| Current File : //lib/modules/6.8.0-59-generic/build/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h |
/*
*
* BRIEF MODULE DESCRIPTION
* Include file for Alchemy Semiconductor's Au1550 Descriptor
* Based DMA Controller.
*
* Copyright 2004 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* Specifics for the Au1xxx Descriptor-Based DMA Controller,
* first seen in the AU1550 part.
*/
#ifndef _AU1000_DBDMA_H_
#define _AU1000_DBDMA_H_
#ifndef _LANGUAGE_ASSEMBLY
typedef volatile struct dbdma_global {
u32 ddma_config;
u32 ddma_intstat;
u32 ddma_throttle;
u32 ddma_inten;
} dbdma_global_t;
/* General Configuration. */
#define DDMA_CONFIG_AF (1 << 2)
#define DDMA_CONFIG_AH (1 << 1)
#define DDMA_CONFIG_AL (1 << 0)
#define DDMA_THROTTLE_EN (1 << 31)
/* The structure of a DMA Channel. */
typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
u32 ddma_statptr; /* word aligned pointer to status word */
u32 ddma_dbell; /* A write activates channel operation */
u32 ddma_irq; /* If bit 0 set, interrupt pending */
u32 ddma_stat; /* See below */
u32 ddma_bytecnt; /* Byte count, valid only when chan idle */
/* Remainder, up to the 256 byte boundary, is reserved. */
} au1x_dma_chan_t;
#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */
#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */
#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */
#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */
#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */
#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */
#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */
#define DDMA_CFG_SBE (1 << 2) /* Source big endian */
#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */
#define DDMA_CFG_EN (1 << 0) /* Channel enable */
/*
* Always set when descriptor processing done, regardless of
* interrupt enable state. Reflected in global intstat, don't
* clear this until global intstat is read/used.
*/
#define DDMA_IRQ_IN (1 << 0)
#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */
#define DDMA_STAT_V (1 << 1) /* Descriptor valid */
#define DDMA_STAT_H (1 << 0) /* Channel Halted */
/*
* "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
typedef volatile struct au1xxx_ddma_desc {
u32 dscr_cmd0; /* See below */
u32 dscr_cmd1; /* See below */
u32 dscr_source0; /* source phys address */
u32 dscr_source1; /* See below */
u32 dscr_dest0; /* Destination address */
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
/*
* First 32 bytes are HW specific!!!
* Let's have some SW data following -- make sure it's 32 bytes.
*/
u32 sw_status;
u32 sw_context;
u32 sw_reserved[6];
} au1x_ddma_desc_t;
#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */
#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */
#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */
#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */
#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */
#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */
#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */
#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */
#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */
#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */
#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */
#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
#define SW_STATUS_INUSE (1 << 0)
/* Command 0 device IDs. */
#define AU1550_DSCR_CMD0_UART0_TX 0
#define AU1550_DSCR_CMD0_UART0_RX 1
#define AU1550_DSCR_CMD0_UART3_TX 2
#define AU1550_DSCR_CMD0_UART3_RX 3
#define AU1550_DSCR_CMD0_DMA_REQ0 4
#define AU1550_DSCR_CMD0_DMA_REQ1 5
#define AU1550_DSCR_CMD0_DMA_REQ2 6
#define AU1550_DSCR_CMD0_DMA_REQ3 7
#define AU1550_DSCR_CMD0_USBDEV_RX0 8
#define AU1550_DSCR_CMD0_USBDEV_TX0 9
#define AU1550_DSCR_CMD0_USBDEV_TX1 10
#define AU1550_DSCR_CMD0_USBDEV_TX2 11
