| Current File : //usr/share/webmin/phpini/phpini-lib.pl |
# Functions for managing the PHP configuration file
BEGIN { push(@INC, ".."); };
use WebminCore;
&init_config();
%access = &get_module_acl();
# Fix language strings that refer to MySQL
if (&foreign_check("mysql")) {
&foreign_require("mysql");
&mysql::fix_mysql_text(\%text);
}
# get_config_fmt(file)
# Returns a format code for php.ini or FPM config files
sub get_config_fmt
{
local ($file) = @_;
return $file =~ /\.conf$/ ? "fpm" : "ini";
}
# get_config([file])
# Returns an array ref of PHP configuration directives from some file
sub get_config
{
local ($file) = @_;
$file ||= &get_default_php_ini();
local $fmt = &get_config_fmt($file);
if (!defined($get_config_cache{$file})) {
local @rv = ( );
local $lnum = 0;
local $section;
open(CONFIG, "<".$file) || return undef;
if ($fmt eq "ini") {
# Classic php.ini format
while(<CONFIG>) {
s/\r|\n//g;
s/\s+$//;
local $uq;
if (/^(;?)\s*(\S+)\s*=\s*"(.*)"/ ||
/^(;?)\s*(\S+)\s*=\s*'(.*)'/ ||
($uq = ($_ =~ /^(;?)\s*(\S+)\s*=\s*(.*)/))) {
# Found a variable (php.ini format)
push(@rv, { 'name' => $2,
'value' => $3,
'enabled' => !$1,
'line' => $lnum,
'file' => $file,
'section' => $section,
'fmt' => $fmt,
});
if ($uq) {
# Remove any comments
$rv[$#rv]->{'value'} =~ s/\s+;.*$//;
}
}
elsif (/^\[(.*)\]/) {
# A new section
$section = $1;
}
$lnum++;
}
}
else {
# FPM config file format, with php options
while(<CONFIG>) {
s/\r|\n//g;
s/\s+$//;
if (/^(;?)(php_admin_value|php_value)\[(\S+)\]\s*=\s*(.*)/) {
# Found an FPM config that sets a PHP variable
push(@rv, { 'name' => $3,
'value' => $4,
'admin' => $2 eq "php_admin_value" ? 1 : 0,
'enabled' => !$1,
'line' => $lnum,
'file' => $file,
'fmt' => $fmt,
});
}
$lnum++;
}
}
close(CONFIG);
$get_config_cache{$file} = \@rv;
}
return $get_config_cache{$file};
}
# find(name, &config, [disabled-mode])
# Look up a directive by name
sub find
{
local ($name, $conf, $mode) = @_;
local @rv = grep { lc($_->{'name'}) eq lc($name) &&
($mode == 0 && $_->{'enabled'} ||
$mode == 1 && !$_->{'enabled'} ||
$mode == 2) } @$conf;
return wantarray ? @rv : $rv[0];
}
sub find_value
{
local @rv = map { $_->{'value'} } &find(@_);
return $rv[0];
}
# save_directive(&config, name, [value|&values], [newsection], [neverquote])
# Updates a single entry in the PHP config file
sub save_directive
{
local ($conf, $name, $values, $newsection, $noquote) = @_;
my @values = ref($values) ? @$values : ( $values );
$newsection ||= "PHP";
my @old = &find($name, $conf, 0);
my @cmt = &find($name, $conf, 1);
my $fmt = @old ? $old[0]->{'fmt'} : @$conf ? $conf->[0]->{'fmt'} : "fpm";
my $lref;
for(my $i=0; $i<@old || $i<@values; $i++) {
my $old = $i<@old ? $old[$i] : undef;
my $value = $i<@values ? $values[$i] : undef;
my $cmt = $i<@cmt ? $cmt[$i] : undef;
if ($fmt eq "ini") {
$newline = $name." = ".
($value !~ /\s/ || $noquote ? $value :
$value =~ /"/ ? "'$value'" : "\"$value\"");
}
else {
my $n = !$old || $old->{'admin'} ? "php_admin_value"
: "php_value";
$newline = $n."[".$name."] = ".$value;
}
if (defined($value) && $old) {
# Update existing value
$lref = &read_file_lines_as_user($old->{'file'});
$lref->[$old->{'line'}] = $newline;
$old->{'value'} = $value;
}
elsif (defined($value) && !$old && $cmt) {
# Update existing commented value
$lref = &read_file_lines_as_user($cmt->{'file'});
$lref->[$cmt->{'line'}] = $newline;
$cmt->{'value'} = $value;
$cmt->{'enabled'} = 1;
}
elsif (defined($value) && !$old && !$cmt) {
# Add a new value, at the end of the section
my ($lastline, $lastfile);
if ($fmt eq "ini") {
# Find last directive in requested php.ini section
my $last;
foreach my $c (@$conf) {
if ($c->{'section'} eq $newsection) {
$last = $c;
}
}
$last || &error("Could not find any values in ".
"section $newsection");
$lastfile = $last->{'file'};
$lastline = $last->{'line'};
$lref = &read_file_lines_as_user($lastfile);
}
else {
# Just add at the end
$lastfile = @$conf ? $conf->[0]->{'file'} : undef;
if (!$lastfile) {
my @allfiles = keys %get_config_cache;
$lastfile = $allfiles[0] if (@allfiles == 1);
}
$lastfile || &error("Don't know which file to add to");
$lref = &read_file_lines_as_user($lastfile);
$lastline = scalar(@$lref);
}
# Found last value in the section - add after it
splice(@$lref, $lastline+1, 0, $newline);
&renumber($conf, $lastline, 1);
push(@$conf, { 'name' => $name,
'value' => $value,
'enabled' => 1,
'file' => $lastfile,
'line' => $lastline+1,
'section' => $newsection,
});
}
elsif (!defined($value) && $old && $cmt) {
# Totally remove a value
$lref = &read_file_lines_as_user($old->{'file'});
splice(@$lref, $old->{'line'}, 1);
@$conf = grep { $_ ne $old } @$conf;
&renumber($conf, $old->{'line'}, -1);
}
elsif (!defined($value) && $old && !$cmt) {
# Turn a value into a comment
$lref = &read_file_lines_as_user($old->{'file'});
$old->{'enabled'} = 0;
$lref->[$old->{'line'}] = "; ".$lref->[$old->{'line'}];
}
}
}
sub renumber
{
local ($conf, $line, $oset) = @_;
foreach my $c (@$conf) {
$c->{'line'} += $oset if ($c->{'line'} > $line);
}
}
# can_php_config(file)
# Returns 1 if some config file can be edited
sub can_php_config
{
local ($file) = @_;
return &indexof($file, map { $_->[0] } &list_php_configs()) >= 0 ||
$access{'anyfile'};
}
# get_default_php_ini()
# Returns the first php.ini that exists
sub get_default_php_ini
{
local @inis = split(/\t+/, $config{'php_ini'});
foreach my $ai (@inis) {
local ($f, $d) = split(/=/, $ai);
local @f = glob($f);
return $f[0] if (@f && -r $f[0]);
}
if ($config{'alt_php_ini'} && -r $config{'alt_php_ini'} && @inis) {
# Fall back to default file
local ($f) = split(/=/, $inis[0]);
©_source_dest($config{'alt_php_ini'}, $f);
return $f;
}
return undef;
}
# list_php_configs()
# Returns a list of allowed config files and descriptions
sub list_php_configs
{
local @rv;
&get_default_php_ini(); # Force copy of sample ini file
# Add system-wide INI files
if ($access{'global'}) {
foreach my $ai (split(/\t+/, $config{'php_ini'})) {
local ($f, $d) = split(/=/, $ai);
foreach my $fp (split(/,/, $f)) {
foreach my $gf (glob($fp)) {
push(@rv, [ $gf, $d || $text{'file_global'} ]);
}
}
}
}
# Add INI files from ACL
foreach my $ai (split(/\t+/, $access{'php_inis'})) {
local ($f, $d) = split(/=/, $ai);
foreach my $fp (split(/,/, $f)) {
foreach my $gf (glob($fp)) {
push(@rv, [ $gf, $d || $gf ]);
}
}
}
# Convert dirs to files
foreach my $i (@rv) {
if (-d $i->[0] && -r "$i->[0]/php.ini") {
$i->[0] = "$i->[0]/php.ini";
}
}
# Add PHP INI files from Virtualmin
if ($access{'global'} && &foreign_check("virtual-server")) {
&foreign_require("virtual-server");
foreach my $v (&virtual_server::list_available_php_versions()) {
if ($v->[0]) {
my $ini = &virtual_server::get_global_php_ini($v->[0]);
push(@rv, [ $ini, "PHP $v->[0]" ]) if ($ini && -r $ini);
}
}
}
my %done;
return grep { !$done{$_->[0]}++ } @rv;
}
# get_php_ini_dir(file)
# Given a file like /etc/php.ini, return the include directory for additional
# .ini files that load modules, like /etc/php.d
sub get_php_ini_dir
{
my ($file) = @_;
my $file1 = $file;
my $file2 = $file;
my $file3 = $file;
$file1 =~ s/\/php.ini$/\/php.d/;
$file2 =~ s/\/php.ini$/\/conf.d/;
$file3 =~ s/\/php-fpm.conf$/\/php.d/;
return -d $file1 ? $file1 :
-d $file2 ? $file2 :
-d $file3 ? $file3 : undef;
}
# get_php_ini_binary(file)
# Given a php.ini path, try to guess the PHP command for it
# Examples:
# caller: get_php_binary_version("/etc/php/8.3/fpm/pool.d/www.conf");
# return: /bin/php8.3
#
# caller: get_php_binary_version("/etc/opt/remi/php81/php.ini");
# return: /bin/php81
#
# caller: get_php_binary_version("php7.4");
# return: /bin/php7.4 or /bin/php74
sub get_php_ini_binary
{
my ($file) = @_;
my $ver;
# Possible php.ini under domain's home dir
if (&foreign_check("virtual-server")) {
&foreign_require("virtual-server");
my %vmap = map { $_->[0], $_ }
&virtual_server::list_available_php_versions();
if ($file =~ /etc\/php(\S+)\/php.ini/) {
$ver = $1;
my $nodot = $ver;
$nodot =~ s/\.//g;
my $php = $vmap{$ver} || $vmap{$nodot};
if ($php && $php->[1]) {
my $binary = $php->[1];
$binary =~ s/-cgi//;
return $binary;
}
}
}
# Try to get version from the path, e.g.
# RHEL and derivatives /etc/opt/remi/php83
# Debian/Ubuntu /etc/php/8.3/fpm/pool.d/www.conf
# RHEL and derivatives Debian/Ubuntu
if ($file =~ /php(\d+)/ || $file =~ /php\/([\d\.]+)/) {
$ver = $1;
my $binary = &has_command("php$ver");
return $binary if ($binary);
}
# Given PHP version, e.g. `php7.4` as a string try to get binary
if ($file =~ /^php.*?([\d\.]+)$/) {
$ver = $1;
my $nodot = $ver;
$nodot =~ s/\.//g;
my $binary = &has_command("php$ver") ||
&has_command("php$nodot");
return $binary if ($binary);
}
return $ver ? undef : &has_command("php");
}
# get_php_ini_version(file)
# Given an ini file, return the version number for it if possible
sub get_php_ini_version
{
my ($file) = @_;
my $ver;
# Try to get version from the path, e.g.
# RHEL and derivatives /etc/opt/remi/php83
# Debian/Ubuntu /etc/php/8.3/fpm/pool.d/www.conf
# RHEL and derivatives Debian/Ubuntu
if ($file =~ /php(\d+)/ || $file =~ /php\/([\d\.]+)/) {
my $ver = $1;
$ver =~ s/^(\d)(\d+)$/$1.$2/;
return $ver;
}
# Given PHP version, e.g. `php7.4` as a string try to get binary
if ($file =~ /^php.*?([\d\.]+)$/) {
my $ver = $1;
$ver =~ s/^(\d)(\d+)$/$1.$2/;
return $ver;
}
return undef;
}
# get_php_binary_version(file|version-string)
# Given a php.ini path or binary, try to guess the
# PHP command and extract version for it
# Examples:
# caller: get_php_binary_version("/etc/php/8.3/fpm/pool.d/www.conf");
# return: 8.3.0
# caller: get_php_binary_version("/etc/opt/remi/php81/php.ini");
# return: 8.1.2
# caller: get_php_binary_version("php7.4");
# return: 7.4.33
sub get_php_binary_version
{
my ($file) = @_;
my $phpbinary = &get_php_ini_binary($file || $in{'file'});
return undef if (!$phpbinary);
my $phpver = &backquote_command("$phpbinary -v 2>&1");
if ($phpver =~ /(^|\n)PHP\s+([\d\.]+)/) {
return $2;
}
return undef;
}
# get_php_ini_bootup(file)
# Given an ini file, return the bootup action for it
sub get_php_ini_bootup
{
my ($file) = @_;
return undef if (!&foreign_installed("init"));
&foreign_require("init");
# Versioned PHP-FPM config, e.g. /etc/php/8.3/fpm/php.ini on Debian
# or /etc/opt/remi/php83/php-fpm.conf on EL systems
if ($file =~ /php(\d{1,2})/ || $file =~ /php\/(\d\.\d)/) {
my $shortver = $1;
my $nodot = $shortver;
$nodot =~ s/\.//;
foreach my $init ("php${shortver}-fpm",
"php-fpm${shortver}",
"rh-php${nodot}-php-fpm",
"php${nodot}-php-fpm") {
my $st = &init::action_status($init);
if ($st) {
return $init;
}
}
}
# Default /etc/php-fpm.conf config primarily on EL systems
elsif ($file =~ /\/(php-fpm)\.conf/) {
my $init = $1;
my $st = &init::action_status($init);
if ($st) {
return $init;
}
}
return undef;
}
# php_version_test_against(version, comparison-operator, [file|version-string])
# Given PHP version test if matches with currently installed or given
# Returns 1 if given version matches to the given and/or installed, 0 if not matches
#
# Examples:
# caller: php_version_test_against("7.4");
# return: 1 if version 7.4 is lower or equal to the current (current is 7.4.33)
# -----------------------------------------------------------------------------
# caller: php_version_test_against("7.3", undef, "/etc/opt/remi/php81/php.ini");
# return: 0 because version 7.3 is lower and not equal to found/instaled 8.1
# -----------------------------------------------------------------------------
# caller: php_version_test_against("7.4.33", undef, "php7.4.33");
# return: 1 because version 7.4.33 is lower or equal to found/instaled 7.4.33
# -----------------------------------------------------------------------------
# caller: php_version_test_against("7.4.33", undef, "php7.3.3");
# return: 0 because version 7.4.33 is greater found/instaled 7.3.3
# -----------------------------------------------------------------------------
# caller: php_version_test_against("7.3", undef, "php7.2");
# return: 0 because version 7.3 is greater found/instaled 7.2
# -----------------------------------------------------------------------------
# caller: php_version_test_against('7.4.33', '<=', 'php7.4');
# return: 1 for version 7.4.33 because PHP 7.4 is installed and version 7.4.33
# -----------------------------------------------------------------------------
# caller: php_version_test_against('7.4.34', '<=', 'php7.4');
# return: 0 because version 7.4.34 is not lower or equal than intalled (7.4.33)
sub php_version_test_against
{
my ($version, $cmp, $file) = @_;
my $curr_php = &get_php_binary_version($file);
return undef if (!$curr_php);
$cmp ||= '>=';
# Normalize the base version
if ($version =~ /^\d+\.\d+$/) {
# 7.4
$curr_php =~ s/(\d+\.\d+)(.*)/$1/;
}
if ($version =~ /^\d+$/) {
# 7
$curr_php =~ s/(\d+)(.*)/$1/;
}
if (&compare_version_numbers($version, $cmp, $curr_php)) {
return 1;
}
return 0;
}
# php_version_test_minimum(version, [file|version-string])
# Returns minimum version of PHP agaisnt installed or given
sub php_version_test_minimum
{
my ($version, $file) = @_;
return &php_version_test_against($version, '<=', $file);
}
# php_version_test_maximum(version, [file|version-string])
# Returns maximum version of PHP agaisnt installed or given
sub php_version_test_maximum
{
my ($version, $file) = @_;
return &php_version_test_against($version, '>=', $file);
}
# onoff_radio(name)
# Returns a field for editing a binary configuration value
sub onoff_radio
{
local ($name) = @_;
local $v = &find_value($name, $conf);
return &ui_radio($name, lc($v) eq "on" || lc($v) eq "true" ||
lc($v) eq "yes" || $v eq "1" ? "On" : $v ? "Off" : "",
[ [ "", $text{'default'} ],
[ "On", $text{'yes'} ],
[ "Off", $text{'no'} ] ]);
}
# graceful_apache_restart([file])
# Signal a graceful Apache restart, to pick up new php.ini settings
sub graceful_apache_restart
{
local ($file) = @_;
if (&foreign_installed("apache")) {
&foreign_require("apache", "apache-lib.pl");
if (&apache::is_apache_running() &&
$apache::httpd_modules{'core'} >= 2 &&
&has_command($apache::config{'apachectl_path'})) {
&clean_environment();
&system_logged("$apache::config{'apachectl_path'} graceful >/dev/null 2>&1");
&reset_environment();
}
}
my $init = &get_php_ini_bootup($file);
if ($init) {
# There's an associated FPM bootup action
&foreign_require("init");
&init::reload_action($init);
}
if ($file && &get_config_fmt($file) eq "ini" &&
&foreign_installed("virtual-server") &&
&foreign_installed("virtualmin-nginx")) {
&foreign_require("virtual-server");
&foreign_require("virtualmin-nginx", "virtual_feature.pl");
my @dom = grep { &is_under_directory($_->{'home'}, $file) }
&virtual_server::list_domains();
&virtualmin_nginx::feature_restart_web_php($dom[0])
if (@dom);
}
}
# should_switch_user(file)
# Returns 1 if file ops should be done as the access user
sub should_switch_user
{
my ($file) = @_;
return $access{'user'} && $access{'user'} ne 'root' && $< == 0 &&
!&is_under_directory("/etc", $file);
}
# get_config_as_user([file])
# Like get_config, but reads with permissions of the ACL user
sub get_config_as_user
{
local ($file) = @_;
if (&should_switch_user($file)) {
local $rv = &eval_as_unix_user(
$access{'user'}, sub { &get_config($file) });
if ((!$rv || !@$rv) && $!) {
&error(&text('file_eread', &html_escape($file), $!));
}
return $rv;
}
else {
return &get_config($file);
}
}
# read_file_contents_as_user(file)
sub read_file_contents_as_user
{
local ($file) = @_;
if (&should_switch_user($file)) {
return &eval_as_unix_user(
$access{'user'}, sub { &read_file_contents($file) });
}
else {
return &read_file_contents($file);
}
}
# write_file_contents_as_user(file, data)
# Writes out the contents of some file
sub write_file_contents_as_user
{
local ($file, $data) = @_;
if (&should_switch_user($file)) {
return &eval_as_unix_user(
$access{'user'}, sub { &write_file_contents($file, $data) });
}
else {
&write_file_contents($file, $data);
}
}
# read_file_lines_as_user(file, ...)
sub read_file_lines_as_user
{
local @args = @_;
if (&should_switch_user($file)) {
return &eval_as_unix_user(
$access{'user'}, sub { &read_file_lines(@args) });
}
else {
return &read_file_lines(@args);
}
}
# flush_file_lines_as_user(file)
# Writes out a file as the Unix user configured in this module's ACL
sub flush_file_lines_as_user
{
local ($file, $eof, $ignore) = @_;
if (&should_switch_user($file)) {
&eval_as_unix_user($access{'user'},
sub { &flush_file_lines($file, $eof, $ignore) });
}
else {
&flush_file_lines($file, $eof, $ignore);
}
}
# list_available_extensions(&conf, file)
# Returns a list of all available PHP extension modules
sub list_available_extensions
{
my ($conf, $file) = @_;
my $dir = &find_value("extension_dir", $conf);
if (!$dir) {
# Figure it out from the PHP command
my $binary = &get_php_ini_binary($file);
if ($binary) {
my $out = &backquote_command("$binary -i 2>/dev/null </dev/null");
if ($out =~ /extension_dir\s+=>\s+(\S+)/) {
$dir = $1;
}
}
}
if ($dir) {
# Get all the extensions
opendir(DIR, $dir);
my @exts = grep { /\.so$/ } readdir(DIR);
closedir(DIR);
return @exts;
}
return ();
}
# list_default_value(file, value, no-cache)
# Returns a list of all available PHP extension modules
sub list_default_value
{
my ($file, $value, $nocache) = @_;
my $binary = &get_php_ini_binary($file);
if ($binary) {
my $out = $main::list_default_value_cache{$binary};
if ($nocache || !$out) {
# Return defaults (without using any config file)
$out = &backquote_command("$binary --no-php-ini -i 2>/dev/null </dev/null");
$main::list_default_value_cache{$binary} = $out;
}
# Get default master value
if ($out =~ /\Q$value\E\s+\=>\s+\S+\s+\=>\s+(\S+)/) {
return $1;
}
}
return undef;
}
# opt_help(text, php-opt-name)
# Returns the link to the PHP manual for some option
sub opt_help
{
my ($text, $opt) = @_;
my $opt_name = $opt;
$opt_name =~ s/_/-/g;
my $php_opt_default = &list_default_value($in{'file'}, $opt);
my $optdef = defined($php_opt_default) ? $php_opt_default : "<em>$text{'opt_default_unknown'}</em>";
$php_opt_default = "<strong>".&text('opt_default', "<br>$opt = $optdef")."</strong>";
my $link = "https://www.php.net/$opt_name";
return "@{[&ui_text_wrap($text)]}".&ui_link($link, &ui_help($php_opt_default), 'ui_link_help', 'target="_blank"');
}
sub list_known_disable_functions
{
return ( "exec", "passthru", "shell_exec", "system", "proc_open", "popen", "curl_exec", "curl_multi_exec", "parse_ini_file", "show_source", "mail" );
}
# list_php_ini_modules(dir)
# Returns a list of hash refs with details of PHP module include files in
# a directory
sub list_php_ini_modules
{
my ($dir) = @_;
my @rv;
opendir(DIR, $dir);
foreach my $f (readdir(DIR)) {
next if ($f !~ /\.ini$/);
my $path = "$dir/$f";
my $ini = { 'file' => $f,
'path' => $path,
'dir' => $dir,
};
# Check for the extension line
my $lref = &read_file_lines($path, 1);
foreach my $l (@$lref) {
if ($l =~ /^\s*(;?)\s*(zend_)?extension\s*=\s*(\S+(\.so)?)/) {
$ini->{'enabled'} = $1 ? 0 : 1;
$ini->{'mod'} = $3;
$ini->{'mod'} =~ s/\.so$//;
}
}
if (-l $path) {
# Debian-style, where the link means that the module is enabled
$ini->{'link'} = &resolve_links($path);
$ini->{'enabled'} = 1;
}
push(@rv, $ini);
}
closedir(DIR);
my $availdir = &simplify_path("$dir/../../mods-available");
if (opendir(DIR, $availdir)) {
# On debian, there is another directory of link destinations for all
# modules that are available
foreach my $f (readdir(DIR)) {
next if ($f !~ /\.ini$/);
my $path = "$availdir/$f";
my ($already) = grep { $_->{'link'} eq $path } @rv;
next if ($already);
my $ini = { 'file' => $f,
'path' => $path,
'dir' => $dir,
'enabled' => 0,
'available' => 1,
};
my $lref = &read_file_lines($path, 1);
foreach my $l (@$lref) {
if ($l =~ /^\s*(;?)\s*(zend_)?extension\s*=\s*(\S+(\.so)?)/) {
$ini->{'mod'} = $3;
$ini->{'mod'} =~ s/\.so$//;
}
}
push(@rv, $ini);
}
closedir(DIR);
}
return sort { $a->{'mod'} cmp $b->{'mod'} } @rv;
}
# enable_php_ini_module(&ini, enabled?)
# Enable or disable a module loaded from a php.ini include file
sub enable_php_ini_module
{
my ($ini, $enable) = @_;
return if ($ini->{'enabled'} == $enable);
if ($ini->{'link'} || $ini->{'available'}) {
# Enable is done via a symlink
if ($enable && $ini->{'available'}) {
# Create the link
my ($dis) = glob($ini->{'dir'}."/*-".$ini->{'mod'}.
".ini.disabled");
if ($dis) {
my $newlink = $dis;
$newlink =~ s/\.disabled$//;
&rename_logged($dis, $newlink);
}
else {
my $newlink = $ini->{'dir'}."/10-".$ini->{'mod'}.".ini";
&symlink_logged($ini->{'path'}, $newlink);
}
}
elsif (!$enable && $ini->{'link'}) {
# Rename the link
&rename_logged($ini->{'path'}, $ini->{'path'}.".disabled");
}
}
else {
# Just edit the extension= line and comment in or out
&lock_file($ini->{'path'});
my $lref = &read_file_lines($ini->{'path'});
foreach my $l (@$lref) {
if ($enable && !$ini->{'enabled'}) {
$l =~ s/^\s*;\s*(extension\s*=\s*(\S+)(\.so)?)/$1/;
}
elsif (!$enable && $ini->{'enabled'}) {
$l =~ s/^\s*(extension\s*=\s*(\S+)(\.so)?)/;$1/;
}
}
&flush_file_lines($ini->{'path'});
&unlock_file($ini->{'path'});
}
}
# php_module_packages(mod, version, version-from-filename)
# Returns possible package names for a given PHP module and PHP version
sub php_module_packages
{
my ($m, $fullver, $filever) = @_;
&foreign_require("software");
my $ver = $fullver;
$ver =~ s/^(\d+\.\d+)\..*$/$1/;
my $nodotphpver = $ver;
$nodotphpver =~ s/\.//;
my @poss;
if ($software::update_system eq "csw") {
# On Solaris, packages are named like php52_mysql
push(@poss, "php".$nodotphpver."_".$m);
}
elsif ($software::update_system eq "ports") {
# On FreeBSD, names are like php52-mysql
push(@poss, "php".$nodotphpver."-".$m);
}
else {
if ($software::update_system eq "apt") {
push(@poss, "php".$ver."-".$m);
}
else {
push(@poss, "php".$nodotphpver."-".$m);
push(@poss, "php".$nodotphpver."-php-pecl-".$m);
}
if ($software::update_system eq "apt" && $m eq "pdo_mysql") {
# On Debian, the pdo_mysql module is in the mysql module
push(@poss, "php".$ver."-mysql", "php-mysql");
}
elsif ($software::update_system eq "yum" &&
($m eq "domxml" || $m eq "dom") && $ver >= 5) {
# On Redhat, the domxml module is in php-domxml
push(@poss, "php".$nodotphpver."-xml", "php-xml");
}
if ($ver =~ /\./ && $software::update_system eq "yum") {
# PHP 5.3+ packages from software collections are
# named like php54-php-mysql or sometimes even
# php54-php-mysqlnd
unshift(@poss, "php".$nodotphpver."-php-".$m);
unshift(@poss, "rh-php".$nodotphpver."-php-".$m);
if ($m eq "mysql") {
unshift(@poss, "rh-php".$nodotphpver.
"-php-mysqlnd");
}
}
elsif ($software::update_system eq "yum" &&
$fullphpver =~ /^5\.3/) {
# If PHP 5.3 is being used, packages may start with
# php53- or rh-php53-
my @vposs = grep { /^php5-/ } @poss;
push(@poss, map { my $p = $_;
$p =~ s/php5/php53/;
($p, "rh-".$p) } @vposs);
}
unshift(@poss, "php-".$m) if (!$filever);
}
return @poss;
}
1;