1480_HR_EX_LEAF0 0x00000003A0
#define BCM1480_HR_PATH_SPACING 0x0000000010
#define BCM1480_HR_NUM_PATHS 16
#define BCM1480_HR_PATH_OFFSET 0x0000000600
#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700
#define BCM1480_HR_ROUTE_SPACING 8
#define BCM1480_HR_NUM_ROUTES 512
#define BCM1480_HR_ROUTE_OFFSET 0x0000001000
#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
/* checked to here - ehs */
/* *********************************************************************
* Packet Manager DMA Registers (Section 12.5)
********************************************************************* */
#define A_BCM1480_PM_BASE 0x0010056000
#define A_BCM1480_PMI_LCL_0 0x0010058000
#define A_BCM1480_PMO_LCL_0 0x001005C000
#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
#define BCM1480_PM_LCL_REGISTER_SPACING 0x100
#define BCM1480_PM_NUM_CHANNELS 32
#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
#define BCM1480_PM_INT_PACKING 8
#define BCM1480_PM_INT_FUNCTION_SPACING 0x40
#define BCM1480_PM_INT_NUM_FUNCTIONS 3
/*
* DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
*/
#define R_BCM1480_PM_BASE_SIZE 0x0000000000
#define R_BCM1480_PM_CNT 0x0000000008
#define R_BCM1480_PM_PFCNT 0x0000000010
#define R_BCM1480_PM_LAST 0x0000000018
#define R_BCM1480_PM_PFINDX 0x0000000020
#define R_BCM1480_PM_INT_WMK 0x0000000028
#define R_BCM1480_PM_CONFIG0 0x0000000030
#define R_BCM1480_PM_LOCALDEBUG 0x0000000078
#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */
#define R_BCM1480_PM_INT_CNFG 0x0000000088
#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090
#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */
#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */
/*
* Global Registers (Not Channelized)
*/
#define A_BCM1480_PMI_GLB_0 0x0010056000
#define A_BCM1480_PMO_GLB_0 0x0010057000
/*
* PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
*/
#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */
#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
/*
* Interrupt mapping registers
*/
#define A_BCM1480_PMI_INT_0 0x0010056800
#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
#define A_BCM1480_PMO_INT_0 0x0010057800
#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
/*
* Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
*/
#define R_BCM1480_PM_INT_ST 0x0000000000
#define R_BCM1480_PM_INT_MSK 0x0000000040
#define R_BCM1480_PM_INT_CLR 0x0000000080
#define R_BCM1480_PM_MRGD_INT 0x00000000C0
/*
* Debug registers (global)
*/
#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000
#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8
#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8
#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000
#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8
#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8
/* *********************************************************************
* Switch performance counters
********************************************************************* */
#define A_BCM1480_SWPERF_CFG 0xdfb91800
#define A_BCM1480_SWPERF_CNT0 0xdfb91880
#define A_BCM1480_SWPERF_CNT1 0xdfb91888
#define A_BCM1480_SWPERF_CNT2 0xdfb91890
#define A_BCM1480_SWPERF_CNT3 0xdfb91898
/* *********************************************************************
* Switch Trace Unit
********************************************************************* */
#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000
#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100
#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108
#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200
#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208
#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300
#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400
#define A_BCM1480_SWTRC_CFG 0xDFB91500
#define A_BCM1480_SWTRC_READ 0xDFB91508
#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000
#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
/* *********************************************************************
* High-Speed Port Registers (Section 13)
********************************************************************* */
#define A_BCM1480_HSP_BASE_0 0x00DF810000
#define A_BCM1480_HSP_BASE_1 0x00DF890000
#define A_BCM1480_HSP_BASE_2 0x00DF910000
#define BCM1480_HSP_REGISTER_SPACING 0x80000
#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
#define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg))
#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000
#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008
#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020
#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200
#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208
#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800
#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808
#define R_BCM1480_HSP_RX_TEST 0x0000000810
#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818
#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820
#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828
#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830
#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838
#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050
#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058
#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
/* XXX Following registers were shuffled. Renamed/renumbered per errata. */
#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078
#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080
#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088
#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090
#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098
#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8
#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8
#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8
#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0
#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8
#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0
#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8
#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100
#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108
#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110
#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118
#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120
#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000
#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008
#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050
#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058
#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078
#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080
#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088
#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090
#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098
#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8
#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0
#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8
#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100
#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108
#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200
#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208
#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800
#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808
#define R_BCM1480_HSP_TX_TEST 0x0000040810
#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840
#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848
#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850
#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860
#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868
#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870
#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878
#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888
#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
/* *********************************************************************
* Physical Address Map (Table 10 and Figure 7)
********************************************************************* */
#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000)
#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000)
#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000)
#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000)
#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000)
#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000)
#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000)
#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000)
#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000)
#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000)
#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000)
#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000)
#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000)
#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000)
#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000)
#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000)
#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000)
#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000)
#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000)
#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000)
#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000)
#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000)
/* *********************************************************************
* L2 Cache as RAM (Table 54)
********************************************************************* */
#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8
#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000)
#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000)
#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000)
#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000)
#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000)
#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000)
#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000)
#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000)
#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000)
#endif /* _BCM1480_REGS_H */