#define AU1550_DSCR_CMD0_USBDEV_RX3 12
#define AU1550_DSCR_CMD0_USBDEV_RX4 13
#define AU1550_DSCR_CMD0_PSC0_TX 14
#define AU1550_DSCR_CMD0_PSC0_RX 15
#define AU1550_DSCR_CMD0_PSC1_TX 16
#define AU1550_DSCR_CMD0_PSC1_RX 17
#define AU1550_DSCR_CMD0_PSC2_TX 18
#define AU1550_DSCR_CMD0_PSC2_RX 19
#define AU1550_DSCR_CMD0_PSC3_TX 20
#define AU1550_DSCR_CMD0_PSC3_RX 21
#define AU1550_DSCR_CMD0_PCI_WRITE 22
#define AU1550_DSCR_CMD0_NAND_FLASH 23
#define AU1550_DSCR_CMD0_MAC0_RX 24
#define AU1550_DSCR_CMD0_MAC0_TX 25
#define AU1550_DSCR_CMD0_MAC1_RX 26
#define AU1550_DSCR_CMD0_MAC1_TX 27
#define AU1200_DSCR_CMD0_UART0_TX 0
#define AU1200_DSCR_CMD0_UART0_RX 1
#define AU1200_DSCR_CMD0_UART1_TX 2
#define AU1200_DSCR_CMD0_UART1_RX 3
#define AU1200_DSCR_CMD0_DMA_REQ0 4
#define AU1200_DSCR_CMD0_DMA_REQ1 5
#define AU1200_DSCR_CMD0_MAE_BE 6
#define AU1200_DSCR_CMD0_MAE_FE 7
#define AU1200_DSCR_CMD0_SDMS_TX0 8
#define AU1200_DSCR_CMD0_SDMS_RX0 9
#define AU1200_DSCR_CMD0_SDMS_TX1 10
#define AU1200_DSCR_CMD0_SDMS_RX1 11
#define AU1200_DSCR_CMD0_AES_TX 13
#define AU1200_DSCR_CMD0_AES_RX 12
#define AU1200_DSCR_CMD0_PSC0_TX 14
#define AU1200_DSCR_CMD0_PSC0_RX 15
#define AU1200_DSCR_CMD0_PSC1_TX 16
#define AU1200_DSCR_CMD0_PSC1_RX 17
#define AU1200_DSCR_CMD0_CIM_RXA 18
#define AU1200_DSCR_CMD0_CIM_RXB 19
#define AU1200_DSCR_CMD0_CIM_RXC 20
#define AU1200_DSCR_CMD0_MAE_BOTH 21
#define AU1200_DSCR_CMD0_LCD 22
#define AU1200_DSCR_CMD0_NAND_FLASH 23
#define AU1200_DSCR_CMD0_PSC0_SYNC 24
#define AU1200_DSCR_CMD0_PSC1_SYNC 25
#define AU1200_DSCR_CMD0_CIM_SYNC 26
#define AU1300_DSCR_CMD0_UART0_TX 0
#define AU1300_DSCR_CMD0_UART0_RX 1
#define AU1300_DSCR_CMD0_UART1_TX 2
#define AU1300_DSCR_CMD0_UART1_RX 3
#define AU1300_DSCR_CMD0_UART2_TX 4
#define AU1300_DSCR_CMD0_UART2_RX 5
#define AU1300_DSCR_CMD0_UART3_TX 6
#define AU1300_DSCR_CMD0_UART3_RX 7
#define AU1300_DSCR_CMD0_SDMS_TX0 8
#define AU1300_DSCR_CMD0_SDMS_RX0 9
#define AU1300_DSCR_CMD0_SDMS_TX1 10
#define AU1300_DSCR_CMD0_SDMS_RX1 11
#define AU1300_DSCR_CMD0_AES_TX 12
#define AU1300_DSCR_CMD0_AES_RX 13
#define AU1300_DSCR_CMD0_PSC0_TX 14
#define AU1300_DSCR_CMD0_PSC0_RX 15
#define AU1300_DSCR_CMD0_PSC1_TX 16
#define AU1300_DSCR_CMD0_PSC1_RX 17
#define AU1300_DSCR_CMD0_PSC2_TX 18
#define AU1300_DSCR_CMD0_PSC2_RX 19
#define AU1300_DSCR_CMD0_PSC3_TX 20
#define AU1300_DSCR_CMD0_PSC3_RX 21
#define AU1300_DSCR_CMD0_LCD 22
#define AU1300_DSCR_CMD0_NAND_FLASH 23
#define AU1300_DSCR_CMD0_SDMS_TX2 24
#define AU1300_DSCR_CMD0_SDMS_RX2 25
#define AU1300_DSCR_CMD0_CIM_SYNC 26
#define AU1300_DSCR_CMD0_UDMA 27
#define AU1300_DSCR_CMD0_DMA_REQ0 28
#define AU1300_DSCR_CMD0_DMA_REQ1 29
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
/* This macro is used to find/create custom device types */
#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
((d) & 0xFF))
#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF)
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
/* Source/Destination transfer width. */
#define DSCR_CMD0_BYTE 0
#define DSCR_CMD0_HALFWORD 1
#define DSCR_CMD0_WORD 2
#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18)
#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16)
/* DDMA Descriptor Type. */
#define DSCR_CMD0_STANDARD 0
#define DSCR_CMD0_LITERAL 1
#define DSCR_CMD0_CMP_BRANCH 2
#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13)
/* Status Instruction. */
#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */
#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */
#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */
#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */
#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0)
/* Descriptor Command 1. */
#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */
#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */
#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */
#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */
/* Flag description. */
#define DSCR_CMD1_FL_MEM_STRIDE0 0
#define DSCR_CMD1_FL_MEM_STRIDE1 1
#define DSCR_CMD1_FL_MEM_STRIDE2 2
#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22)
/* Source1, 1-dimensional stride. */
#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */
#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */
#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */
#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14)
#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */
#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0)
/* Dest1, 1-dimensional stride. */
#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */
#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */
#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */
#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14)
#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */
#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0)
#define DSCR_xTS_SIZE1 0
#define DSCR_xTS_SIZE2 1
#define DSCR_xTS_SIZE4 2
#define DSCR_xTS_SIZE8 3
#define DSCR_SRC1_STS(x) (((x) & 3) << 30)
#define DSCR_DEST1_DTS(x) (((x) & 3) << 30)
#define DSCR_xAM_INCREMENT 0
#define DSCR_xAM_DECREMENT 1
#define DSCR_xAM_STATIC 2
#define DSCR_xAM_BURST 3
#define DSCR_SRC1_SAM(x) (((x) & 3) << 28)
#define DSCR_DEST1_DAM(x) (((x) & 3) << 28)
/* The next descriptor pointer. */
#define DSCR_NXTPTR_MASK (0x07ffffff)
#define DSCR_NXTPTR(x) ((x) >> 5)
#define DSCR_GET_NXTPTR(x) ((x) << 5)
#define DSCR_NXTPTR_MS (1 << 27)
/* The number of DBDMA channels. */
#define NUM_DBDMA_CHANS 16
/*
* DDMA API definitions
* FIXME: may not fit to this header file
*/
typedef struct dbdma_device_table {
u32 dev_id;
u32 dev_flags;
u32 dev_tsize;
u32 dev_devwidth;
u32 dev_physaddr; /* If FIFO */
u32 dev_intlevel;
u32 dev_intpolarity;
} dbdev_tab_t;
typedef struct dbdma_chan_config {
spinlock_t lock;
u32 chan_flags;
u32 chan_index;
dbdev_tab_t *chan_src;
dbdev_tab_t *chan_dest;
au1x_dma_chan_t *chan_ptr;
au1x_ddma_desc_t *chan_desc_base;
u32 cdb_membase; /* kmalloc base of above */
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
void (*chan_callback)(int, void *);
} chan_tab_t;
#define DEV_FLAGS_INUSE (1 << 0)
#define DEV_FLAGS_ANYUSE (1 << 1)
#define DEV_FLAGS_OUT (1 << 2)
#define DEV_FLAGS_IN (1 << 3)
#define DEV_FLAGS_BURSTABLE (1 << 4)
#define DEV_FLAGS_SYNC (1 << 5)
/* end DDMA API definitions */
/*
* External functions for drivers to use.
* Use this to allocate a DBDMA channel. The device IDs are one of
* the DSCR_CMD0 devices IDs, which is usually redefined to a more
* meaningful name. The 'callback' is called during DMA completion
* interrupt.
*/
extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *),
void *callparam);
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
/* Set the device width of an in/out FIFO. */
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
/* Allocate a ring of descriptors for DBDMA. */
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
/* Put buffers on source/destination descriptors. */
u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
/* Get a buffer from the destination descriptor. */
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
void au1xxx_dbdma_stop(u32 chanid);
void au1xxx_dbdma_start(u32 chanid);
void au1xxx_dbdma_reset(u32 chanid);
u32 au1xxx_get_dma_residue(u32 chanid);
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
extern void au1xxx_ddma_del_device(u32 devid);
void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
* Flags for the put_source/put_dest functions.
*/
#define DDMA_FLAGS_IE (1 << 0)
#define DDMA_FLAGS_NOIE (1 << 1)
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */